This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/jenkins-notifications@lists.osmocom.org/.
jenkins at lists.osmocom.org jenkins at lists.osmocom.orgSee <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=rpi4-raspbian10/5079/display/redirect> Changes: ------------------------------------------ [...truncated 316.58 KB...] - toa256 (before) = 6201 / 256 = 24 - lchan.rqd_ta (after) = 25 - toa256 (after) = 5945 / 256 = 23 -Step #25 - lchan.rqd_ta (before) = 25 - toa256 (before) = 5945 / 256 = 23 - lchan.rqd_ta (after) = 26 - toa256 (after) = 5689 / 256 = 22 -Step #26 - lchan.rqd_ta (before) = 26 - toa256 (before) = 5689 / 256 = 22 - lchan.rqd_ta (after) = 27 - toa256 (after) = 5433 / 256 = 21 -Step #27 - lchan.rqd_ta (before) = 27 - toa256 (before) = 5433 / 256 = 21 - lchan.rqd_ta (after) = 28 - toa256 (after) = 5177 / 256 = 20 -Step #28 - lchan.rqd_ta (before) = 28 - toa256 (before) = 5177 / 256 = 20 - lchan.rqd_ta (after) = 29 - toa256 (after) = 4921 / 256 = 19 -Step #29 - lchan.rqd_ta (before) = 29 - toa256 (before) = 4921 / 256 = 19 - lchan.rqd_ta (after) = 30 - toa256 (after) = 4665 / 256 = 18 -Step #30 - lchan.rqd_ta (before) = 30 - toa256 (before) = 4665 / 256 = 18 - lchan.rqd_ta (after) = 31 - toa256 (after) = 4409 / 256 = 17 -Step #31 - lchan.rqd_ta (before) = 31 - toa256 (before) = 4409 / 256 = 17 - lchan.rqd_ta (after) = 32 - toa256 (after) = 4153 / 256 = 16 -Step #32 - lchan.rqd_ta (before) = 32 - toa256 (before) = 4153 / 256 = 16 - lchan.rqd_ta (after) = 33 - toa256 (after) = 3897 / 256 = 15 -Step #33 - lchan.rqd_ta (before) = 33 - toa256 (before) = 3897 / 256 = 15 - lchan.rqd_ta (after) = 34 - toa256 (after) = 3641 / 256 = 14 -Step #34 - lchan.rqd_ta (before) = 34 - toa256 (before) = 3641 / 256 = 14 - lchan.rqd_ta (after) = 35 - toa256 (after) = 3385 / 256 = 13 -Step #35 - lchan.rqd_ta (before) = 35 - toa256 (before) = 3385 / 256 = 13 - lchan.rqd_ta (after) = 36 - toa256 (after) = 3129 / 256 = 12 -Step #36 - lchan.rqd_ta (before) = 36 - toa256 (before) = 3129 / 256 = 12 - lchan.rqd_ta (after) = 37 - toa256 (after) = 2873 / 256 = 11 -Step #37 - lchan.rqd_ta (before) = 37 - toa256 (before) = 2873 / 256 = 11 - lchan.rqd_ta (after) = 38 - toa256 (after) = 2617 / 256 = 10 -Step #38 - lchan.rqd_ta (before) = 38 - toa256 (before) = 2617 / 256 = 10 - lchan.rqd_ta (after) = 39 - toa256 (after) = 2361 / 256 = 9 -Step #39 - lchan.rqd_ta (before) = 39 - toa256 (before) = 2361 / 256 = 9 - lchan.rqd_ta (after) = 40 - toa256 (after) = 2105 / 256 = 8 -Step #40 - lchan.rqd_ta (before) = 40 - toa256 (before) = 2105 / 256 = 8 - lchan.rqd_ta (after) = 41 - toa256 (after) = 1849 / 256 = 7 -Step #41 - lchan.rqd_ta (before) = 41 - toa256 (before) = 1849 / 256 = 7 - lchan.rqd_ta (after) = 42 - toa256 (after) = 1593 / 256 = 6 -Step #42 - lchan.rqd_ta (before) = 42 - toa256 (before) = 1593 / 256 = 6 - lchan.rqd_ta (after) = 43 - toa256 (after) = 1337 / 256 = 5 -Step #43 - lchan.rqd_ta (before) = 43 - toa256 (before) = 1337 / 256 = 5 - lchan.rqd_ta (after) = 44 - toa256 (after) = 1081 / 256 = 4 -Step #44 - lchan.rqd_ta (before) = 44 - toa256 (before) = 1081 / 256 = 4 - lchan.rqd_ta (after) = 45 - toa256 (after) = 825 / 256 = 3 -Step #45 - lchan.rqd_ta (before) = 45 - toa256 (before) = 825 / 256 = 3 - lchan.rqd_ta (after) = 46 - toa256 (after) = 569 / 256 = 2 -Step #46 - lchan.rqd_ta (before) = 46 - toa256 (before) = 569 / 256 = 2 - lchan.rqd_ta (after) = 47 - toa256 (after) = 313 / 256 = 1 -Step #47 - lchan.rqd_ta (before) = 47 - toa256 (before) = 313 / 256 = 1 - lchan.rqd_ta (after) = 48 - toa256 (after) = 57 / 256 = 0 -Step #48 - lchan.rqd_ta (before) = 48 - toa256 (before) = 57 / 256 = 0 - lchan.rqd_ta (after) = 48 - toa256 (after) = 57 / 256 = 0 -Step #49 - lchan.rqd_ta (before) = 48 - toa256 (before) = 57 / 256 = 0 - lchan.rqd_ta (after) = 48 - toa256 (after) = 57 / 256 = 0 -Done. - ./testsuite.at:64: exit code was 1, expected 0 10. testsuite.at:61: 10. ta_control (testsuite.at:61): FAILED (testsuite.at:64) ======================== ./tests/testsuite.dir/08/testsuite.log # -*- compilation -*- 8. testsuite.at:48: testing tx_power ... ./testsuite.at:52: $abs_top_builddir/tests/tx_power/tx_power_test --- experr 2021-03-09 00:05:31.627543203 +0000 +++ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=rpi4-raspbian10/ws/tests/testsuite.dir/at-groups/8/stderr> 2021-03-09 00:05:31.647542421 +0000 @@ -1,50 +1 @@ -(bts=0,trx=1) power_ramp_start(cur=0, tgt=40000) -(bts=0,trx=1) Asked to ramp power up to 40000 mdBm, which exceeds P_max_out (33000) -(bts=0,trx=1) power_ramp_start(cur=0, tgt=33000) -(bts=0,trx=1) ramp_timer_cb(cur_pout=2000, tgt_pout=33000, ramp_att=31000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to -8000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=4000, tgt_pout=33000, ramp_att=29000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to -6000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=6000, tgt_pout=33000, ramp_att=27000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to -4000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=8000, tgt_pout=33000, ramp_att=25000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to -2000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=10000, tgt_pout=33000, ramp_att=23000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 0 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=12000, tgt_pout=33000, ramp_att=21000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 2000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=14000, tgt_pout=33000, ramp_att=19000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 4000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=16000, tgt_pout=33000, ramp_att=17000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 6000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=18000, tgt_pout=33000, ramp_att=15000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 8000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=20000, tgt_pout=33000, ramp_att=13000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 10000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=22000, tgt_pout=33000, ramp_att=11000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 12000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=24000, tgt_pout=33000, ramp_att=9000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 14000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=26000, tgt_pout=33000, ramp_att=7000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 16000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=28000, tgt_pout=33000, ramp_att=5000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 18000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=30000, tgt_pout=33000, ramp_att=3000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 20000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=32000, tgt_pout=33000, ramp_att=1000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 22000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=33000, tgt_pout=33000, ramp_att=0, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 23000 mdBm. -(bts=0,trx=1) power_ramp_start(cur=-10000, tgt=10000) -(bts=0,trx=1) ramp_timer_cb(cur_pout=0, tgt_pout=10000, ramp_att=10000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 0 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=2000, tgt_pout=10000, ramp_att=8000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 2000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=4000, tgt_pout=10000, ramp_att=6000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 4000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=6000, tgt_pout=10000, ramp_att=4000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 6000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=8000, tgt_pout=10000, ramp_att=2000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 8000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=10000, tgt_pout=10000, ramp_att=0, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 10000 mdBm. +==21211==ASan runtime does not come first in initial library list; you should either link runtime to your application or manually preload it with LD_PRELOAD. --- expout 2021-03-09 00:05:31.627543203 +0000 +++ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=rpi4-raspbian10/ws/tests/testsuite.dir/at-groups/8/stdout> 2021-03-09 00:05:31.627543203 +0000 @@ -1,32 +0,0 @@ -Testing tx_power calculation for sysmoBTS 1002 -Testing tx_power calculation for sysmoBTS 1020 -Testing tx_power calculation for sysmoBTS 1100 -Testing tx_power calculation for sysmoBTS 2050 -Testing tx_power ramping for sysmoBTS 1020 -Testing tx_power ramping for sysmoBTS 1020 -CHANGE_POWER(-8000) -CHANGE_POWER(-6000) -CHANGE_POWER(-4000) -CHANGE_POWER(-2000) -CHANGE_POWER(0) -CHANGE_POWER(2000) -CHANGE_POWER(4000) -CHANGE_POWER(6000) -CHANGE_POWER(8000) -CHANGE_POWER(10000) -CHANGE_POWER(12000) -CHANGE_POWER(14000) -CHANGE_POWER(16000) -CHANGE_POWER(18000) -CHANGE_POWER(20000) -CHANGE_POWER(22000) -CHANGE_POWER(23000) -power_ramp finished -Testing tx_power ramping for osmo-bts-trx after lock -CHANGE_POWER(0) -CHANGE_POWER(2000) -CHANGE_POWER(4000) -CHANGE_POWER(6000) -CHANGE_POWER(8000) -CHANGE_POWER(10000) -power_ramp finished ./testsuite.at:52: exit code was 1, expected 0 8. testsuite.at:48: 8. tx_power (testsuite.at:48): FAILED (testsuite.at:52) ======================== ./tests/testsuite.dir/05/testsuite.log # -*- compilation -*- 5. testsuite.at:28: testing handover ... ./testsuite.at:31: $abs_top_builddir/tests/handover/handover_test stderr: ==21172==ASan runtime does not come first in initial library list; you should either link runtime to your application or manually preload it with LD_PRELOAD. --- expout 2021-03-09 00:05:31.427551014 +0000 +++ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=rpi4-raspbian10/ws/tests/testsuite.dir/at-groups/5/stdout> 2021-03-09 00:05:31.427551014 +0000 @@ -1 +0,0 @@ -Success ./testsuite.at:31: exit code was 1, expected 0 5. testsuite.at:28: 5. handover (testsuite.at:28): FAILED (testsuite.at:31) Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE