Network initialization

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.

Bjoern Heller mailinglists at hellercom.de
Tue May 5 06:59:29 UTC 2009


So,

here is the console dump:

./bsc_hack -f 123 -a -c 602 -n 01
Allowing everyone?
DB: Database initialized.
DB: Database prepared.
1 device found
         id:             0
         Dprotocols:     00000018
         Bprotocols:     0000006e
         protocol:       0
         nrbchan:        30
         name:           hfc-e1.1
activate bchan
activate bchan
bootstrapping OML for BTS 0
Tue May  5 10:53:00 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=0)
Tue May  5 10:53:00 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=1)
Tue May  5 10:53:00 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF  
Um=(bts=0,trx=0,ts=1) E1=(0,2,1)
Tue May  5 10:53:00 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=2)
Tue May  5 10:53:00 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF  
Um=(bts=0,trx=0,ts=2) E1=(0,2,2)
Tue May  5 10:53:00 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=3)
Tue May  5 10:53:00 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF  
Um=(bts=0,trx=0,ts=3) E1=(0,2,3)
Tue May  5 10:53:00 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=4)
Tue May  5 10:53:00 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF  
Um=(bts=0,trx=0,ts=4) E1=(0,3,0)
Tue May  5 10:53:00 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=5)
Tue May  5 10:53:00 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF  
Um=(bts=0,trx=0,ts=5) E1=(0,3,1)
Tue May  5 10:53:00 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=6)
Tue May  5 10:53:00 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF  
Um=(bts=0,trx=0,ts=6) E1=(0,3,2)
Tue May  5 10:53:00 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=7)
Tue May  5 10:53:00 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF  
Um=(bts=0,trx=0,ts=7) E1=(0,3,3)
Tue May  5 10:53:00 2009 <0020> abis_nm.c:674 OC=SITE MANAGER(00)  
INST=(ff,ff,ff) Software Activated Report
bootstrapping OML for BTS 0
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=0)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=1)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF  
Um=(bts=0,trx=0,ts=1) E1=(0,2,1)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=2)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF  
Um=(bts=0,trx=0,ts=2) E1=(0,2,2)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=3)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF  
Um=(bts=0,trx=0,ts=3) E1=(0,2,3)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=4)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF  
Um=(bts=0,trx=0,ts=4) E1=(0,3,0)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=5)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF  
Um=(bts=0,trx=0,ts=5) E1=(0,3,1)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=6)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF  
Um=(bts=0,trx=0,ts=6) E1=(0,3,2)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=7)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF  
Um=(bts=0,trx=0,ts=7) E1=(0,3,3)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:674 OC=RADIO CARRIER(02)  
INST=(00,00,ff) STATE CHG: OP_STATE=Disabled AVAIL=In test(00)
bootstrapping OML for BTS 0
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=0)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=1)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF  
Um=(bts=0,trx=0,ts=1) E1=(0,2,1)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=2)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF  
Um=(bts=0,trx=0,ts=2) E1=(0,2,2)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=3)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF  
Um=(bts=0,trx=0,ts=3) E1=(0,2,3)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=4)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF  
Um=(bts=0,trx=0,ts=4) E1=(0,3,0)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=5)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF  
Um=(bts=0,trx=0,ts=5) E1=(0,3,1)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=6)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF  
Um=(bts=0,trx=0,ts=6) E1=(0,3,2)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1544 Set Chan Attr  
(bts=0,trx=0,ts=7)
Tue May  5 10:53:02 2009 <0020> abis_nm.c:1483 CONNECT TERR TRAF  
Um=(bts=0,trx=0,ts=7) E1=(0,3,3)
bootstrapping RSL for BTS/TRX (0/0) using MCC=602 MNC=1
Tue May  5 10:53:35 2009 <0020> abis_nm.c:674 OC=UNKNOWN(a4)  
INST=(00,ff,ff) Failure Event Report
Tue May  5 10:53:35 2009 <0020> abis_nm.c:674 OC=UNKNOWN(a4)  
INST=(00,ff,ff) STATE CHG:


The net wont become visible.
Maybe it is related to this line?

Tue May  5 10:53:02 2009 <0020> abis_nm.c:674 OC=RADIO CARRIER(02)  
INST=(00,00,ff) STATE CHG: OP_STATE=Disabled AVAIL=In test(00)


Best regards
Björn Heller


Am 05.05.2009 um 00:55 schrieb Bjoern Heller:

> Hello,
>
> I have an Issue related to my Debian OpenBSC.
> Every time I fire up openbsc everything goes well like the btse  
> alignement/db alignement on lmt and there are no errors on lmt.
> Only openBSC tells me after the initial state were the net should be  
> up, that the oc or some module(ill add more details later on today)  
> is "in test".
> So this looks like the issue to me why the net wont come up.
> But sometimes it works (sometimes it helps to restart the bts but it  
> wont help everytime).
> Im a bit curious why the In test is appearing while lmt (the gui  
> app) tells me that everything is as it should be...
> As far as I know this normally tells me that the object is in Test  
> mode and is checked because requested on lmt.
> May this also be a timing issue on the abis link?
> Im writing from iPhone in bed so enough for now.
> I would be glad if someone could help/ has an idea.
>
> By the way Ill be at SIGINT09 in Cologne helping out at the GSM  
> Workshop.
> Who will be there too?
>
> Best Regards
> Björn Heller

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Björn Heller
Jabber: tec at jabber.hellercom.de

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20090505/4c56a75a/attachment.htm>


More information about the OpenBSC mailing list