Hello,
Thanks you very much for your help (Love the open-source/hacker community)
I'll try that tomorrow and soon I will return.
Bye!
Le 12/06/2013 00:06, Sergey V. Efimov a écrit :
Hello,
Yep, it seems you need to reflash your BS11. You can start with
"bs11_config -S" to download the safety file into the station if you
have one.
The next step is to download the real working firmware into the
station. It can take up to 1,5 hours depending on the various conditions.
You need to get several files, listed at
http://openbsc.osmocom.org/trac/wiki/bs11_config, try to ask your seller.
At the end of the flashing process (after reboot) you should see
MBCCU0/MBCCU1 No Load / Load messages.
Sergey.
On Jun 12, 2013, at 1:48 AM, choukoumoun wrote:
Hello,
it is the boot-up log for my Bs11
LMT LOGON: ACK
PHASE: 1 load SMU Intended Abis-link: down
PHASE: 1 load SMU Intended Abis-link: down
PHASE: 1 load SMU Intended Abis-link: down
PHASE: 1 load SMU Intended Abis-link: down
PHASE: 1 load SMU Intended Abis-link: down
PHASE: 1 load SMU Intended Abis-link: down
PHASE: 1 load SMU Intended Abis-link: down
PHASE: 1 load SMU Intended Abis-link: down
PHASE: 1 load SMU Intended Abis-link: down
PHASE: 1 load SMU Intended Abis-link: down
PHASE: 1 load SMU Intended Abis-link: down
PHASE: 1 load SMU Intended Abis-link: down
PHASE: 1 load SMU Intended Abis-link: down
PHASE: 1 load SMU Intended Abis-link: down
PHASE: 1 load SMU Intended Abis-link: down
PHASE: 1 load SMU Intended Abis-link: down
PHASE: 1 load SMU Intended Abis-link: down
PHASE: 1 load SMU Intended Abis-link: down
PHASE: 1 load SMU Intended Abis-link: down
PHASE: 1 load SMU Intended Abis-link: down
PHASE: 1 Unknow Abis-link: down
PHASE: 1 Unknow Abis-link: down
PHASE: 1 Unknow Abis-link: down
PHASE: 1 Unknow Abis-link: down
PHASE: 1 Unknow Abis-link: down
PHASE: 1 Unknow Abis-link: down
PHASE: 1 Unknow Abis-link: down
PHASE: 1 Unknow Abis-link: down
PHASE: 1 Unknow Abis-link: down
PHASE: 1 Unknow Abis-link: down
PHASE: 1 Unknow Abis-link: down
PHASE: 1 Unknow Abis-link: down
PHASE: 1 Unknow Abis-link: down
PHASE: 1 Unknow Abis-link: down
PHASE: 1 Unknow Abis-link: down
PHASE: 1 Unknow Abis-link: down
PHASE: 1 Unknow Abis-link: down
PHASE: 1 Unknow Abis-link: down
Iawait yourreplywith great pleasure
best,
Choukoumoun
Le 10/06/2013 11:58, Sergey V. Efimov a écrit :
Hello,
I recall that something similar happened when I tried to monitor freshly received
BS-11 without operating firmware. Could you please provide full boot-up log.
Sergey.
On Jun 10, 2013, at 1:36 AM, choukoumoun wrote:
> Hello list,
>
> I have a problem with BS11 at startup:
>
>
> When I put the BS11 voltage and that I connect in serial and I run:
>
> ./bs11_config-p / dev/ttyUSB0 query
>
> I like the result:
>
>
> PHASE 1: unknown Abis-link: Down
>
> PHASE 1: unknown Abis-link: Down
>
> PHASE 1: unknown Abis-link: Down
>
> PHASE 1: unknown Abis-link: Down
>
> PHASE 1: unknown Abis-link: Down
>
> PHASE 1: unknown Abis-link: Down
>
> PHASE 1: unknown Abis-link: Down
>
>
> constantly and eternally ......
>
> Any idea??
>
>
> thank you
>
>