4 Oct
2010
4 Oct
'10
10:22 a.m.
Hello all,
I would like to establish an emergency call with OpenBSC for testing
reasons.
I already set "rach emergency call allowed 1" but I get only a busy
line. Is there something else I have to do? I guess the emergency call
procedure is fully implemented in OpenBSC? I found some hints in the
code but I am still not sure.
Thanks,
Andreas
4 Oct
4 Oct
10:33 a.m.
On 10/04/2010 04:22 PM, Andreas Schmidt-Dannert wrote:
Hello all,
I would like to establish an emergency call with OpenBSC for testing reasons.
I already set "rach emergency call allowed 1" but I get only a busy line. Is
there something else I have to do? I guess the emergency call procedure is
fully implemented in OpenBSC? I found some hints in the code but I am still
not sure.
No, this setting comes from the on-waves/bsc-master branch where the emergency
calls are simply forwarded to the MSC and it is only about
indicating that emergency calls are supported.
To implement Emergency Calls in bsc_hack you might need to change the gsm0408
code of OpenBSC to handle the CM Service Request for emergency calls properly
(e.g. check for a valid IMSI as of German regulations), and provide a 'dial
plan' of where 110 should be forwarded to. E.g. it could make sense to have a
small setting to forward 110 to a different mobile subscriber...
If you have any specific implementation question, please feel free to ask.
4954
days inactive
4954
days old
1 comments
2 participants
participants (2)
-
Andreas Schmidt-Dannert -
Holger Hans Peter Freyther