This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom BTS-side code (Abis, scheduling, ...)". The branch, master has been updated via 6b4c6aa375bfe1d49594d8a43345dc6b5df917c3 (commit) from c4ac69dcc2bd3825e73f2a026dccc8813dcbe592 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-bts/commit/?id=6b4c6aa375bfe1d49594d8a43345dc6… commit 6b4c6aa375bfe1d49594d8a43345dc6b5df917c3 Author: Harald Welte <laforge(a)gnumonks.org> Date: Tue Feb 7 19:49:14 2017 +0100 sysmobts: fully support trx_power_params The simplistic approach of sysmobts_get_nominal_power() is insufficient to cope for devices that have an internal PA. The Actual transceiver board is driven to a certain level (0..23 dBm typically), and the external PA must be handled independent of that. Increasing the return value of sysmobts_get_nominal_power() would result in the sysmoBTS mainboard attempting to reach a higher power, which is wrong. This change affects sysmoBTS 1020 and 1100. It causes power-ramping to be used by default. For 1002 and 2050, no behavior change is expected. Change-Id: Ieff75d5becaa80a2097b6e744c75c2d16259c9a4 ----------------------------------------------------------------------- Summary of changes: src/osmo-bts-sysmo/l1_if.c | 46 ++++++++++++++++++++++++++++++++++++--- src/osmo-bts-sysmo/sysmobts_vty.c | 2 +- src/osmo-bts-sysmo/utils.c | 26 ---------------------- src/osmo-bts-sysmo/utils.h | 2 -- 4 files changed, 44 insertions(+), 32 deletions(-) hooks/post-receive -- Osmocom BTS-side code (Abis, scheduling, ...)