hi,
how did you load hfcmulti driver of mISDN? (check misdn_portinfo for layout)
how did you configure your bts 1? did you configure TS 17/18/19 instead of TS 1/2/3?
andreas
-----Ursprüngliche Nachricht-----
Von: openbsc-bounces(a)lists.osmocom.org [mailto:openbsc-bounces@lists.osmocom.org] Im
Auftrag von Thomas Ansorg
Gesendet: Montag, 14. März 2011 16:55
An: openBSC-Mailingliste
Betreff: BS-11 multidrop not working
hello list,
may someone tell me, why my 2 bs-11 refuse to work as multidrop? i start with this config
file:
!
! OpenBSC configuration saved from vty
! !
password foo
!
line vty
no login
!
network
network country code 262
mobile network code 10
short name Y-Phone
long name Yodaphone
handover 1
handover window rxlev averaging 10
handover window rxqual averaging 1
handover power budget interval 6
handover power budget hysteresis 4
bts 0
type bs11
band GSM900
cell_identity 1
location_area_code 1
training_sequence_code 7
base_station_id_code 63
oml e1 line 0 timeslot 1 sub-slot full
oml e1 tei 25
trx 0
arfcn 121
max_power_red 0
rsl e1 line 0 timeslot 1 sub-slot full
rsl e1 tei 1
timeslot 0
phys_chan_config CCCH+SDCCH4
e1 line 0 timeslot 1 sub-slot full
timeslot 1
phys_chan_config SDCCH8
e1 line 0 timeslot 2 sub-slot 1
timeslot 2
phys_chan_config TCH/F
e1 line 0 timeslot 2 sub-slot 2
timeslot 3
phys_chan_config TCH/F
e1 line 0 timeslot 2 sub-slot 3
timeslot 4
phys_chan_config TCH/F
e1 line 0 timeslot 3 sub-slot 0
timeslot 5
phys_chan_config TCH/F
e1 line 0 timeslot 3 sub-slot 1
timeslot 6
phys_chan_config TCH/F
e1 line 0 timeslot 3 sub-slot 2
timeslot 7
phys_chan_config TCH/F
e1 line 0 timeslot 3 sub-slot 3
bts 1
type bs11
band GSM900
location_area_code 2
training_sequence_code 7
base_station_id_code 63
oml e1 line 1 timeslot 17 sub-slot full
oml e1 tei 25
trx 0
arfcn 1
max_power_red 0
rsl e1 line 1 timeslot 17 sub-slot full
rsl e1 tei 2
timeslot 0
phys_chan_config CCCH+SDCCH4
e1 line 1 timeslot 17 sub-slot full
timeslot 1
phys_chan_config SDCCH8
e1 line 1 timeslot 18 sub-slot 1
timeslot 2
phys_chan_config TCH/F
e1 line 1 timeslot 18 sub-slot 2
timeslot 3
phys_chan_config TCH/F
e1 line 1 timeslot 18 sub-slot 3
timeslot 4
phys_chan_config TCH/F
e1 line 1 timeslot 19 sub-slot 0
timeslot 5
phys_chan_config TCH/F
e1 line 1 timeslot 19 sub-slot 1
timeslot 6
phys_chan_config TCH/F
e1 line 1 timeslot 19 sub-slot 2
timeslot 7
phys_chan_config TCH/F
e1 line 1 timeslot 19 sub-slot 3
each bs-11 works as single without problems. on both is trx0 activated.
bts0 which is connected to pc is in multidrop config, the following bts1 in line config.
but only bts0 is bootstrapped.
where could the problem(s) be?
T.
--
Wer Rechtschreibfehler findet, darf sie behalten!
Show replies by date