Hello,
One of our BS-11 stations began to behave strangely. I see the following messages
during boot-up:
PHASE: 1 Load SMU Intended Abis-link: Down
PHASE: 2 Load MBCCU MBCCU0: No Load MBCCU1: No Load Abis-link: Down
PHASE: 2 Load MBCCU MBCCU0: Load BTSCAC MBCCU1: No Load Abis-link: Down
PHASE: 2 Load MBCCU MBCCU0: Load BTSCAC MBCCU1: Load BTSCAC Abis-link: Down
PHASE: 2 Load MBCCU MBCCU0: Load BTSCAC MBCCU1: No Load Abis-link: Down
It looks like BS tries to load firmware on MBCCU1 and then gives up.
I tried to delete and re-create trx1 objects using bs11_config, no result.
Tried to reflash BS11, but got software load NACK, and when using —force option
the software download process finishes but the boot-up message is the same as above.
Does it mean that TRX1 is failed and cannot be used no more?
Best Regards,
Sergey.
Show replies by date