Hi All,
I have an issue where paging doesn't work when using osmo-cc-endpoint with
tacs and a USRP1
I can place calls from the MS out over osmo-cc-endpoint via my pbx to the
pstn with no problems, if I try to call back in via sip it always fails to
page the MS
Running the -x option I can call between two MS stations with no issues,
paging works and the calls connect
Here is an example if I run the command I can make calls from the mobile
device and hear the music, I can also press d and call the MS back with no
problem, paging appears to work 9/10 times
./tacs --sdr-uhd --channel 323 --channel 318 --channel 320 --samplerate
581818 --sdr-tx-antenna TX/RX --sdr-rx-antenna RX2 2342123456
amps.c: 932 info : (chan 323) Call to mobile station, paging station id
'2342123456'
amps.c:1186 info : (chan 323) Paging the phone
frame.c:3693 info : (chan 323) RX Level: 79% Quality: 80% Polarity:
POSITIVE
amps.c: 832 info : (chan 323) Paging reply 2342123456 (ESN = removed,
Class 3 / Continuous / 20 MHz, TIA/EIA-553 or IS-54A mobile station)
amps.c:1170 info : (chan 323) Assigning channel to call to mobile station
here is the output with -o and an inbound call via sip
endpoint.c: 931 info : Handle message CC-ATTACH-REQ at state IDLE
(callref 2)
message.c: 516 info : IE_CALLING_INTERFACE name='sip'
message.c: 588 info : IE_SOCKET_ADDRESS address='127.0.0.1:4201'
endpoint.c: 390 info : Remote peer with socket address '127.0.0.1' and
port '4201' and interface 'sip' attached to us.
endpoint.c: 394 info : Changing message to CC-ATTACH-CNF.
endpoint.c: 931 info : Handle message CC-ATTACH-RSP at state ATTACH-SENT
(callref 1)
message.c: 516 info : IE_CALLING_INTERFACE name='tacs'
message.c: 588 info : IE_SOCKET_ADDRESS address='127.0.0.1:4200'
endpoint.c: 308 info : Attached to remote peer "127.0.0.1:4201".
UUUUUendpoint.c: 931 info : Handle message CC-SETUP-REQ at state IDLE
(callref 3)
message.c: 522 info : IE_CALLING_NETWORK type=4(sip) id=''
message.c: 516 info : IE_CALLING_INTERFACE name='sip'
message.c: 582 info : IE_SDP payload=v=0\no=root 2465 2465 IN IP4
x.x.x.x \ns=session\nc=IN IP4 x.x.x.x \nt=0 0\nm=audio 20644 RTP/AVP 0 8
101\na=rtpmap:0 PCMU/8000\na=rtpmap:8 PCMA/8000\na=rtpmap:101
telephone-event/8000\na=fmtp:101 0-16\na=silenceSupp:off - - -
-\na=ptime:20\na=sendrecv\n
message.c: 498 info : IE_CALLING type=0(unknown) plan=1(telephony),
presentation=0(allowed), screening=3(network provided), number='55555555555'
message.c: 510 info : IE_CALLING_NAME name='"55555555555"'
message.c: 468 info : IE_CALLED type=0(unknown) plan=1(telephony)
number='2342123456'
message.c: 492 info : IE_COMPLETE
message.c: 516 info : IE_CALLING_INTERFACE name='sip'
call.c: 744 info : Received OSMO-CC call from fixed network '55555555555'
to mobile '2342123456'
call.c: 468 info : Indicate OSMO-CC answer towards fixed network
endpoint.c: 931 info : Handle message CC-SETUP-CNF at state INIT-OUT
(callref 3)
message.c: 498 info : IE_CALLING type=4(subscriber) plan=1(telephony),
presentation=0(allowed), screening=3(network provided), number='2342123456'
message.c: 582 info : IE_SDP payload=v=0\no=- 3851253277 3851253277 IN
IP4 127.0.0.1\ns=session\nc=IN IP4 127.0.0.1\nt=0 0\nm=audio 16384 RTP/AVP
8\na=rtpmap:8 PCMA/8000\n
call.c: 751 info : Outgoing call from '55555555555' to '2342123456'
amps.c: 932 info : (chan 323) Call to mobile station, paging station id
'2342123456'
transaction.c: 245 info : Transaction state IDLE -> PAGE
transaction.c: 150 info : Created transaction for subscriber '2342123456'
endpoint.c: 931 info : Handle message CC-SETUP-COMP-REQ at state
CONNECTING-OUT (callref 3)
amps.c:1186 info : (chan 323) Paging the phone
transaction.c: 245 info : Transaction state PAGE -> PAGE SEND
frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word
frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11)
frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word
frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11)
frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word
frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11)
transaction.c: 245 info : Transaction state PAGE SEND -> PAGE REPLY
amps.c:1084 notice : (chan 323) Paging timeout, retrying
transaction.c: 245 info : Transaction state PAGE REPLY -> PAGE
amps.c:1186 info : (chan 323) Paging the phone
transaction.c: 245 info : Transaction state PAGE -> PAGE SEND
frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word
frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11)
frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word
frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11)
frame.c:2721 info : Transmit: Word 1 - Abbreviated Address Word
frame.c:2721 info : Transmit: Word 2 - Extended Address Word (SCC == 11)
transaction.c: 245 info : Transaction state PAGE SEND -> PAGE REPLY
amps.c:1081 notice : (chan 323) Paging timeout, destroying transaction
transaction.c: 245 info : Transaction state PAGE REPLY -> CALL RELEASE
call.c: 566 info : Call has been released with cause=27
endpoint.c: 931 info : Handle message CC-DISC-REQ at state ACTIVE
(callref 3)
message.c: 564 info : IE_CAUSE location=10(beyond interworking)
isdn_cause=16(normal call clearing) sip_cause=486 socket_cause=0(unset)
call.c: 685 info : Received OSMO-CC disconnect from fixed network with
cause 16
call.c: 686 info : Call disconnected, releasing!
call.c: 495 info : Indicated OSMO-CC release towards fixed network
endpoint.c: 931 info : Handle message CC-REL-IND at state
DISCONNECTING-OUT (callref 3)
message.c: 564 info : IE_CAUSE location=1(private network serving local
user) isdn_cause=16(normal call clearing) sip_cause=468
socket_cause=0(unset)
frame.c:3693 info : (chan 323) RX Level: 234% Quality: 29% Polarity:
POSITIVE
amps.c:1068 notice : (chan 323) Release timeout, destroying transaction
transaction.c: 163 info : Destroying transaction for subscriber
'2342123456'
Is this likely to the sdr, I can use multiple boards for tx/rx but I can't
figure out how to expose the different cards in uhd as the list command
doesn't seem to work for antenna
Any help appreciated.
Thanks
Dave
