This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/jenkins-notifications@lists.osmocom.org/.
jenkins at lists.osmocom.org jenkins at lists.osmocom.orgSee <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master-debian9/10358/display/redirect> ------------------------------------------ [...truncated 1.16 MB...] ## ----------------------------------- ## ## osmo-msc 1.3.1.84-265a4 test suite. ## ## ----------------------------------- ## Regression tests. 1: smpp ok 2: sms_queue_test ok 3: msc_vlr_test_no_authen FAILED (testsuite.at:23) 4: msc_vlr_test_gsm_authen FAILED (testsuite.at:30) 5: msc_vlr_test_gsm_ciph FAILED (testsuite.at:37) 6: msc_vlr_test_umts_authen FAILED (testsuite.at:44) 7: msc_vlr_test_authen_reuse FAILED (testsuite.at:51) 8: msc_vlr_test_hlr_reject FAILED (testsuite.at:58) 9: msc_vlr_test_hlr_timeout FAILED (testsuite.at:65) 10: msc_vlr_test_ms_timeout FAILED (testsuite.at:72) 11: msc_vlr_test_reject_concurrency FAILED (testsuite.at:79) 12: msc_vlr_test_call FAILED (testsuite.at:86) 13: msc_vlr_test_rest FAILED (testsuite.at:93) 14: msc_vlr_test_ss FAILED (testsuite.at:100) ## ------------- ## ## Test results. ## ## ------------- ## ERROR: All 14 tests were run, 12 failed unexpectedly. ## -------------------------- ## ## testsuite.log was created. ## ## -------------------------- ## Please send `tests/testsuite.log' and all information you think might help: To: <openbsc at lists.osmocom.org> Subject: [osmo-msc 1.3.1.84-265a4] testsuite: 3 4 5 6 7 8 9 10 11 12 13 14 failed You may investigate any problem if you feel able to do so, in which case the test suite provides a good starting point. Its output may be found below `tests/testsuite.dir'. make[4]: *** [check-local] Error 1 Makefile:744: recipe for target 'check-local' failed make[4]: Leaving directory '/build/tests' make[3]: *** [check-am] Error 2 Makefile:557: recipe for target 'check-am' failed make[3]: Leaving directory '/build/tests' make[2]: *** [check-recursive] Error 1 Makefile:409: recipe for target 'check-recursive' failed make[2]: Leaving directory '/build/tests' Makefile:450: recipe for target 'check-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [check-recursive] Error 1 make: *** [check] Error 2 Makefile:741: recipe for target 'check' failed + cat-testlogs.sh ======================== ./tests/testsuite.dir/14/testsuite.log # -*- compilation -*- 14. testsuite.at:96: testing msc_vlr_test_ss ... ./testsuite.at:100: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss --- experr 2019-05-10 07:39:30.279424149 +0000 +++ /build/tests/testsuite.dir/at-groups/14/stderr 2019-05-10 07:39:30.295423950 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 14. testsuite.at:96: 14. msc_vlr_test_ss (testsuite.at:96): FAILED (testsuite.at:100) ======================== ./tests/testsuite.dir/11/testsuite.log # -*- compilation -*- 11. testsuite.at:75: testing msc_vlr_test_reject_concurrency ... ./testsuite.at:79: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency --- experr 2019-05-10 07:39:30.175425448 +0000 +++ /build/tests/testsuite.dir/at-groups/11/stderr 2019-05-10 07:39:30.195425198 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 11. testsuite.at:75: 11. msc_vlr_test_reject_concurrency (testsuite.at:75): FAILED (testsuite.at:79) ======================== ./tests/testsuite.dir/10/testsuite.log # -*- compilation -*- 10. testsuite.at:68: testing msc_vlr_test_ms_timeout ... ./testsuite.at:72: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout --- experr 2019-05-10 07:39:30.147425797 +0000 +++ /build/tests/testsuite.dir/at-groups/10/stderr 2019-05-10 07:39:30.159425647 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 10. testsuite.at:68: 10. msc_vlr_test_ms_timeout (testsuite.at:68): FAILED (testsuite.at:72) ======================== ./tests/testsuite.dir/09/testsuite.log # -*- compilation -*- 9. testsuite.at:61: testing msc_vlr_test_hlr_timeout ... ./testsuite.at:65: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout --- experr 2019-05-10 07:39:30.119426146 +0000 +++ /build/tests/testsuite.dir/at-groups/9/stderr 2019-05-10 07:39:30.135425947 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 9. testsuite.at:61: 9. msc_vlr_test_hlr_timeout (testsuite.at:61): FAILED (testsuite.at:65) ======================== ./tests/testsuite.dir/07/testsuite.log # -*- compilation -*- 7. testsuite.at:47: testing msc_vlr_test_authen_reuse ... ./testsuite.at:51: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse --- experr 2019-05-10 07:39:30.047427045 +0000 +++ /build/tests/testsuite.dir/at-groups/7/stderr 2019-05-10 07:39:30.063426846 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 7. testsuite.at:47: 7. msc_vlr_test_authen_reuse (testsuite.at:47): FAILED (testsuite.at:51) ======================== ./tests/testsuite.dir/06/testsuite.log # -*- compilation -*- 6. testsuite.at:40: testing msc_vlr_test_umts_authen ... ./testsuite.at:44: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen --- experr 2019-05-10 07:39:30.003427595 +0000 +++ /build/tests/testsuite.dir/at-groups/6/stderr 2019-05-10 07:39:30.027427295 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 6. testsuite.at:40: 6. msc_vlr_test_umts_authen (testsuite.at:40): FAILED (testsuite.at:44) ======================== ./tests/testsuite.dir/13/testsuite.log # -*- compilation -*- 13. testsuite.at:89: testing msc_vlr_test_rest ... ./testsuite.at:93: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest --- experr 2019-05-10 07:39:30.243424598 +0000 +++ /build/tests/testsuite.dir/at-groups/13/stderr 2019-05-10 07:39:30.263424349 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 13. testsuite.at:89: 13. msc_vlr_test_rest (testsuite.at:89): FAILED (testsuite.at:93) ======================== ./tests/testsuite.dir/04/testsuite.log # -*- compilation -*- 4. testsuite.at:26: testing msc_vlr_test_gsm_authen ... ./testsuite.at:30: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen --- experr 2019-05-10 07:39:29.931428493 +0000 +++ /build/tests/testsuite.dir/at-groups/4/stderr 2019-05-10 07:39:29.955428194 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 4. testsuite.at:26: 4. msc_vlr_test_gsm_authen (testsuite.at:26): FAILED (testsuite.at:30) ======================== ./tests/testsuite.dir/05/testsuite.log # -*- compilation -*- 5. testsuite.at:33: testing msc_vlr_test_gsm_ciph ... ./testsuite.at:37: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph --- experr 2019-05-10 07:39:29.967428044 +0000 +++ /build/tests/testsuite.dir/at-groups/5/stderr 2019-05-10 07:39:29.991427745 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 5. testsuite.at:33: 5. msc_vlr_test_gsm_ciph (testsuite.at:33): FAILED (testsuite.at:37) ======================== ./tests/testsuite.dir/08/testsuite.log # -*- compilation -*- 8. testsuite.at:54: testing msc_vlr_test_hlr_reject ... ./testsuite.at:58: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject --- experr 2019-05-10 07:39:30.083426596 +0000 +++ /build/tests/testsuite.dir/at-groups/8/stderr 2019-05-10 07:39:30.107426296 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 8. testsuite.at:54: 8. msc_vlr_test_hlr_reject (testsuite.at:54): FAILED (testsuite.at:58) ======================== ./tests/testsuite.dir/12/testsuite.log # -*- compilation -*- 12. testsuite.at:82: testing msc_vlr_test_call ... ./testsuite.at:86: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call --- experr 2019-05-10 07:39:30.211424998 +0000 +++ /build/tests/testsuite.dir/at-groups/12/stderr 2019-05-10 07:39:30.231424748 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 12. testsuite.at:82: 12. msc_vlr_test_call (testsuite.at:82): FAILED (testsuite.at:86) ======================== ./tests/testsuite.dir/03/testsuite.log # -*- compilation -*- 3. testsuite.at:19: testing msc_vlr_test_no_authen ... ./testsuite.at:23: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen --- experr 2019-05-10 07:39:29.891428993 +0000 +++ /build/tests/testsuite.dir/at-groups/3/stderr 2019-05-10 07:39:29.919428643 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 3. testsuite.at:19: 3. msc_vlr_test_no_authen (testsuite.at:19): FAILED (testsuite.at:23) Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE