On Thu, Jan 27, 2011 at 02:25:31AM -0800, Farhad Abdolian wrote:
Hi Sylvain,
Thanks for posting it to the list, I just hit reply, I thought the list is the
main "to" part of the reply, but now I know, I have to put reply-all instead.
What I am using GR is use the AIR interface of the TETRA in a simple way, I
would like to create a system similar to OpenBTS to handle TETRA. The main
problem I have is I am a pure HW design engineer and my knowledge of Linux,
Python and high level SW is not very strong, but I am learning.
Please understand that it is quite a big task to do this. A receive-only
implementation like what we have now is relatively simple, but in order
to run a full TETRA system, you need to implement all the protocols like LLC,
LME, MM, CC and their associated logic, which is a huge task.
Getting something like a small transmitter goign that continuously transmits
a BSCH/BNCH should be a simple task that you can start with. Basically use
the same code that we use in conv_enc_test.c to generate the type-5 bits,
feed them into the DQPSK modulator and try to see if TETRA handsets can
recognize the signal.
--
- Harald Welte <laforge(a)gnumonks.org>
http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)