Hi all, after long struggles with a wrong #define in the atmel provided header file, I've finally made the SSC DMA handshaking working. After some more struggles, the samples are now arriving on the host PC and I can record data with arecord. I will be claning up things later today/tonight and should be able to publish some sample capture files as well as some documentation on the current state of the firwmare. Maintech/SR-Systems will then be doing some measurements on the captured spectrum, after which we hopefully can go into production. I would love to get the first production batch in time for OsmoDevCon2012. Regards, Harald -- - Harald Welte <laforge@gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)
FYI: The firmware status has improved significantly, It is now 'fully functional' in that it can tune, receive and stream digital spectrum via USB high-speed isochronuos transfers into a PC, where alsa happily receives them even at speeds in the range of 1MS/s. In contrast to earlier versions, SSC/DMA start and stop is now fully automatic with opening/closing the audio device on the USB host (Linux PC). Tuning cnanot yet be done via USB but has to be done on the UART. Commands like
tuner.init!
and
tuner.freq=88300000
can be used interactively on a mini embedded command line. For some more info on usage, check https://sdr.osmocom.org/trac/wiki/GettingStarted The RF guys should now be able to validate that the spectrum of the device is clean and thus authorize the production of the first batch of 100 units. With some luck, they will be available at OsmoDevCon ! Regards, Harald -- - Harald Welte <laforge@gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)
Authorization Required ----- Original Message ----- From: "Harald Welte" <laforge@gnumonks.org> To: <osmocom-sdr@lists.osmocom.org> Sent: Wednesday, February 29, 2012 2:53 AM Subject: Re: Status update OsmoSDR firmware
For some more info on usage, check https://sdr.osmocom.org/trac/wiki/GettingStarted
participants (2)
-
Harald Welte -
Juantxi