This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
George News george.news at gmx.netIs with this configuration possible to send GSM 03.48 messages to a SIM card as for OTA programming? On 31/03/2014 23:48, tele wrote: > Hi, > > An example configuration for SMPP is the following: > > smpp > local-tcp-port 2775 > policy closed > esme OSMPP > password YOURPWD > default-route > > You do need an external SMSC that binds to OpenBSC using SMPP. > > Please note that only SMS that are not for subscribers will go through > the SMPP interface, osmo-nitb check if the extension exists in the HLR > if not the SMS is sent through SMPP. > You can do prefix matching but it will still apply only for numbers not > in the HLR. > > We did a dirty workaround in order to force all the SMS through SMPP to > a SMSC based on Kannel. > > http://cgit.osmocom.org/openbsc/commit/?h=ciaby/rhizomatica&id=112393a6109ade98b997e6bc3d221d5a2e9dd402 > > Kannel is configured with a TX/RX bind towards OpenBSC. You may use > only a TRX. If you need help with Kannel config let me know > > :tele > > > > > > > > On Mon, 31 Mar 2014 18:42:25 +0200 > "Jesús Vega Diaz" <wegadj at gmail.com> wrote: > >> Hi all; >> >> I have deployed one ipaccess nanoBTS 1800, with OpenBSC (osmo-nitb) >> and all the osmocom suite apps. >> >> I have already make succesfully GSM calls, SMS, and GPRS/EDGE packet >> data connections. >> >> I now want support for sending binary SMS, i have read that with SMPP >> i would can. >> >> I have compiled OpenBSC with SMPP but now I don´t know how to use it, >> i think it is in the OpenBSC vty, but i don´t know the commands or >> how to use the interface. >> >> If you can give me some light in this thread i will grant you. >> >> Sorry for my English >> Best Regards >> >> Jesús Vega Diaz > > >