Hi Katharina,
thanks for your follow-up.
Can you please share which phone / modem models you have reproduced this with?
Maybe I can find the same in my collection.
I will try to run cardem on simtrace on a variety of different phones here and
see which ones work or don't work.
On Wed, May 26, 2021 at 03:03:38PM +0200, Katharina Kohls wrote:
BTW while debugging this I realized that the pin
layout might be documented
in the wrong order: The wiki says TX is on 4 (pin 1 = GND, pin 4 = TX, pin 5
= RX), however, for me it only worked when hooking up pin 5 with the RX of
my UART to USB. Is that a typo?
I've always using the 2.5mm stereo jack, as those are used in a lot of Osmocom
projects
starting with OsmocomBB more than a decade ago.
tHe 5-pin UART header was designed to match the FTDI USB-UART cable pin-out.
The schematics are available, they should definitely be the definitive source to
answer those kind of questions.
It states:
1 GND
2 CTS
3 VCC
4 DRXD (SAM3) = TXD of your UART cable
5 DRXD (SAM3) = RXD of your UART
6 CTS
Maybe the wiki could be further clarified?
--
- Harald Welte <laforge(a)osmocom.org>
http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)