This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Harald Welte laforge at gnumonks.orgI've now added support to print the BPORT configuration within bs11_config, please use git revision 5f5189e658a146ff651103ceacfb151e92fe3fa1 This way you should be able to check if both BPORT objects exist and are both set to multidrop mode. On my single-BS11 setup it looks like this: bs11_config (C) 2009-2010 by Harald Welte and Dieter Spaar This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY LMT LOGON: ACK PHASE: 3 Normal MBCCU0: Load MBCCU1: Load Abis-link: Restoring BS11 ATTRIBUTES: BS-11 ESN PCB Serial Number: 001115 BS-11 ESN Hardware Code Number: 135-2044/03.07 BS-11 ESN Firmware Code Number: 135-2044/03.07 PLL Set Value=1110, Work Value=1110 SITE MANAGER ATTRIBUTES: E1 Channel: Port=0 Timeslot=1 (Full Slot) TEI: 25 BS11 Line Interface ATTRIBUTES: PLL Mode: Standalone BS11 CCLK ATTRIBUTES: CCLK Accuracy: High (1) CCLK Type=0 BS11 Power Amplifier 0 ATTRIBUTES: TRX Power: 30mW (GSM) BPORT0 ATTRIBUTES: Line Configuration: Star (0) LMT LOGOFF: ACK -- - Harald Welte <laforge at gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)