Is with this configuration possible to send GSM 03.48 messages to a SIM
card as for OTA programming?
On 31/03/2014 23:48, tele wrote:
Hi,
An example configuration for SMPP is the following:
smpp
local-tcp-port 2775
policy closed
esme OSMPP
password YOURPWD
default-route
You do need an external SMSC that binds to OpenBSC using SMPP.
Please note that only SMS that are not for subscribers will go through
the SMPP interface, osmo-nitb check if the extension exists in the HLR
if not the SMS is sent through SMPP.
You can do prefix matching but it will still apply only for numbers not
in the HLR.
We did a dirty workaround in order to force all the SMS through SMPP to
a SMSC based on Kannel.
http://cgit.osmocom.org/openbsc/commit/?h=ciaby/rhizomatica&id=112393a6…
Kannel is configured with a TX/RX bind towards OpenBSC. You may use
only a TRX. If you need help with Kannel config let me know
:tele
On Mon, 31 Mar 2014 18:42:25 +0200
"Jesús Vega Diaz" <wegadj(a)gmail.com> wrote:
Hi all;
I have deployed one ipaccess nanoBTS 1800, with OpenBSC (osmo-nitb)
and all the osmocom suite apps.
I have already make succesfully GSM calls, SMS, and GPRS/EDGE packet
data connections.
I now want support for sending binary SMS, i have read that with SMPP
i would can.
I have compiled OpenBSC with SMPP but now I don´t know how to use it,
i think it is in the OpenBSC vty, but i don´t know the commands or
how to use the interface.
If you can give me some light in this thread i will grant you.
Sorry for my English
Best Regards
Jesús Vega Diaz