20 Mar
2009
20 Mar
'09
9:18 p.m.
Hello everybody,
I would like to know whether it would be possible to obtain some information
about the cable connection. It is written on the website that the Y03 and
Y04 PCM are left open, but I can see on the photo
http://bs11-abis.gnumonks.org/trac/attachment/wiki/BS11_Configuration/bs11_…
that there is a twinax cable between them.
Am I wrong? If not, I would like to know what's the use of this connection.
Thanks a lot
Eric
23 Mar
23 Mar
7:02 p.m.
On Fri, Mar 20, 2009 at 09:18:34PM +0100, Eric Cathelinaud wrote:
Hello everybody,
I would like to know whether it would be possible to obtain some information
about the cable connection. It is written on the website that the Y03 and
Y04 PCM are left open, but I can see on the photo
http://bs11-abis.gnumonks.org/trac/attachment/wiki/BS11_Configuration/bs11_…
that there is a twinax cable between them.
Am I wrong? If not, I would like to know what's the use of this connection.
you don't need that cable between Y03 and Y04. you probably need it in a
different configuration (loop/multidrop/...) of the E1 interface. but the
config that bs11_config and OpenBSC currently use don't need it.
Thanks a lot
Eric
--
- Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
6048
days inactive
6051
days old
1 comments
2 participants
participants (2)
-
Eric Cathelinaud -
Harald Welte