<div dir="ltr">Hello guys! I inited bsc and bts сfg succesfuly, but I got a problem.<br><br><0004> abis_rsl.c:1922 (bts=0,trx=0,ts=2,ss=0) Activating ARFCN(60) SS(0) lctype TCH_F r=OTHER ra=0x57 ta=38<br><0004> abis_rsl.c:595 (bts=0,trx=0,ts=2,pchan=TCH/F) Tx RSL Channel Activate with act_type=INITIAL<br><0004> abis_rsl.c:1231 (bts=0,trx=0,ts=2,ss=0) state NONE -> ACTIVATION REQUESTED<br><0004> abis_rsl.c:1603 (bts=0,trx=0,ts=2,ss=0) CHANNEL ACTIVATE ACK<br><0004> abis_rsl.c:1231 (bts=0,trx=0,ts=2,ss=0) state ACTIVATION REQUESTED -> ACTIVE<br><0004> abis_rsl.c:1721 (bts=0,trx=0,ts=2,ss=0) T3101 expired: no response to IMMEDIATE ASSIGN<br><0004> abis_rsl.c:867 (bts=0,trx=0,ts=2,ss=0) RF Channel Release due to error: 1<br><0004> abis_rsl.c:777 (bts=0,trx=0,ts=2,ss=0) DEACTivate SACCH CMD<br><0004> abis_rsl.c:1231 (bts=0,trx=0,ts=2,ss=0) state ACTIVE -> RELEASE DUE ERROR<br><0004> abis_rsl.c:939 (bts=0,trx=0,ts=2,ss=0) RF CHANNEL RELEASE ACK<br><0004> abis_rsl.c:826 (bts=0,trx=0,ts=2,ss=0) is back in operation.<br><br>What's wrong? Full log files attached.<br></div><div class="gmail_extra"><br><div class="gmail_quote">2017-11-28 2:20 GMT+03:00 Vadim Yanitskiy <span dir="ltr"><<a href="mailto:axilirator@gmail.com" target="_blank">axilirator@gmail.com</a>></span>:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Hi Sandi,<span class=""><br><br>> here are the log output from my transceiver :<br>> <a href="https://pastebin.com/8Y1qXWh8" target="_blank">https://pastebin.com/8Y1qXWh8</a><br><br></span>According to the attached log, you don't have any clock indications...<br><br>> sudo ./transceiver -a 51 -r 99<br>> ...<br>> <0011> trx.c:365 Setting C0 ARFCN to 51 (GSM900)<br><br>Please read the wiki carefully! You are doing wrong.<br>What are you expecting here? Please refer:<br><br><a href="http://osmocom.org/projects/baseband/wiki/CalypsoBTS#Clock-source" target="_blank">http://osmocom.org/projects/<wbr>baseband/wiki/CalypsoBTS#<wbr>Clock-source</a><br><br>> use RSSI or cell_log applications to find cells with good<br>> signal and remember the ARFCN numbers. One of them will be<br>> used as a clock source for our own base station.<br><br><a href="http://osmocom.org/projects/baseband/wiki/CalypsoBTS#OsmoNITB-configuration" target="_blank">http://osmocom.org/projects/<wbr>baseband/wiki/CalypsoBTS#<wbr>OsmoNITB-configuration</a><br><br>> Channel configuration<br>> <br>> Set a proper ARFCN for running BTS (don't confuse with<br>> a clock source). Also, set a corresponding band name.<br><br>The AFRCN value, passed to the OsmocomBB transceiver, is a<br>channel of the clock reference cell. The AFRCN value specified<br>in the OsmoNiTB configuration is a C0 channel of the BTS you<br>are going to run. Don't confuse them please.<span class=""><br><br>> I also tried with openbts, and the transceiver was terminated<br>> after I start ./transceiver -a 51 -r 99.<br><br></span>Again, read the wiki:<br><br><a href="http://osmocom.org/projects/baseband/wiki/CalypsoBTS#CalypsoBTS-with-OpenBTS" target="_blank">http://osmocom.org/projects/<wbr>baseband/wiki/CalypsoBTS#<wbr>CalypsoBTS-with-OpenBTS</a><br><br>> Run the TRX firmware on the phone as described above. No need to<br>> start transceiver, OpenBTS will run it automatically.<span class=""><br><br><br>> The BTS work with Sylvain/testing now,<br>> but not with jolly/testing branch.<br><br></span>I just tested the latest versions of OsmoNiTB & OsmoBTS.<br>Everything works as expected.<span class=""><br><br><div><div class="gmail_extra"><br clear="all"><div><div class="m_7842159362328590669gmail_signature"><div dir="ltr"><div><div dir="ltr"><div>With best regards,<br></div><div>Vadim Yanitskiy.<br></div></div></div></div></div></div>
<br></div></div></span></div>
</blockquote></div><br></div>