Hi, Can anybody confirm the USB debug serial port settings. I have downloaded the FTDI drivers and can connect. However I do not get any meaningful output. Based on the source code I assume the settings are: · baudrate = 115200 · stop bits = 1 · parity = none · flow-control = off Regards Craig
Hi Craig. Virtual com port should work at 230400. Best regards, Andrey Sviyazov. (Sent from my mobile client) 25.02.2013 2:35 пользователь "Craig Reading" <craig.reading1@gmail.com> написал:
Hi,
Can anybody confirm the USB debug serial port settings. I have downloaded the FTDI drivers and can connect. However I do not get any meaningful output.
Based on the source code I assume the settings are:
· baudrate = 115200
· stop bits = 1
· parity = none
· flow-control = off
Regards Craig
participants (2)
-
Andrey Sviyazov -
Craig Reading