Build failed in Jenkins: master-osmo-bts » trx,master,0,default,rpi4-raspbian10 #5080

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/jenkins-notifications@lists.osmocom.org/.

jenkins at lists.osmocom.org jenkins at lists.osmocom.org
Tue Mar 9 00:52:14 UTC 2021


See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=rpi4-raspbian10/5080/display/redirect>

Changes:


------------------------------------------
[...truncated 337.82 KB...]
-#01 lchan_bs_pwr_ctrl() -> BS power reduction: 0 -> 0 (expected 0)
-#02 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0)
-#02 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1e 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#02 lchan_bs_pwr_ctrl() -> BS power reduction: 0 -> 0 (expected 0)
-#03 exec_power_step() <- Enable DTXd
-#04 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(00), RXQUAL-FULL(7), RXLEV-SUB(30), RXQUAL-SUB(0)
-#04 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 00 1e 70 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#04 lchan_bs_pwr_ctrl() -> BS power reduction: 0 -> 0 (expected 0)
-#05 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(30), RXQUAL-FULL(3), RXLEV-SUB(30), RXQUAL-SUB(0)
-#05 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1e 1e 30 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#05 lchan_bs_pwr_ctrl() -> BS power reduction: 0 -> 0 (expected 0)
-#06 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(63), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0)
-#06 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 3f 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#06 lchan_bs_pwr_ctrl() -> BS power reduction: 0 -> 0 (expected 0)
-Test case verdict: SUCCESS
-
-Starting test case 'TC_rxqual_ber'
-#00 exec_power_step() <- State (re)set (current 16 dB, max 20 dB)
-#01 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0)
-#01 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1e 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#01 lchan_bs_pwr_ctrl() -> BS power reduction: 16 -> 16 (expected 16)
-#02 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0)
-#02 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1e 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#02 lchan_bs_pwr_ctrl() -> BS power reduction: 16 -> 16 (expected 16)
-#03 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(30), RXQUAL-FULL(1), RXLEV-SUB(30), RXQUAL-SUB(1)
-#03 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1e 1e 12 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#03 lchan_bs_pwr_ctrl() -> BS power reduction: 16 -> 16 (expected 16)
-#04 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(30), RXQUAL-FULL(2), RXLEV-SUB(30), RXQUAL-SUB(2)
-#04 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1e 1e 24 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#04 lchan_bs_pwr_ctrl() -> BS power reduction: 16 -> 16 (expected 16)
-#05 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(30), RXQUAL-FULL(3), RXLEV-SUB(30), RXQUAL-SUB(3)
-#05 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1e 1e 36 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#05 lchan_bs_pwr_ctrl() -> BS power reduction: 16 -> 16 (expected 16)
-#06 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(30), RXQUAL-FULL(4), RXLEV-SUB(30), RXQUAL-SUB(4)
-#06 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1e 1e 48 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#06 lchan_bs_pwr_ctrl() -> BS power reduction: 16 -> 12 (expected 12)
-#07 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(34), RXQUAL-FULL(5), RXLEV-SUB(34), RXQUAL-SUB(5)
-#07 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 22 22 5a 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#07 lchan_bs_pwr_ctrl() -> BS power reduction: 12 -> 8 (expected 8)
-#08 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(38), RXQUAL-FULL(6), RXLEV-SUB(38), RXQUAL-SUB(6)
-#08 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 26 26 6c 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#08 lchan_bs_pwr_ctrl() -> BS power reduction: 8 -> 4 (expected 4)
-#09 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(42), RXQUAL-FULL(7), RXLEV-SUB(42), RXQUAL-SUB(7)
-#09 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 2a 2a 7e 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#09 lchan_bs_pwr_ctrl() -> BS power reduction: 4 -> 0 (expected 0)
-#10 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(46), RXQUAL-FULL(7), RXLEV-SUB(46), RXQUAL-SUB(7)
-#10 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 2e 2e 7e 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#10 lchan_bs_pwr_ctrl() -> BS power reduction: 0 -> 0 (expected 0)
-#11 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(46), RXQUAL-FULL(0), RXLEV-SUB(46), RXQUAL-SUB(0)
-#11 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 2e 2e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#11 lchan_bs_pwr_ctrl() -> BS power reduction: 0 -> 2 (expected 2)
-#12 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(44), RXQUAL-FULL(0), RXLEV-SUB(44), RXQUAL-SUB(0)
-#12 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 2c 2c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#12 lchan_bs_pwr_ctrl() -> BS power reduction: 2 -> 4 (expected 4)
-#13 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(42), RXQUAL-FULL(0), RXLEV-SUB(42), RXQUAL-SUB(0)
-#13 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 2a 2a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#13 lchan_bs_pwr_ctrl() -> BS power reduction: 4 -> 6 (expected 6)
-#14 exec_power_step() <- State (re)set (current 0 dB, max 20 dB)
-#15 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(30), RXQUAL-FULL(7), RXLEV-SUB(30), RXQUAL-SUB(7)
-#15 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1e 1e 7e 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#15 lchan_bs_pwr_ctrl() -> BS power reduction: 0 -> 0 (expected 0)
-#16 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(30), RXQUAL-FULL(7), RXLEV-SUB(30), RXQUAL-SUB(7)
-#16 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1e 1e 7e 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#16 lchan_bs_pwr_ctrl() -> BS power reduction: 0 -> 0 (expected 0)
-Test case verdict: SUCCESS
-
-Starting test case 'TC_inval_dummy'
-#00 exec_power_step() <- State (re)set (current 16 dB, max 20 dB)
-#01 enc_meas_rep() -> Measurement Results (invalid): RXLEV-FULL(63), RXQUAL-FULL(7), RXLEV-SUB(63), RXQUAL-SUB(7)
-#01 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 3f 7f 7e 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#01 lchan_bs_pwr_ctrl() -> BS power reduction: 16 -> 16 (expected 16)
-#02 enc_meas_rep() -> Measurement Results (invalid): RXLEV-FULL(00), RXQUAL-FULL(0), RXLEV-SUB(00), RXQUAL-SUB(0)
-#02 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#02 lchan_bs_pwr_ctrl() -> BS power reduction: 16 -> 16 (expected 16)
-#03 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0)
-#03 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1e 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#03 lchan_bs_pwr_ctrl() -> BS power reduction: 16 -> 16 (expected 16)
-#04 exec_power_step() <- Dummy block
-#04 lchan_bs_pwr_ctrl() <- UL SACCH: 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 
-#04 lchan_bs_pwr_ctrl() -> BS power reduction: 16 -> 16 (expected 16)
-#05 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0)
-#05 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1e 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#05 lchan_bs_pwr_ctrl() -> BS power reduction: 16 -> 16 (expected 16)
-#06 exec_power_step() <- Dummy block
-#06 lchan_bs_pwr_ctrl() <- UL SACCH: 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 
-#06 lchan_bs_pwr_ctrl() -> BS power reduction: 16 -> 16 (expected 16)
-#07 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0)
-#07 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1e 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#07 lchan_bs_pwr_ctrl() -> BS power reduction: 16 -> 16 (expected 16)
-Test case verdict: SUCCESS
-
-Starting test case 'TC_ctrl_interval'
-#00 exec_power_step() <- State (re)set (current 0 dB, max 20 dB)
-#01 exec_power_step() <- (Re)set power control interval: 0 -> 0
-#02 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0)
-#02 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 3c 3c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#02 lchan_bs_pwr_ctrl() -> BS power reduction: 0 -> 2 (expected 2)
-#03 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0)
-#03 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 3c 3c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#03 lchan_bs_pwr_ctrl() -> BS power reduction: 2 -> 4 (expected 4)
-#04 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0)
-#04 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 3c 3c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#04 lchan_bs_pwr_ctrl() -> BS power reduction: 4 -> 6 (expected 6)
-#05 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0)
-#05 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 3c 3c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#05 lchan_bs_pwr_ctrl() -> BS power reduction: 6 -> 8 (expected 8)
-#06 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0)
-#06 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 0a 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#06 lchan_bs_pwr_ctrl() -> BS power reduction: 8 -> 4 (expected 4)
-#07 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0)
-#07 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 0a 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#07 lchan_bs_pwr_ctrl() -> BS power reduction: 4 -> 0 (expected 0)
-#08 exec_power_step() <- (Re)set power control interval: 0 -> 1
-#09 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0)
-#09 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 3c 3c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#09 lchan_bs_pwr_ctrl() -> BS power reduction: 0 -> 2 (expected 2)
-#10 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0)
-#10 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 3c 3c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#10 lchan_bs_pwr_ctrl() -> BS power reduction: 2 -> 2 (expected 2)
-#11 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0)
-#11 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 3c 3c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#11 lchan_bs_pwr_ctrl() -> BS power reduction: 2 -> 4 (expected 4)
-#12 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0)
-#12 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 3c 3c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#12 lchan_bs_pwr_ctrl() -> BS power reduction: 4 -> 4 (expected 4)
-#13 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0)
-#13 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 3c 3c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#13 lchan_bs_pwr_ctrl() -> BS power reduction: 4 -> 6 (expected 6)
-#14 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0)
-#14 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 3c 3c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#14 lchan_bs_pwr_ctrl() -> BS power reduction: 6 -> 6 (expected 6)
-#15 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0)
-#15 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 3c 3c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#15 lchan_bs_pwr_ctrl() -> BS power reduction: 6 -> 8 (expected 8)
-#16 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0)
-#16 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 3c 3c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#16 lchan_bs_pwr_ctrl() -> BS power reduction: 8 -> 8 (expected 8)
-#17 exec_power_step() <- (Re)set power control interval: 1 -> 2
-#18 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0)
-#18 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 0a 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#18 lchan_bs_pwr_ctrl() -> BS power reduction: 8 -> 4 (expected 4)
-#19 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0)
-#19 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 0a 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#19 lchan_bs_pwr_ctrl() -> BS power reduction: 4 -> 4 (expected 4)
-#20 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0)
-#20 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 0a 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#20 lchan_bs_pwr_ctrl() -> BS power reduction: 4 -> 4 (expected 4)
-#21 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0)
-#21 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 0a 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#21 lchan_bs_pwr_ctrl() -> BS power reduction: 4 -> 4 (expected 4)
-#22 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0)
-#22 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 0a 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#22 lchan_bs_pwr_ctrl() -> BS power reduction: 4 -> 0 (expected 0)
-Test case verdict: SUCCESS
-
-Starting test case 'TC_rxlev_hyst'
-#00 exec_power_step() <- State (re)set (current 12 dB, max 16 dB)
-#01 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(31), RXQUAL-FULL(0), RXLEV-SUB(31), RXQUAL-SUB(0)
-#01 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1f 1f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#01 lchan_bs_pwr_ctrl() -> BS power reduction: 12 -> 13 (expected 13)
-#02 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0)
-#02 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1c 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#02 lchan_bs_pwr_ctrl() -> BS power reduction: 13 -> 11 (expected 11)
-#03 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(33), RXQUAL-FULL(0), RXLEV-SUB(33), RXQUAL-SUB(0)
-#03 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 21 21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#03 lchan_bs_pwr_ctrl() -> BS power reduction: 11 -> 13 (expected 13)
-#04 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0)
-#04 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1c 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#04 lchan_bs_pwr_ctrl() -> BS power reduction: 13 -> 11 (expected 11)
-#05 exec_power_step() <- (Re)set RxLev params (thresh 27 .. 33, averaging is disabled)
-#06 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(31), RXQUAL-FULL(0), RXLEV-SUB(31), RXQUAL-SUB(0)
-#06 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1f 1f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#06 lchan_bs_pwr_ctrl() -> BS power reduction: 11 -> 11 (expected 11)
-#07 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0)
-#07 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1c 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#07 lchan_bs_pwr_ctrl() -> BS power reduction: 11 -> 11 (expected 11)
-#08 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(33), RXQUAL-FULL(0), RXLEV-SUB(33), RXQUAL-SUB(0)
-#08 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 21 21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#08 lchan_bs_pwr_ctrl() -> BS power reduction: 11 -> 11 (expected 11)
-#09 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0)
-#09 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1c 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#09 lchan_bs_pwr_ctrl() -> BS power reduction: 11 -> 11 (expected 11)
-Test case verdict: SUCCESS
-
-Starting test case 'TC_rxlev_pf_ewma'
-#00 exec_power_step() <- State (re)set (current 16 dB, max 30 dB)
-#01 exec_power_step() <- (Re)set RxLev params (thresh 30 .. 30, averaging is enabled)
-#02 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0)
-#02 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1e 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#02 lchan_bs_pwr_ctrl() -> BS power reduction: 16 -> 16 (expected 16)
-#03 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0)
-#03 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1e 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#03 lchan_bs_pwr_ctrl() -> BS power reduction: 16 -> 16 (expected 16)
-#04 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(26), RXQUAL-FULL(0), RXLEV-SUB(26), RXQUAL-SUB(0)
-#04 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1a 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#04 lchan_bs_pwr_ctrl() -> BS power reduction: 16 -> 14 (expected 14)
-#05 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(26), RXQUAL-FULL(0), RXLEV-SUB(26), RXQUAL-SUB(0)
-#05 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 1a 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#05 lchan_bs_pwr_ctrl() -> BS power reduction: 14 -> 11 (expected 11)
-#06 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(35), RXQUAL-FULL(0), RXLEV-SUB(35), RXQUAL-SUB(0)
-#06 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 23 23 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#06 lchan_bs_pwr_ctrl() -> BS power reduction: 11 -> 12 (expected 12)
-#07 enc_meas_rep() -> Measurement Results (valid): RXLEV-FULL(35), RXQUAL-FULL(0), RXLEV-SUB(35), RXQUAL-SUB(0)
-#07 lchan_bs_pwr_ctrl() <- UL SACCH: 06 15 23 23 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
-#07 lchan_bs_pwr_ctrl() -> BS power reduction: 12 -> 14 (expected 14)
-Test case verdict: SUCCESS
./testsuite.at:45: exit code was 1, expected 0
7. testsuite.at:41: 7. bs_power_loop (testsuite.at:41): FAILED (testsuite.at:45)



======================== ./tests/testsuite.dir/01/testsuite.log

#                             -*- compilation -*-
1. testsuite.at:4: testing paging ...
./testsuite.at:7: $OSMO_QEMU $abs_top_builddir/tests/paging/paging_test
stderr:
==3557==ASan runtime does not come first in initial library list; you should either link runtime to your application or manually preload it with LD_PRELOAD.
--- expout	2021-03-09 00:52:13.371381091 +0000
+++ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=rpi4-raspbian10/ws/tests/testsuite.dir/at-groups/1/stdout>	2021-03-09 00:52:13.371381091 +0000
@@ -1,24 +0,0 @@
-Testing that paging messages expire.
-Testing that paging messages expire with sleep.
-Fn:   AGCH: (bs_ag_blks_res=[0:7]
-002:  . . . . . . . . (BCCH)
-006:  0 1 1 1 1 1 1 1
-012:  0 0 1 1 1 1 1 1
-016:  0 0 0 1 1 1 1 1
-022:  0 0 0 0 1 1 1 1
-026:  0 0 0 0 0 1 1 1
-032:  0 0 0 0 0 0 1 1
-036:  0 0 0 0 0 0 0 1
-042:  0 0 0 0 0 0 0 0
-046:  0 0 0 0 0 0 0 0
-053:  . . . . . . . . (BCCH)
-057:  0 1 1 1 1 1 1 1
-063:  0 0 1 1 1 1 1 1
-067:  0 0 0 1 1 1 1 1
-073:  0 0 0 0 1 1 1 1
-077:  0 0 0 0 0 1 1 1
-083:  0 0 0 0 0 0 1 1
-087:  0 0 0 0 0 0 0 1
-093:  0 0 0 0 0 0 0 0
-097:  0 0 0 0 0 0 0 0
-Success
./testsuite.at:7: exit code was 1, expected 0
1. testsuite.at:4: 1. paging (testsuite.at:4): FAILED (testsuite.at:7)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE



More information about the jenkins-notifications mailing list