Hello,guys
I use the official card reader,
root@debian:/usr/bin# pcsc_scan
Using reader plug'n play mechanism
Scanning present readers...
Waiting for the first reader...found one
Scanning present readers...
0: HID Global OMNIKEY 6121 Smart Card Reader [OMNIKEY 6121 Smart Card Reader] 00 00
Sat Jul 15 14:24:05 2023
Reader 0: HID Global OMNIKEY 6121 Smart Card Reader [OMNIKEY 6121 Smart Card Reader] 00
00
Event number: 0
Card state: Card inserted, Unresponsive card,
Because there are special symbols in the name of the card reader, so I set this in the
bankd configuration file csv
"1","0","HID Global OMNIKEY 6121 Smart Card Reader \[OMNIKEY 6121
Smart Card Reader\] 00 00"
And set up bankd like this. osmo-remsim-bankd -i 192.168.2.128 -n 1 -b 1
Because my server has a fixed ip
I put the simtrace2 link on the linux of client-st2, and set up client-st2. As follows
osmo-remsim-client-st2 --usb-vendor 1d50 --usb-product 60e3 --usb-interface 0
--usb-altsetting 0 --usb-address 3 --usb-path 1-1.1 --usb-config 1 --client-id 0
--client-slot 0 --server-ip 192.168.2.128 --server-port 9998
I saw them separately on sever. I tried to make their link. osmo-remsim-apitool -m 1 1 0
0
Because I read the instructions, when linking 1 simtrace2, our client-id and client-slot
need to be set to 0
When I link successfully, both bankd and client-st2 have wrong information. as follows
1987 DBANKDW INFO bankd_main.c:655 [000 CONN_WAIT_ID] Rx RSPRO connectClientReq(T=0,
N='openstick', SW='remsim-client', VER='1.0.0')
1987 DBANKDW INFO bankd_main.c:442 [000 CONN_WAIT_ID] Changing state to CONN_CLIENT
1987 DBANKDW INFO bankd_main.c:619 [000 CONN_CLIENT] No slotmap (yet) for client C(0:0)
1987 DBANKDW INFO bankd_main.c:450 [000 CONN_CLIENT] Changing state to
CONN_CLIENT_WAIT_MAP (timeout=10)
1987 DBANKDW INFO bankd_main.c:967 [000 CONN_CLIENT_WAIT_MAP] Error -2 occurred: Cleaning
up state
1987 DBANKDW INFO bankd_main.c:442 [000 CONN_CLIENT_WAIT_MAP] Changing state to ACCEPTING
TCP connection to server at 192.168.2.131:9999
DLINP NOTICE input/ipa.c:141 192.168.2.131:9999 connection done
DRSPRO NOTICE ../rspro_client_fsm.c:127 RSPRO_CLIENT(bankd){REESTABLISH}: RSPRO link to
192.168.2.131:9999 UP
DRSPRO ERROR ../rspro_client_fsm.c:297 RSPRO_CLIENT(bankd){REESTABLISH}: Event
SRVC_E_KA_TERMINATED not permitted
DRSPRO INFO ../rspro_client_fsm.c:302 RSPRO_CLIENT(bankd){REESTABLISH}: Destroying
existing connection to server
DRSPRO INFO ../rspro_client_fsm.c:307 RSPRO_CLIENT(bankd){REESTABLISH}: Creating TCP
connection to server at 192.168.2.131:9999
I'm wondering if I'm doing something wrong? What is the reason that led to such a
result! I'm looking forward to someone pointing out my mistakes. and help me. Thank
you so much. guys