This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom BTS-side code (Abis, scheduling, ...)". The branch, sysmocom/0.3.5-stable has been updated via af0ed4ee1417d165a530dcfc319143c4989c1444 (commit) via 2112a7c333f984e8c03c3f675babf71943370f27 (commit) from dce6c09b30dd709467216d325bf38845a98fe75b (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-bts/commit/?id=af0ed4ee1417d165a530dcfc319143c… commit af0ed4ee1417d165a530dcfc319143c4989c1444 Author: Harald Welte <laforge(a)gnumonks.org> Date: Tue Feb 7 19:49:14 2017 +0100 sysmobts: fully support trx_power_params The simplistic approach of sysmobts_get_nominal_power() is insufficient to cope for devices that have an internal PA. The Actual transceiver board is driven to a certain level (0..23 dBm typically), and the external PA must be handled independent of that. Increasing the return value of sysmobts_get_nominal_power() would result in the sysmoBTS mainboard attempting to reach a higher power, which is wrong. This change affects sysmoBTS 1020 and 1100. It causes power-ramping to be used by default. For 1002 and 2050, no behavior change is expected. Change-Id: Ieff75d5becaa80a2097b6e744c75c2d16259c9a4 http://cgit.osmocom.org/osmo-bts/commit/?id=2112a7c333f984e8c03c3f675babf71… commit 2112a7c333f984e8c03c3f675babf71943370f27 Author: Harald Welte <laforge(a)gnumonks.org> Date: Tue Feb 7 19:58:41 2017 +0100 tx_power: Change PA calibration tables to use delta vales It seems more user friendly to look at a calibration table in terms of the delta (positive or negative) compared to the nominal gain value, rather than a collection of absolute gain values. It has the added benefit that the (API/data model) user doesn't have to specify a gain value for each ARFCN, but rather can rely on the default nominal gain in absence of a calibration table for this specific unit. Change-Id: I7311815902a88d2fc9d211cf4c62fa6fdc5e86ad ----------------------------------------------------------------------- Summary of changes: include/osmo-bts/tx_power.h | 2 +- src/common/tx_power.c | 4 ++-- src/osmo-bts-sysmo/l1_if.c | 3 ++- src/osmo-bts-sysmo/main.c | 48 +++++++++++++++++++++++++++++++++++++-- src/osmo-bts-sysmo/sysmobts_vty.c | 2 +- src/osmo-bts-sysmo/utils.c | 26 --------------------- src/osmo-bts-sysmo/utils.h | 2 -- 7 files changed, 52 insertions(+), 35 deletions(-) hooks/post-receive -- Osmocom BTS-side code (Abis, scheduling, ...)