SMPP + OpenBSC

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.

tele tele at rhizomatica.org
Tue Apr 1 20:17:24 UTC 2014


I would say yes.

OTA Gateway <-> Kannel <-(smpp)-> OpenBSC

Kannel has different interfaces including a HTTP API interface.

:tele

On Tue, 01 Apr 2014 09:15:02 +0200
George News <george.news at gmx.net> wrote:

> Is with this configuration possible to send GSM 03.48 messages to a
> SIM card as for OTA programming?
> 
> 
> 
> On 31/03/2014 23:48, tele wrote:
> > Hi,
> > 
> > An example configuration for SMPP is the following:
> > 
> > smpp
> >  local-tcp-port 2775
> >  policy closed
> >  esme OSMPP
> >   password YOURPWD
> >   default-route
> > 
> > You do need an external SMSC that binds to OpenBSC using SMPP.
> > 
> > Please note that only SMS that are not for subscribers will go
> > through the SMPP interface, osmo-nitb check if the extension exists
> > in the HLR if not the SMS is sent through SMPP.
> > You can do prefix matching but it will still apply only for numbers
> > not in the HLR.
> > 
> > We did a dirty workaround in order to force all the SMS through
> > SMPP to a SMSC based on Kannel.
> > 
> > http://cgit.osmocom.org/openbsc/commit/?h=ciaby/rhizomatica&id=112393a6109ade98b997e6bc3d221d5a2e9dd402
> > 
> > Kannel is configured with a TX/RX bind towards OpenBSC. You may use
> > only a TRX. If you need help with Kannel config let me know
> > 
> > :tele
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > On Mon, 31 Mar 2014 18:42:25 +0200
> > "Jesús Vega Diaz" <wegadj at gmail.com> wrote:
> > 
> >> Hi all;
> >>
> >> I have deployed one ipaccess nanoBTS 1800, with OpenBSC (osmo-nitb)
> >> and all the osmocom suite apps.
> >>
> >> I have already make succesfully GSM calls, SMS, and GPRS/EDGE
> >> packet data connections.
> >>
> >> I now want support for sending binary SMS, i have read that with
> >> SMPP i would can.
> >>
> >> I have compiled OpenBSC with SMPP but now I don´t know how to use
> >> it, i think it is in the OpenBSC vty, but i don´t know the
> >> commands or how to use the interface.
> >>
> >> If you can give me some light in this thread i will grant you.
> >>
> >> Sorry for my English
> >> Best Regards
> >>
> >> Jesús Vega Diaz
> > 
> > 
> > 





More information about the OpenBSC mailing list