the load is correct. i get an error pop-up while starting bsc_hack. this is because the
LMT seems not to be 100% compatible with the load. with an older load i don't get this
error pop-up, but it also doesn't work. also no alarms show on the LMT after syncing
database. i will get the exact error message this weekend.
-----Ursprüngliche Nachricht-----
Von: Dieter Spaar [mailto:spaar@mirider.augusta.de]
Gesendet: Mittwoch, 1. April 2009 13:48
An: Andreas.Eversberg
Cc: openbsc(a)lists.gnumonks.org
Betreff: Re: AW: BS-11 runs, but no Network on my Mobile
Hello Andreas,
On Wed, 1 Apr 2009 11:26:18 +0200, "Andreas.Eversberg"
<Andreas.Eversberg(a)versatel.de> wrote:
i tried two different loads, many reboots. also i
reconfigured the
objects (delete / create). many restarts of the bsc_hack always gave the
same results. transmitter is working fine, but no network indication on
my mobile. (manual search).
This is strange. You have LMT, right ? And the correct version of
the firmware is loaded into the BS-11 ? HS010876.SWL for "SW Safety
Load" and HS011106.SWL for the normal software ?
if it helps, i can provide root access to my test
server this weekend.
I most certainly cannot help this way, if bsc_hack sends the configuration
and LMT shows no alerts than the BS-11 should actually work as configured
by bsc_hack.
Best regards,
Dieter
--
Dieter Spaar, Germany spaar(a)mirider.augusta.de