From: Max &lt;msuraev(a)sysmocom.de&gt; It's useful for debugging and is similar to existing reset command for nsvc. --- src/gb/gprs_bssgp_vty.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/src/gb/gprs_bssgp_vty.c b/src/gb/gprs_bssgp_vty.c index 080867b..a3af69b 100644 --- a/src/gb/gprs_bssgp_vty.c +++ b/src/gb/gprs_bssgp_vty.c @@ -33,6 +33,7 @@ #include <osmocom/core/rate_ctr.h> #include <osmocom/gprs/gprs_ns.h> #include <osmocom/gprs/gprs_bssgp.h> +#include <osmocom/gprs/gprs_bssgp_bss.h> #include <osmocom/vty/vty.h> #include <osmocom/vty/command.h> @@ -113,6 +114,24 @@ static void dump_bssgp(struct vty *vty, int stats) } } +DEFUN(bvc_reset, bvc_reset_cmd, + "bssgp bvc nsei <0-65535> bvci <0-65535> reset", + "Initiate BVC RESET procedure for a given NSEI and BVCI\n") +{ + int r; + uint16_t nsei = atoi(argv[0]), bvci = atoi(argv[1]); + struct bssgp_bvc_ctx *bvc = btsctx_by_bvci_nsei(bvci, nsei); + if (!bvc) { + vty_out(vty, "No BVC for NSEI %d BVCI %d%s", nsei, bvci, + VTY_NEWLINE); + return CMD_WARNING; + } + r = bssgp_tx_bvc_reset(bvc, bvci, BSSGP_CAUSE_OML_INTERV); + vty_out(vty, "Sent BVC RESET for NSEI %d BVCI %d: %d%s", nsei, bvci, r, + VTY_NEWLINE); + return CMD_SUCCESS; +} + #define BSSGP_STR "Show information about the BSSGP protocol\n" DEFUN(show_bssgp, show_bssgp_cmd, "show bssgp", @@ -185,6 +204,7 @@ int bssgp_vty_init(void) install_element_ve(&show_bssgp_stats_cmd); install_element_ve(&show_bvc_cmd); install_element_ve(&logging_fltr_bvc_cmd); + install_element_ve(&bvc_reset_cmd); install_element(CFG_LOG_NODE, &logging_fltr_bvc_cmd); -- 2.5.0