This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Dario Lombardo dario.lombardo.ml at gmail.comOn Thu, Feb 28, 2013 at 1:01 PM, Erich Dachleger <edachleger at yahoo.com> wrote: > ./osmocon -p /dev/ttyUSB0 -m c123xor -c ../ > ../target/firmware/board/compal_e88/trx.compalram.bin ../ > ../target/firmware/board/compal_e88/chainload.highram.bin If I am not wrong, compalram image should be loaded as argument, while highram image should be passed to -c, so this command is wrong. > I also tried switching highram-compalram: > ./osmocon -p /dev/ttyUSB0 -m c123xor -c ../ > ../target/firmware/board/compal_e88/trx.highram.bin ../ > ../target/firmware/board/compal_e88/chainload.compalram.bin > That should be right: you're loading the chainloader that loads the trx. This looks like the command I used to load the TRX. But if you're getting the message "no such file" you're probably pointing to the wrong file names. Do an "ls" from the dir you're running the code to be sure you're pointing to right files. Last but not least: insist. Firmwares in my phones never load at the first try. Dario.