On 19 Nov 2017, at 2:56 pm, Cinaed Simson
<cinaed.simson(a)gmail.com> wrote:
There are a number of forks of rtl-sdr, but the one I use is from
https://github.com/osmocom/rtl-sdr.git
which has support for the bias tee.
I'm not familiar with the git URLs you posted.
When I built it from source I get everything - the binaries, the
includes and the libraries.
And rtl_fm worked.
As long as you don't randomly mix the source for the rtl-sdr and the
source for the librtlsdr from different forks it shouldn't matter.
-- Cinaed
On 11/18/2017 04:09 PM, vk4tec(a)tech-software.net wrote:
Hello
I am installing a satgate on the raspberry pi with an rtl dongle
I use the rtl_fm from the sources and I get an error about bias tee
I have had to use another source
Here is my install script
#!/bin/sh
clear
echo "VK4TEC SATGATE install"
echo " "
#sudo apt-get update
#sudo apt-get install cmake build-essential libusb-1.0-0-dev
git clone
https://github.com/niofis/rtl-sdr.git
cd rtl-sdr/
mkdir build
cd build
cmake ../
make
sudo make install
sudo ldconfig
git clone
https://www.github.com/wb2osz/direwolf
cd ~/direwolf
make
sudo make install
make install-rpi
make install-conf
cd ~
sudo mv sdr.old sdr.confcd ~
sudo cp sdr.conf sdr.old
cd ~
sudo apt-get uninstall rtl-sdr
sudo apt-get install rtl-sdr
sudo apt-get install librtlsdr-dev
/usr/bin/rtl_fm -f 145.825M - | direwolf -t 0 -dii -c sdr.conf -r 24000 -D 1
-
Andrew Rich Nov 2017