This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Harald Welte laforge at gnumonks.orgThere is not a single post of you that included all the information,
like:
* tty output of "bs11_config dump" of both the BTS
* tty output of "bs11_config" regarding the A-bis link state of both BTS
* detailed list of the procedures that you have already tried, like switching
rx/tx wires
* detailed explanation how you have configured mISDN and the hfcmulti
driver to run multiple d-channels on one E1 link, i.e. applying
linux-2.6.30-hfcmulti-multibts.patch and specifying the correct module
parameters
If you really want to enable us to help you properly, please make sure you
are as detailed and as verbose as possible!
--
- Harald Welte <laforge at gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)