Omsobts -osmotrx communication problem
Hi I have installed osmobts and osmotrx with openbsc, to enable openbsc with usrp. But whenever I tried running the three applications, I gave the following error in osmobts. Please help me with it. <000b> trx_if.c:490 Tx burst length 0 invalid
<000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid
BR Snehasish
On Fri, Jan 20, 2017 at 11:58:53AM +0000, Snehasish Kar wrote:
Hi
I have installed osmobts and osmotrx with openbsc, to enable openbsc with usrp. But whenever I tried running the three applications, I gave the following error in osmobts. Please help me with it.
<000b> trx_if.c:490 Tx burst length 0 invalid
<000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid
If I remember correctly, osmo-bts-trx will at startup show a bunch of these and then continue normally. To clarify, you need to run 'osmo-trx', 'osmo-bts-trx' and 'osmo-nitb'. We can't help further with this little information on your config. ~N -- - Neels Hofmeyr <nhofmeyr@sysmocom.de> http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Alt-Moabit 93 * 10559 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Geschäftsführer / Managing Directors: Harald Welte
Hi I have attached my config as requested, also in osmo-trx I am getting the following error "check_rx_md_err: An internal receive buffer has filled" and I am not able to view the network in my phone. I am using usrp x310 and os UBUNTU. BR Snehasish ________________________________ From: Neels Hofmeyr <nhofmeyr@sysmocom.de> Sent: Saturday, January 21, 2017 4:35:06 AM To: Snehasish Kar Cc: openbsc@lists.osmocom.org Subject: Re: Omsobts -osmotrx communication problem On Fri, Jan 20, 2017 at 11:58:53AM +0000, Snehasish Kar wrote:
Hi
I have installed osmobts and osmotrx with openbsc, to enable openbsc with usrp. But whenever I tried running the three applications, I gave the following error in osmobts. Please help me with it.
<000b> trx_if.c:490 Tx burst length 0 invalid
<000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid <000b> trx_if.c:490 Tx burst length 0 invalid
If I remember correctly, osmo-bts-trx will at startup show a bunch of these and then continue normally. To clarify, you need to run 'osmo-trx', 'osmo-bts-trx' and 'osmo-nitb'. We can't help further with this little information on your config. ~N -- - Neels Hofmeyr <nhofmeyr@sysmocom.de> http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Alt-Moabit 93 * 10559 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Geschäftsführer / Managing Directors: Harald Welte
participants (2)
-
Neels Hofmeyr -
Snehasish Kar