This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
George News george.news at gmx.netThe idea is to use a mobile phone on an OpenBSC network to send a GSM 03.48 message to it from OpenBSC. I will further look at Kannel and have an idea on can I interact with SMPP, although using SMPP can be also a choice, can't be? Any tip on sending the SMS directly using SMPP? On 01/04/2014 22:17, tele wrote: > I would say yes. > > OTA Gateway <-> Kannel <-(smpp)-> OpenBSC > > Kannel has different interfaces including a HTTP API interface. > > :tele > > On Tue, 01 Apr 2014 09:15:02 +0200 > George News <george.news at gmx.net> wrote: > >> Is with this configuration possible to send GSM 03.48 messages to a >> SIM card as for OTA programming? >> >> >> >> On 31/03/2014 23:48, tele wrote: >>> Hi, >>> >>> An example configuration for SMPP is the following: >>> >>> smpp >>> local-tcp-port 2775 >>> policy closed >>> esme OSMPP >>> password YOURPWD >>> default-route >>> >>> You do need an external SMSC that binds to OpenBSC using SMPP. >>> >>> Please note that only SMS that are not for subscribers will go >>> through the SMPP interface, osmo-nitb check if the extension exists >>> in the HLR if not the SMS is sent through SMPP. >>> You can do prefix matching but it will still apply only for numbers >>> not in the HLR. >>> >>> We did a dirty workaround in order to force all the SMS through >>> SMPP to a SMSC based on Kannel. >>> >>> http://cgit.osmocom.org/openbsc/commit/?h=ciaby/rhizomatica&id=112393a6109ade98b997e6bc3d221d5a2e9dd402 >>> >>> Kannel is configured with a TX/RX bind towards OpenBSC. You may use >>> only a TRX. If you need help with Kannel config let me know >>> >>> :tele >>> >>> >>> >>> >>> >>> >>> >>> On Mon, 31 Mar 2014 18:42:25 +0200 >>> "Jesús Vega Diaz" <wegadj at gmail.com> wrote: >>> >>>> Hi all; >>>> >>>> I have deployed one ipaccess nanoBTS 1800, with OpenBSC (osmo-nitb) >>>> and all the osmocom suite apps. >>>> >>>> I have already make succesfully GSM calls, SMS, and GPRS/EDGE >>>> packet data connections. >>>> >>>> I now want support for sending binary SMS, i have read that with >>>> SMPP i would can. >>>> >>>> I have compiled OpenBSC with SMPP but now I don´t know how to use >>>> it, i think it is in the OpenBSC vty, but i don´t know the >>>> commands or how to use the interface. >>>> >>>> If you can give me some light in this thread i will grant you. >>>> >>>> Sorry for my English >>>> Best Regards >>>> >>>> Jesús Vega Diaz >>> >>> >>> > > >