This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Harald Welte laforge at gnumonks.orgHi Holger! On Tue, Feb 24, 2009 at 04:22:30PM +0100, Holger Adams wrote: > I'm just trying to connect the E-1 host card to the BS-11, but I can't > get it work. The serial connection works fine, I'm also seeing the > "Abis-link: Restoring" message. this is strange, indeed. I have not yet seen this. > My hardware configuration: > > 1) I removed the green jumpers TB01 - TB04 > 2) Jumper settings below the Twinax-board: 1-4 ON, 5-8 OFF > > 3) HFC-E1: NT Mode, Config A (all jumpers on the left side to the left) > 4) 'hfcmulti' modprobed with 'dslot=1' > 5) Forced the BS-11 to use correct TEI and E1 slot by using 'bs11_config' did you verify the settings by using 'bs11_config query'? Is it really using the full timeslot 1 with TEI 25? I have seen a number of BS-11 with different default configuration. did you also apply the kernel patch for mISDN and actually use the recompiled/patched mISDN_core and hfcmulti modules? > Have I missed something? I put a scope upon the rx/tx pins - traffic > flows into both directions, so I think there's no collision (tx->tx, rx->rx) I think the TEI layer is not coming up in this case, so it is more a logical than a physical layer problem. -- - Harald Welte <laforge at gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6) -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: Digital signature URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20090228/11a5911d/attachment.bin>