The RSP1A and RSP2 work well for me using this code, and there are many improvements since my last post, so I'm looking for other people to help test it. Something along the lines of the following commands will allow installation and test using a temporary directory:

git clone https://github.com/willcode/gr-osmosdr cd gr-osmosdr git checkout sdrplay2 mkdir build cd build cmake -DCMAKE_INSTALL_PREFIX=/tmp/test -DENABLE_NONFREE=yes .. make mkdir /tmp/test make install LD_LIBRARY_PATH=/tmp/test/lib64:$LD_LIBRARY_PATH gqrx

This product does require a non-free library that gets compiled in to gr-osmosdr. This limits inclusion on distributions, but it's still easy to use from a PyBOMBs installation or a manual install, as above.

On 12/16/2017 04:54 PM, Jeff Long wrote:

I picked up a SDRplay RSP2 recently, and the gr-osmosdr support needed some work. Here's a rewrite that works with RSP2 and has other improvements. When the RSP1A comes in, I'll finish support for that. No plans to pick up a RSP1, but someone can see if this works if interested. This was tested against the Nov 2017 binary blob.

https://github.com/willcode/gr-osmosdr/tree/sdrplay2

=====

Complete rewrite of sdrplay support

• Supports RSP2
• Will support RSP1A when hardware arrives
• RSP1 is untested
• Uses streaming callbacks instead of polling
• Tuning, gain control imporoved, AGC supported
• Better performance (one less layer of buffers)