This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Pedro Pires hyermendain at gmail.comHello Eric if you pass the msg correct you have a space between ../ ../ , this dont have any space. you need to check the correct path. Use the command pwd On Thu, Feb 28, 2013 at 12:01 PM, Erich Dachleger <edachleger at yahoo.com> wrote: > Hi list, > I am trying, with no success so far ,to chain-load the trx-firmware on my > c118 with usb-serial-cable.: > > ------output----- > ./osmocon -p /dev/ttyUSB0 -m c123xor -c ../ > ../target/firmware/board/compal_e88/trx.compalram.bin ../ > ../target/firmware/board/compal_e88/chainload.highram.bin > got 2 bytes from modem, data looks like: 04 81 .. > got 5 bytes from modem, data looks like: 1b f6 02 00 41 ....A > got 1 bytes from modem, data looks like: 01 . > got 1 bytes from modem, data looks like: 40 @ > Received PROMPT1 from phone, responding with CMD > opening file: No such file or directory > ------------------------------------ > > I also tried switching highram-compalram: > ./osmocon -p /dev/ttyUSB0 -m c123xor -c ../ > ../target/firmware/board/compal_e88/trx.highram.bin ../ > ../target/firmware/board/compal_e88/chainload.compalram.bin > > And also > ./osmocon -p /dev/ttyUSB0 -m c123xor -c > target/firmware/board/compal_e88/trx.compalram.bin > target/firmware/board/compal_e88/chainload.highram.bin > > but got same errors. I used the script in the wiki for building the > toolchain prior to building the code. > ---------------------------------- > > Any ideas what might be wrong? > > Regards erich > >