On 15/09/17 09:52, mohammad nejati wrote:
Hi ,
OsmoBTS version 0.6.0.6-ae13
OpenBSC version 0.15.0.885-968a6
I flow the instructions from wiki page and create config files :
https://osmocom.org/projects/cellular-infrastructure/wiki/SDR_OsmoTRX_netwo…
but when i run :
osmo-nitb -c ~/.osmocom/open-bsc.cfg -l ~/.osmocom/hlr.sqlite3 -P -C
--debug=DRLL:DCC:DMM:DRR:DRSL:DNM
I got this error :
There is no such command.
Error occurred during reading the below line:
timer t3103 0
<0005> ../../../src/libbsc/bsc_init.c:536 Failed to parse the config
file: '/home/ashtum/.osmocom/open-bsc.cfg'
Reading config failed. Exiting.
I think there was a change a few weeks ago which prevents configuration
to set any timer to 0. I think you are safe removing that line and
trying again, and as far as I know the program will provide a sane timer
value.
Similarly when i run :
osmo-bts-trx -c ~/.osmocom/osmo-bts.cfg
I got :
((*))
|
/ \ OsmoBTS
There is no such command.
Error occurred during reading the below line:
fn-advance 20
% rtp bind-ip is now deprecated
Failed to parse the config file: '/home/ashtum/.osmocom/osmo-bts.cfg'
According to osmo-bts code:
"osmotrx fn-advance <0-30>"
So I'd say you need something like this:
phy 0
osmotrx fn-advance 20
The config from that wiki page seems old and not matching the current
schema. Please have a look at an up to date config and merge it with the
required bits to work with your hardware:
https://git.osmocom.org/osmo-bts/tree/doc/examples/trx/osmo-bts.cfg
Feel free to update the wiki or provide here a working config once you
are successful.
--
- Pau Espin Pedrol <pespin(a)sysmocom.de>
http://www.sysmocom.de/
=======================================================================
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte