Build failed in Jenkins: master-osmo-msc » --enable-iu,0,a3=default,a4=default,osmocom-master-debian9 #10357

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/jenkins-notifications@lists.osmocom.org/.

jenkins at lists.osmocom.org jenkins at lists.osmocom.org
Fri May 10 07:37:09 UTC 2019


See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master-debian9/10357/display/redirect>

------------------------------------------
[...truncated 1.07 MB...]
## ----------------------------------- ##
## osmo-msc 1.3.1.84-265a4 test suite. ##
## ----------------------------------- ##

Regression tests.

  1: smpp                                            ok
  2: sms_queue_test                                  ok
  3: msc_vlr_test_no_authen                          FAILED (testsuite.at:23)
  4: msc_vlr_test_gsm_authen                         FAILED (testsuite.at:30)
  5: msc_vlr_test_gsm_ciph                           FAILED (testsuite.at:37)
  6: msc_vlr_test_umts_authen                        FAILED (testsuite.at:44)
  7: msc_vlr_test_authen_reuse                       FAILED (testsuite.at:51)
  8: msc_vlr_test_hlr_reject                         FAILED (testsuite.at:58)
  9: msc_vlr_test_hlr_timeout                        FAILED (testsuite.at:65)
 10: msc_vlr_test_ms_timeout                         FAILED (testsuite.at:72)
 11: msc_vlr_test_reject_concurrency                 FAILED (testsuite.at:79)
 12: msc_vlr_test_call                               FAILED (testsuite.at:86)
 13: msc_vlr_test_rest                               FAILED (testsuite.at:93)
 14: msc_vlr_test_ss                                 FAILED (testsuite.at:100)

## ------------- ##
## Test results. ##
## ------------- ##

ERROR: All 14 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##

Please send `tests/testsuite.log' and all information you think might help:

   To: <openbsc at lists.osmocom.org>
   Subject: [osmo-msc 1.3.1.84-265a4] testsuite: 3 4 5 6 7 8 9 10 11 12 13 14 failed

You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point.  Its output may
be found below `tests/testsuite.dir'.

make[4]: *** [check-local] Error 1
Makefile:744: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
make[3]: *** [check-am] Error 2
Makefile:557: recipe for target 'check-am' failed
make[3]: Leaving directory '/build/tests'
Makefile:409: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
make[2]: *** [check-recursive] Error 1
make[1]: *** [check-recursive] Error 1
Makefile:450: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
Makefile:741: recipe for target 'check' failed
make: *** [check] Error 2
+ cat-testlogs.sh



======================== ./tests/testsuite.dir/14/testsuite.log

#                             -*- compilation -*-
14. testsuite.at:96: testing msc_vlr_test_ss ...
./testsuite.at:100: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss
--- experr	2019-05-10 07:37:09.005187529 +0000
+++ /build/tests/testsuite.dir/at-groups/14/stderr	2019-05-10 07:37:09.025187280 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work!
 DLMGCP MGCP client: using endpoint domain '@mgw'
 full talloc report on 'msgb' (total      0 bytes in   1 blocks)
 talloc_total_blocks(tall_bsc_ctx) == 17
14. testsuite.at:96: 14. msc_vlr_test_ss (testsuite.at:96): FAILED (testsuite.at:100)



======================== ./tests/testsuite.dir/11/testsuite.log

#                             -*- compilation -*-
11. testsuite.at:75: testing msc_vlr_test_reject_concurrency ...
./testsuite.at:79: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency
--- experr	2019-05-10 07:37:08.921188578 +0000
+++ /build/tests/testsuite.dir/at-groups/11/stderr	2019-05-10 07:37:08.941188327 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work!
 DLMGCP MGCP client: using endpoint domain '@mgw'
 full talloc report on 'msgb' (total      0 bytes in   1 blocks)
 talloc_total_blocks(tall_bsc_ctx) == 17
11. testsuite.at:75: 11. msc_vlr_test_reject_concurrency (testsuite.at:75): FAILED (testsuite.at:79)



======================== ./tests/testsuite.dir/10/testsuite.log

#                             -*- compilation -*-
10. testsuite.at:68: testing msc_vlr_test_ms_timeout ...
./testsuite.at:72: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout
--- experr	2019-05-10 07:37:08.897188877 +0000
+++ /build/tests/testsuite.dir/at-groups/10/stderr	2019-05-10 07:37:08.913188678 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work!
 DLMGCP MGCP client: using endpoint domain '@mgw'
 full talloc report on 'msgb' (total      0 bytes in   1 blocks)
 talloc_total_blocks(tall_bsc_ctx) == 17
10. testsuite.at:68: 10. msc_vlr_test_ms_timeout (testsuite.at:68): FAILED (testsuite.at:72)



======================== ./tests/testsuite.dir/09/testsuite.log

#                             -*- compilation -*-
9. testsuite.at:61: testing msc_vlr_test_hlr_timeout ...
./testsuite.at:65: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout
--- experr	2019-05-10 07:37:08.877189126 +0000
+++ /build/tests/testsuite.dir/at-groups/9/stderr	2019-05-10 07:37:08.885189027 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work!
 DLMGCP MGCP client: using endpoint domain '@mgw'
 full talloc report on 'msgb' (total      0 bytes in   1 blocks)
 talloc_total_blocks(tall_bsc_ctx) == 17
9. testsuite.at:61: 9. msc_vlr_test_hlr_timeout (testsuite.at:61): FAILED (testsuite.at:65)



======================== ./tests/testsuite.dir/07/testsuite.log

#                             -*- compilation -*-
7. testsuite.at:47: testing msc_vlr_test_authen_reuse ...
./testsuite.at:51: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse
--- experr	2019-05-10 07:37:08.817189876 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr	2019-05-10 07:37:08.837189626 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work!
 DLMGCP MGCP client: using endpoint domain '@mgw'
 full talloc report on 'msgb' (total      0 bytes in   1 blocks)
 talloc_total_blocks(tall_bsc_ctx) == 17
7. testsuite.at:47: 7. msc_vlr_test_authen_reuse (testsuite.at:47): FAILED (testsuite.at:51)



======================== ./tests/testsuite.dir/06/testsuite.log

#                             -*- compilation -*-
6. testsuite.at:40: testing msc_vlr_test_umts_authen ...
./testsuite.at:44: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen
--- experr	2019-05-10 07:37:08.789190225 +0000
+++ /build/tests/testsuite.dir/at-groups/6/stderr	2019-05-10 07:37:08.809189975 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work!
 DLMGCP MGCP client: using endpoint domain '@mgw'
 full talloc report on 'msgb' (total      0 bytes in   1 blocks)
 talloc_total_blocks(tall_bsc_ctx) == 17
6. testsuite.at:40: 6. msc_vlr_test_umts_authen (testsuite.at:40): FAILED (testsuite.at:44)



======================== ./tests/testsuite.dir/13/testsuite.log

#                             -*- compilation -*-
13. testsuite.at:89: testing msc_vlr_test_rest ...
./testsuite.at:93: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest
--- experr	2019-05-10 07:37:08.977187879 +0000
+++ /build/tests/testsuite.dir/at-groups/13/stderr	2019-05-10 07:37:08.993187679 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work!
 DLMGCP MGCP client: using endpoint domain '@mgw'
 full talloc report on 'msgb' (total      0 bytes in   1 blocks)
 talloc_total_blocks(tall_bsc_ctx) == 17
13. testsuite.at:89: 13. msc_vlr_test_rest (testsuite.at:89): FAILED (testsuite.at:93)



======================== ./tests/testsuite.dir/04/testsuite.log

#                             -*- compilation -*-
4. testsuite.at:26: testing msc_vlr_test_gsm_authen ...
./testsuite.at:30: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen
--- experr	2019-05-10 07:37:08.721191074 +0000
+++ /build/tests/testsuite.dir/at-groups/4/stderr	2019-05-10 07:37:08.741190824 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work!
 DLMGCP MGCP client: using endpoint domain '@mgw'
 full talloc report on 'msgb' (total      0 bytes in   1 blocks)
 talloc_total_blocks(tall_bsc_ctx) == 17
4. testsuite.at:26: 4. msc_vlr_test_gsm_authen (testsuite.at:26): FAILED (testsuite.at:30)



======================== ./tests/testsuite.dir/05/testsuite.log

#                             -*- compilation -*-
5. testsuite.at:33: testing msc_vlr_test_gsm_ciph ...
./testsuite.at:37: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph
--- experr	2019-05-10 07:37:08.753190675 +0000
+++ /build/tests/testsuite.dir/at-groups/5/stderr	2019-05-10 07:37:08.777190375 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work!
 DLMGCP MGCP client: using endpoint domain '@mgw'
 full talloc report on 'msgb' (total      0 bytes in   1 blocks)
 talloc_total_blocks(tall_bsc_ctx) == 17
5. testsuite.at:33: 5. msc_vlr_test_gsm_ciph (testsuite.at:33): FAILED (testsuite.at:37)



======================== ./tests/testsuite.dir/08/testsuite.log

#                             -*- compilation -*-
8. testsuite.at:54: testing msc_vlr_test_hlr_reject ...
./testsuite.at:58: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject
--- experr	2019-05-10 07:37:08.849189477 +0000
+++ /build/tests/testsuite.dir/at-groups/8/stderr	2019-05-10 07:37:08.865189277 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work!
 DLMGCP MGCP client: using endpoint domain '@mgw'
 full talloc report on 'msgb' (total      0 bytes in   1 blocks)
 talloc_total_blocks(tall_bsc_ctx) == 17
8. testsuite.at:54: 8. msc_vlr_test_hlr_reject (testsuite.at:54): FAILED (testsuite.at:58)



======================== ./tests/testsuite.dir/12/testsuite.log

#                             -*- compilation -*-
12. testsuite.at:82: testing msc_vlr_test_call ...
./testsuite.at:86: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call
--- experr	2019-05-10 07:37:08.949188229 +0000
+++ /build/tests/testsuite.dir/at-groups/12/stderr	2019-05-10 07:37:08.965188029 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work!
 DLMGCP MGCP client: using endpoint domain '@mgw'
 full talloc report on 'msgb' (total      0 bytes in   1 blocks)
 talloc_total_blocks(tall_bsc_ctx) == 17
12. testsuite.at:82: 12. msc_vlr_test_call (testsuite.at:82): FAILED (testsuite.at:86)



======================== ./tests/testsuite.dir/03/testsuite.log

#                             -*- compilation -*-
3. testsuite.at:19: testing msc_vlr_test_no_authen ...
./testsuite.at:23: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen
--- experr	2019-05-10 07:37:08.689191473 +0000
+++ /build/tests/testsuite.dir/at-groups/3/stderr	2019-05-10 07:37:08.709191223 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work!
 DLMGCP MGCP client: using endpoint domain '@mgw'
 full talloc report on 'msgb' (total      0 bytes in   1 blocks)
 talloc_total_blocks(tall_bsc_ctx) == 17
3. testsuite.at:19: 3. msc_vlr_test_no_authen (testsuite.at:19): FAILED (testsuite.at:23)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE



More information about the jenkins-notifications mailing list