This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Thomas Ansorg kobayashi_maru at onlinehome.dehello the cables are built, now i want to use 2 bs11 in multi drop config. how do i connect the 2 bs11? the e1 comes from the pc to the 1st bs11 left half, left tx, right rx(front view). now i'm on the right half: to which port are the 2 bnc port from the 1st to the 2nd bs11 to be connected? i tried the 2 possible combinations, didn't work (with the openbsc.cfg.2-2). the 2 bs11 are both set to tei=25 (bs11_config told me so) a schematic would be perfect. second problem: the timer instructions in the openbsc.cfg.2-2 are not executable, the bsc_hack program stops there. i had to remove them. what's the matter with that, why don't these timer instructions work? answers in german *very* welcome! -- Wer Rechtschreibfehler findet, darf sie behalten!