On Sun, Nov 14, 2010 at 08:58:51PM +0000, Stuart Baggs wrote:
Hi guys, how do we calibrate the internal ocilator of
the nanoBTS?
Please refer to the nanoBTS product documentation, if you have access to it.
I have a 139 unit which has synced up fine and has a
olid green light but the
network no longer appears on the handsets selection menu (the handset is dual
band and the BTS is on an AFRCN within the handsets range). It was working
before but the unit has been powered down for several months and I remember
someone from ip.access advising that the internal oscillator needs to be
re-calibrated to fix this issue.
The ip.access BTS Installer can do the frequency calibration. I suppose you
have access to that software if you've done business with ip.access before.
We have not implemented this as part of ipaccess-config, as far as I know. It
is not very hard to add, the required OML messages are quite simple.
--
- Harald Welte <laforge(a)gnumonks.org>
http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)