Hi All,
I have an issue where paging doesn't work when using osmo-cc-endpoint with tacs and a USRP1
I can place calls from the MS out over osmo-cc-endpoint via my pbx to the pstn with no problems, if I try to call back in via sip it always fails to page the MS
Running the -x option I can call between two MS stations with no issues, paging works and the calls connect
Here is an example if I run the command I can make calls from the mobile device and hear the music, I can also press d and call the MS back with no problem, paging appears to work 9/10 times
./tacs --sdr-uhd --channel 323 --channel 318 --channel 320 --samplerate 581818 --sdr-tx-antenna TX/RX --sdr-rx-antenna RX2 2342123456
amps.c: 932 info : (chan 323) Call to mobile station, paging station id '2342123456' amps.c:1186 info : (chan 323) Paging the phone frame.c:3693 info : (chan 323) RX Level: 79% Quality: 80% Polarity: POSITIVE amps.c: 832 info : (chan 323) Paging reply 2342123456 (ESN = removed, Class 3 / Continuous / 20 MHz, TIA/EIA-553 or IS-54A mobile station) amps.c:1170 info : (chan 323) Assigning channel to call to mobile station
here is the output with -o and an inbound call via sip
endpoint.c: 931 info : Handle message CC-ATTACH-REQ at state IDLE (callref 2) message.c: 516 info : IE_CALLING_INTERFACE name='sip' message.c: 588 info : IE_SOCKET_ADDRESS address='127.0.0.1:4201' endpoint.c: 390 info : Remote peer with socket address '127.0.0.1' and port '4201' and interface 'sip' attached to us. endpoint.c: 394 info : Changing message to CC-ATTACH-CNF. endpoint.c: 931 info : Handle message CC-ATTACH-RSP at state ATTACH-SENT (callref 1) message.c: 516 info : IE_CALLING_INTERFACE name='tacs' message.c: 588 info : IE_SOCKET_ADDRESS address='127.0.0.1:4200' endpoint.c: 308 info : Attached to remote peer "127.0.0.1:4201". UUUUUendpoint.c: 931 info : Handle message CC-SETUP-REQ at state IDLE (callref 3) message.c: 522 info : IE_CALLING_NETWORK type=4(sip) id='' message.c: 516 info : IE_CALLING_INTERFACE name='sip' message.c: 582 info : IE_SDP payload=v=0\no=root 2465 2465 IN IP4 x.x.x.x \ns=session\nc=IN IP4 x.x.x.x \nt=0 0\nm=audio 20644 RTP/AVP 0 8 101\na=rtpmap:0 PCMU/8000\na=rtpmap:8 PCMA/8000\na=rtpmap:101 telephone-event/8000\na=fmtp:101 0-16\na=silenceSupp:off - - - -\na=ptime:20\na=sendrecv\n message.c: 498 info : IE_CALLING type=0(unknown) plan=1(telephony), presentation=0(allowed), screening=3(network provided), number='55555555555' message.c: 510 info : IE_CALLING_NAME name='"55555555555"' message.c: 468 info : IE_CALLED type=0(unknown) plan=1(telephony) number='2342123456' message.c: 492 info : IE_COMPLETE message.c: 516 info : IE_CALLING_INTERFACE name='sip' call.c: 744 info : Received OSMO-CC call from fixed network '55555555555' to mobile '2342123456' call.c: 468 info : Indicate OSMO-CC answer towards fixed network endpoint.c: 931 info : Handle message CC-SETUP-CNF at state INIT-OUT (callref 3) message.c: 498 info : IE_CALLING type=4(subscriber) plan=1(telephony), presentation=0(allowed), screening=3(network provided), number='2342123456' message.c: 582 info : IE_SDP payload=v=0\no=- 3851253277 3851253277 IN IP4 127.0.0.1\ns=session\nc=IN IP4 127.0.0.1\nt=0 0\nm=audio 16384 RTP/AVP 8\na=rtpmap:8 PCMA/8000\n call.c: 751 info : Outgoing call from '55555555555' to '2342123456' amps.c: 932 info : (chan 323) Call to mobile station, paging station id '2342123456' transaction.c: 245 info : Transaction state IDLE -> PAGE transaction.c: 150 info : Created transaction for subscriber '2342123456' endpoint.c: 931 info : Handle message CC-SETUP-COMP-REQ at state CONNECTING-OUT (callref 3) amps.c:1186 info : (chan 323) Paging the phone transaction.c: 245 info : Transaction state PAGE -> PAGE SEND frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) transaction.c: 245 info : Transaction state PAGE SEND -> PAGE REPLY amps.c:1084 notice : (chan 323) Paging timeout, retrying transaction.c: 245 info : Transaction state PAGE REPLY -> PAGE amps.c:1186 info : (chan 323) Paging the phone transaction.c: 245 info : Transaction state PAGE -> PAGE SEND frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) transaction.c: 245 info : Transaction state PAGE SEND -> PAGE REPLY amps.c:1081 notice : (chan 323) Paging timeout, destroying transaction transaction.c: 245 info : Transaction state PAGE REPLY -> CALL RELEASE call.c: 566 info : Call has been released with cause=27 endpoint.c: 931 info : Handle message CC-DISC-REQ at state ACTIVE (callref 3) message.c: 564 info : IE_CAUSE location=10(beyond interworking) isdn_cause=16(normal call clearing) sip_cause=486 socket_cause=0(unset) call.c: 685 info : Received OSMO-CC disconnect from fixed network with cause 16 call.c: 686 info : Call disconnected, releasing! call.c: 495 info : Indicated OSMO-CC release towards fixed network endpoint.c: 931 info : Handle message CC-REL-IND at state DISCONNECTING-OUT (callref 3) message.c: 564 info : IE_CAUSE location=1(private network serving local user) isdn_cause=16(normal call clearing) sip_cause=468 socket_cause=0(unset) frame.c:3693 info : (chan 323) RX Level: 234% Quality: 29% Polarity: POSITIVE amps.c:1068 notice : (chan 323) Release timeout, destroying transaction transaction.c: 163 info : Destroying transaction for subscriber '2342123456'
Is this likely to the sdr, I can use multiple boards for tx/rx but I can't figure out how to expose the different cards in uhd as the list command doesn't seem to work for antenna
Any help appreciated.
Thanks
Dave
Hi Dave,
Can you try to add "-v 0" to command line? This way you get detailed message frame content in debug output. After the line "transaction.c: 245 info : Transaction state PAGE -> PAGE SEND" you will get several lines with all elements of the paging message. What do they look like for both cases (console and osmo-cc mode)? In my case they look both like this:
frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2732 debug : T1T2: 1 = First Word (FOCC) Next Word (FVC) (Type field) frame.c:2734 debug : DCC: 0 (Digital color code field) frame.c:2732 debug : MIN1: 2109785 = 2123456 (First part of the mobile identification number field) frame.c:2734 debug : P: 3175 (Parity field) frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) frame.c:2732 debug : T1T2: 2 = Next Word (FOCC) First Word (FVC) (Type field) frame.c:2732 debug : SCC: 3 = This word includes message (SAT color code) frame.c:2732 debug : MIN2: 123 = 234 (Second part of the mobile identification number field) frame.c:2732 debug : EF: 0 = No (Extended Protocol Forward Channel Indicator) frame.c:2734 debug : LOCAL/MSG TYPE: 0 (Message Type field) frame.c:2734 debug : ORDQ: 0 (Order qualifier field) frame.c:2734 debug : ORDER: 0 (Order field) frame.c:2742 debug : --> Page Message (Voice Service) frame.c:2734 debug : P: 424 (Parity field) frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2732 debug : T1T2: 1 = First Word (FOCC) Next Word (FVC) (Type field) frame.c:2734 debug : DCC: 0 (Digital color code field) frame.c:2732 debug : MIN1: 2109785 = 2123456 (First part of the mobile identification number field) frame.c:2734 debug : P: 3175 (Parity field) frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) frame.c:2732 debug : T1T2: 2 = Next Word (FOCC) First Word (FVC) (Type field) frame.c:2732 debug : SCC: 3 = This word includes message (SAT color code) frame.c:2732 debug : MIN2: 123 = 234 (Second part of the mobile identification number field) frame.c:2732 debug : EF: 0 = No (Extended Protocol Forward Channel Indicator) frame.c:2734 debug : LOCAL/MSG TYPE: 0 (Message Type field) frame.c:2734 debug : ORDQ: 0 (Order qualifier field) frame.c:2734 debug : ORDER: 0 (Order field) frame.c:2742 debug : --> Page Message (Voice Service) frame.c:2734 debug : P: 424 (Parity field) frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2732 debug : T1T2: 1 = First Word (FOCC) Next Word (FVC) (Type field) frame.c:2734 debug : DCC: 0 (Digital color code field) frame.c:2732 debug : MIN1: 2109785 = 2123456 (First part of the mobile identification number field) frame.c:2734 debug : P: 3175 (Parity field) frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) frame.c:2732 debug : T1T2: 2 = Next Word (FOCC) First Word (FVC) (Type field) frame.c:2732 debug : SCC: 3 = This word includes message (SAT color code) frame.c:2732 debug : MIN2: 123 = 234 (Second part of the mobile identification number field) frame.c:2732 debug : EF: 0 = No (Extended Protocol Forward Channel Indicator) frame.c:2734 debug : LOCAL/MSG TYPE: 0 (Message Type field) frame.c:2734 debug : ORDQ: 0 (Order qualifier field) frame.c:2734 debug : ORDER: 0 (Order field) frame.c:2742 debug : --> Page Message (Voice Service) frame.c:2734 debug : P: 424 (Parity field)
Regards,
Andreas
On 15.01.22 17:45, Dave wrote:
Hi All,
I have an issue where paging doesn't work when using osmo-cc-endpoint with tacs and a USRP1
I can place calls from the MS out over osmo-cc-endpoint via my pbx to the pstn with no problems, if I try to call back in via sip it always fails to page the MS
Running the -x option I can call between two MS stations with no issues, paging works and the calls connect
Here is an example if I run the command I can make calls from the mobile device and hear the music, I can also press d and call the MS back with no problem, paging appears to work 9/10 times
./tacs --sdr-uhd --channel 323 --channel 318 --channel 320 --samplerate 581818 --sdr-tx-antenna TX/RX --sdr-rx-antenna RX2 2342123456
amps.c: 932 info : (chan 323) Call to mobile station, paging station id '2342123456' amps.c:1186 info : (chan 323) Paging the phone frame.c:3693 info : (chan 323) RX Level: 79% Quality: 80% Polarity: POSITIVE amps.c: 832 info : (chan 323) Paging reply 2342123456 (ESN = removed, Class 3 / Continuous / 20 MHz, TIA/EIA-553 or IS-54A mobile station) amps.c:1170 info : (chan 323) Assigning channel to call to mobile station
here is the output with -o and an inbound call via sip
endpoint.c: 931 info : Handle message CC-ATTACH-REQ at state IDLE (callref 2) message.c: 516 info : IE_CALLING_INTERFACE name='sip' message.c: 588 info : IE_SOCKET_ADDRESS address='127.0.0.1:4201 http://127.0.0.1:4201' endpoint.c: 390 info : Remote peer with socket address '127.0.0.1' and port '4201' and interface 'sip' attached to us. endpoint.c: 394 info : Changing message to CC-ATTACH-CNF. endpoint.c: 931 info : Handle message CC-ATTACH-RSP at state ATTACH-SENT (callref 1) message.c: 516 info : IE_CALLING_INTERFACE name='tacs' message.c: 588 info : IE_SOCKET_ADDRESS address='127.0.0.1:4200 http://127.0.0.1:4200' endpoint.c: 308 info : Attached to remote peer "127.0.0.1:4201 http://127.0.0.1:4201". UUUUUendpoint.c: 931 info : Handle message CC-SETUP-REQ at state IDLE (callref 3) message.c: 522 info : IE_CALLING_NETWORK type=4(sip) id='' message.c: 516 info : IE_CALLING_INTERFACE name='sip' message.c: 582 info : IE_SDP payload=v=0\no=root 2465 2465 IN IP4 x.x.x.x \ns=session\nc=IN IP4 x.x.x.x \nt=0 0\nm=audio 20644 RTP/AVP 0 8 101\na=rtpmap:0 PCMU/8000\na=rtpmap:8 PCMA/8000\na=rtpmap:101 telephone-event/8000\na=fmtp:101 0-16\na=silenceSupp:off - - - -\na=ptime:20\na=sendrecv\n message.c: 498 info : IE_CALLING type=0(unknown) plan=1(telephony), presentation=0(allowed), screening=3(network provided), number='55555555555' message.c: 510 info : IE_CALLING_NAME name='"55555555555"' message.c: 468 info : IE_CALLED type=0(unknown) plan=1(telephony) number='2342123456' message.c: 492 info : IE_COMPLETE message.c: 516 info : IE_CALLING_INTERFACE name='sip' call.c: 744 info : Received OSMO-CC call from fixed network '55555555555' to mobile '2342123456' call.c: 468 info : Indicate OSMO-CC answer towards fixed network endpoint.c: 931 info : Handle message CC-SETUP-CNF at state INIT-OUT (callref 3) message.c: 498 info : IE_CALLING type=4(subscriber) plan=1(telephony), presentation=0(allowed), screening=3(network provided), number='2342123456' message.c: 582 info : IE_SDP payload=v=0\no=- 3851253277 3851253277 IN IP4 127.0.0.1\ns=session\nc=IN IP4 127.0.0.1\nt=0 0\nm=audio 16384 RTP/AVP 8\na=rtpmap:8 PCMA/8000\n call.c: 751 info : Outgoing call from '55555555555' to '2342123456' amps.c: 932 info : (chan 323) Call to mobile station, paging station id '2342123456' transaction.c: 245 info : Transaction state IDLE -> PAGE transaction.c: 150 info : Created transaction for subscriber '2342123456' endpoint.c: 931 info : Handle message CC-SETUP-COMP-REQ at state CONNECTING-OUT (callref 3) amps.c:1186 info : (chan 323) Paging the phone transaction.c: 245 info : Transaction state PAGE -> PAGE SEND frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) transaction.c: 245 info : Transaction state PAGE SEND -> PAGE REPLY amps.c:1084 notice : (chan 323) Paging timeout, retrying transaction.c: 245 info : Transaction state PAGE REPLY -> PAGE amps.c:1186 info : (chan 323) Paging the phone transaction.c: 245 info : Transaction state PAGE -> PAGE SEND frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) transaction.c: 245 info : Transaction state PAGE SEND -> PAGE REPLY amps.c:1081 notice : (chan 323) Paging timeout, destroying transaction transaction.c: 245 info : Transaction state PAGE REPLY -> CALL RELEASE call.c: 566 info : Call has been released with cause=27 endpoint.c: 931 info : Handle message CC-DISC-REQ at state ACTIVE (callref 3) message.c: 564 info : IE_CAUSE location=10(beyond interworking) isdn_cause=16(normal call clearing) sip_cause=486 socket_cause=0(unset) call.c: 685 info : Received OSMO-CC disconnect from fixed network with cause 16 call.c: 686 info : Call disconnected, releasing! call.c: 495 info : Indicated OSMO-CC release towards fixed network endpoint.c: 931 info : Handle message CC-REL-IND at state DISCONNECTING-OUT (callref 3) message.c: 564 info : IE_CAUSE location=1(private network serving local user) isdn_cause=16(normal call clearing) sip_cause=468 socket_cause=0(unset) frame.c:3693 info : (chan 323) RX Level: 234% Quality: 29% Polarity: POSITIVE amps.c:1068 notice : (chan 323) Release timeout, destroying transaction transaction.c: 163 info : Destroying transaction for subscriber '2342123456'
Is this likely to the sdr, I can use multiple boards for tx/rx but I can't figure out how to expose the different cards in uhd as the list command doesn't seem to work for antenna
Any help appreciated.
Thanks
Dave
-- osmocom-analog mailing list --osmocom-analog@lists.osmocom.org To unsubscribe send an email toosmocom-analog-leave@lists.osmocom.org
It turns out this was a mistake in the asterisk config and its relationship with osmo-cc. It was resolved when I corrected the mistake and works perfectly, sorry for the noise.
On Sun, 30 Jan 2022 at 14:30, Andreas Eversberg andreas@eversberg.eu wrote:
Hi Dave,
Can you try to add "-v 0" to command line? This way you get detailed message frame content in debug output. After the line "transaction.c: 245 info : Transaction state PAGE -> PAGE SEND" you will get several lines with all elements of the paging message. What do they look like for both cases (console and osmo-cc mode)? In my case they look both like this:
frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2732 debug : T1T2: 1 = First Word (FOCC) Next Word (FVC) (Type field) frame.c:2734 debug : DCC: 0 (Digital color code field) frame.c:2732 debug : MIN1: 2109785 = 2123456 (First part of the mobile identification number field) frame.c:2734 debug : P: 3175 (Parity field) frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) frame.c:2732 debug : T1T2: 2 = Next Word (FOCC) First Word (FVC) (Type field) frame.c:2732 debug : SCC: 3 = This word includes message (SAT color code) frame.c:2732 debug : MIN2: 123 = 234 (Second part of the mobile identification number field) frame.c:2732 debug : EF: 0 = No (Extended Protocol Forward Channel Indicator) frame.c:2734 debug : LOCAL/MSG TYPE: 0 (Message Type field) frame.c:2734 debug : ORDQ: 0 (Order qualifier field) frame.c:2734 debug : ORDER: 0 (Order field) frame.c:2742 debug : --> Page Message (Voice Service) frame.c:2734 debug : P: 424 (Parity field) frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2732 debug : T1T2: 1 = First Word (FOCC) Next Word (FVC) (Type field) frame.c:2734 debug : DCC: 0 (Digital color code field) frame.c:2732 debug : MIN1: 2109785 = 2123456 (First part of the mobile identification number field) frame.c:2734 debug : P: 3175 (Parity field) frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) frame.c:2732 debug : T1T2: 2 = Next Word (FOCC) First Word (FVC) (Type field) frame.c:2732 debug : SCC: 3 = This word includes message (SAT color code) frame.c:2732 debug : MIN2: 123 = 234 (Second part of the mobile identification number field) frame.c:2732 debug : EF: 0 = No (Extended Protocol Forward Channel Indicator) frame.c:2734 debug : LOCAL/MSG TYPE: 0 (Message Type field) frame.c:2734 debug : ORDQ: 0 (Order qualifier field) frame.c:2734 debug : ORDER: 0 (Order field) frame.c:2742 debug : --> Page Message (Voice Service) frame.c:2734 debug : P: 424 (Parity field) frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2732 debug : T1T2: 1 = First Word (FOCC) Next Word (FVC) (Type field) frame.c:2734 debug : DCC: 0 (Digital color code field) frame.c:2732 debug : MIN1: 2109785 = 2123456 (First part of the mobile identification number field) frame.c:2734 debug : P: 3175 (Parity field) frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) frame.c:2732 debug : T1T2: 2 = Next Word (FOCC) First Word (FVC) (Type field) frame.c:2732 debug : SCC: 3 = This word includes message (SAT color code) frame.c:2732 debug : MIN2: 123 = 234 (Second part of the mobile identification number field) frame.c:2732 debug : EF: 0 = No (Extended Protocol Forward Channel Indicator) frame.c:2734 debug : LOCAL/MSG TYPE: 0 (Message Type field) frame.c:2734 debug : ORDQ: 0 (Order qualifier field) frame.c:2734 debug : ORDER: 0 (Order field) frame.c:2742 debug : --> Page Message (Voice Service) frame.c:2734 debug : P: 424 (Parity field)
Regards,
Andreas
On 15.01.22 17:45, Dave wrote:
Hi All,
I have an issue where paging doesn't work when using osmo-cc-endpoint with tacs and a USRP1
I can place calls from the MS out over osmo-cc-endpoint via my pbx to the pstn with no problems, if I try to call back in via sip it always fails to page the MS
Running the -x option I can call between two MS stations with no issues, paging works and the calls connect
Here is an example if I run the command I can make calls from the mobile device and hear the music, I can also press d and call the MS back with no problem, paging appears to work 9/10 times
./tacs --sdr-uhd --channel 323 --channel 318 --channel 320 --samplerate 581818 --sdr-tx-antenna TX/RX --sdr-rx-antenna RX2 2342123456
amps.c: 932 info : (chan 323) Call to mobile station, paging station id '2342123456' amps.c:1186 info : (chan 323) Paging the phone frame.c:3693 info : (chan 323) RX Level: 79% Quality: 80% Polarity: POSITIVE amps.c: 832 info : (chan 323) Paging reply 2342123456 (ESN = removed, Class 3 / Continuous / 20 MHz, TIA/EIA-553 or IS-54A mobile station) amps.c:1170 info : (chan 323) Assigning channel to call to mobile station
here is the output with -o and an inbound call via sip
endpoint.c: 931 info : Handle message CC-ATTACH-REQ at state IDLE (callref 2) message.c: 516 info : IE_CALLING_INTERFACE name='sip' message.c: 588 info : IE_SOCKET_ADDRESS address='127.0.0.1:4201' endpoint.c: 390 info : Remote peer with socket address '127.0.0.1' and port '4201' and interface 'sip' attached to us. endpoint.c: 394 info : Changing message to CC-ATTACH-CNF. endpoint.c: 931 info : Handle message CC-ATTACH-RSP at state ATTACH-SENT (callref 1) message.c: 516 info : IE_CALLING_INTERFACE name='tacs' message.c: 588 info : IE_SOCKET_ADDRESS address='127.0.0.1:4200' endpoint.c: 308 info : Attached to remote peer "127.0.0.1:4201". UUUUUendpoint.c: 931 info : Handle message CC-SETUP-REQ at state IDLE (callref 3) message.c: 522 info : IE_CALLING_NETWORK type=4(sip) id='' message.c: 516 info : IE_CALLING_INTERFACE name='sip' message.c: 582 info : IE_SDP payload=v=0\no=root 2465 2465 IN IP4 x.x.x.x \ns=session\nc=IN IP4 x.x.x.x \nt=0 0\nm=audio 20644 RTP/AVP 0 8 101\na=rtpmap:0 PCMU/8000\na=rtpmap:8 PCMA/8000\na=rtpmap:101 telephone-event/8000\na=fmtp:101 0-16\na=silenceSupp:off - - - -\na=ptime:20\na=sendrecv\n message.c: 498 info : IE_CALLING type=0(unknown) plan=1(telephony), presentation=0(allowed), screening=3(network provided), number='55555555555' message.c: 510 info : IE_CALLING_NAME name='"55555555555"' message.c: 468 info : IE_CALLED type=0(unknown) plan=1(telephony) number='2342123456' message.c: 492 info : IE_COMPLETE message.c: 516 info : IE_CALLING_INTERFACE name='sip' call.c: 744 info : Received OSMO-CC call from fixed network '55555555555' to mobile '2342123456' call.c: 468 info : Indicate OSMO-CC answer towards fixed network endpoint.c: 931 info : Handle message CC-SETUP-CNF at state INIT-OUT (callref 3) message.c: 498 info : IE_CALLING type=4(subscriber) plan=1(telephony), presentation=0(allowed), screening=3(network provided), number='2342123456' message.c: 582 info : IE_SDP payload=v=0\no=- 3851253277 3851253277 IN IP4 127.0.0.1\ns=session\nc=IN IP4 127.0.0.1\nt=0 0\nm=audio 16384 RTP/AVP 8\na=rtpmap:8 PCMA/8000\n call.c: 751 info : Outgoing call from '55555555555' to '2342123456' amps.c: 932 info : (chan 323) Call to mobile station, paging station id '2342123456' transaction.c: 245 info : Transaction state IDLE -> PAGE transaction.c: 150 info : Created transaction for subscriber '2342123456' endpoint.c: 931 info : Handle message CC-SETUP-COMP-REQ at state CONNECTING-OUT (callref 3) amps.c:1186 info : (chan 323) Paging the phone transaction.c: 245 info : Transaction state PAGE -> PAGE SEND frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) transaction.c: 245 info : Transaction state PAGE SEND -> PAGE REPLY amps.c:1084 notice : (chan 323) Paging timeout, retrying transaction.c: 245 info : Transaction state PAGE REPLY -> PAGE amps.c:1186 info : (chan 323) Paging the phone transaction.c: 245 info : Transaction state PAGE -> PAGE SEND frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11) transaction.c: 245 info : Transaction state PAGE SEND -> PAGE REPLY amps.c:1081 notice : (chan 323) Paging timeout, destroying transaction transaction.c: 245 info : Transaction state PAGE REPLY -> CALL RELEASE call.c: 566 info : Call has been released with cause=27 endpoint.c: 931 info : Handle message CC-DISC-REQ at state ACTIVE (callref 3) message.c: 564 info : IE_CAUSE location=10(beyond interworking) isdn_cause=16(normal call clearing) sip_cause=486 socket_cause=0(unset) call.c: 685 info : Received OSMO-CC disconnect from fixed network with cause 16 call.c: 686 info : Call disconnected, releasing! call.c: 495 info : Indicated OSMO-CC release towards fixed network endpoint.c: 931 info : Handle message CC-REL-IND at state DISCONNECTING-OUT (callref 3) message.c: 564 info : IE_CAUSE location=1(private network serving local user) isdn_cause=16(normal call clearing) sip_cause=468 socket_cause=0(unset) frame.c:3693 info : (chan 323) RX Level: 234% Quality: 29% Polarity: POSITIVE amps.c:1068 notice : (chan 323) Release timeout, destroying transaction transaction.c: 163 info : Destroying transaction for subscriber '2342123456'
Is this likely to the sdr, I can use multiple boards for tx/rx but I can't figure out how to expose the different cards in uhd as the list command doesn't seem to work for antenna
Any help appreciated.
Thanks
Dave
-- osmocom-analog mailing list -- osmocom-analog@lists.osmocom.org To unsubscribe send an email to osmocom-analog-leave@lists.osmocom.org
-- osmocom-analog mailing list -- osmocom-analog@lists.osmocom.org To unsubscribe send an email to osmocom-analog-leave@lists.osmocom.org
osmocom-analog@lists.osmocom.org