Google project hosting is currently read only for network maintenance.
Here are general OpenBTS / UmTRX setup instructions. I'll post them
when write access is restored.
Download
=======
UHD
git://github.com/chemeris/UHD-Fairwaves.git fairwaves/umtrx-dboard
OpenBTS
git://github.com/ttsou/openbts-p2.8 umtrx
Follow standard build instructions.
http://files.ettus.com/uhd_docs/manual/html/build.html
http://wush.net/trac/rangepublic/wiki/BuildInstallRun
UmTRX Setup
===========
Configuration of the LMS6003D is through the control script
'umtrx_lms.py', which is installed in '/usr/local/share/uhd/utils'.
Calibration prior to operation is strongly recommended.
Example setup for ARFCN 925:
Initialization and auto-calibration:
./umtrx_lms.py --lms 1 --lms-init
./umtrx_lms.py --lms 1 --lms-tx-enable 1
./umtrx_lms.py --lms 1 --lms-rx-enable 1
./umtrx_lms.py --lms 1 --pll-ref-clock 26e6 --lpf-bandwidth-code
0x0f --lms-auto-calibration
RX LNA and RXVGA2 selection and gain control
./umtrx_lms.py --lms 1 --reg 0x75 --data 0xf0
./umtrx_lms.py --lms 1 --reg 0x65 --data 10
TX LPF control
./umtrx_lms.py --lms 1 --reg 0x34 --data 0x3e
LO leakage cancellation (calibration data values may vary)
./umtrx_lms.py --lms 1 --reg 0x42 --data 0x67
./umtrx_lms.py --lms 1 --reg 0x43 --data 0x89
TX/RX PLL charge pump current
./umtrx_lms.py --lms 1 --reg 0x16 --data 0x93
Tuning
./umtrx_lms.py --lms 1 --lms-rx-pll-tune 925.2e6
./umtrx_lms.py --lms 1 --lms-tx-pll-tune 880.2e6
TXVGA2 gain to max and enable PA
./umtrx_lms.py --lms 1 --reg 0x45 --data 0xc8
./umtrx_lms.py --lms 1 --lms-pa-on 2
Running OpenBTS
==============
Follow standard instructions.
http://wush.net/trac/rangepublic/wiki/BuildInstallRun
Thomas