Choukoumoun,
The question is related to the osmo-trx more than to UmTRX, so I'm
moving it to the Osmocom mailing list:
On Tue, Jul 15, 2014 at 8:17 PM, choukoumoun <choukoumoun(a)gmail.com> wrote:
Hello guys.
I have a UMTRX my UHD/OPENBTS or UHD/OSMO-TRX same working fine but wen i
start osmo-trx and openbts i have this error
Could you specify where did you get sources and which exact versions
and commit numbers do you use?
Did you try to use osmo-trx with Osmocom software rather than with OpenBTS?
Osmo-trx :
linux; GNU C++ version 4.8.1; Boost_105300; UHD_003.004.000-4fa97a1
Config Settings
Log Level............... NOTICE
Device args............. addr=192.168.10.2
TRX Base Port........... 5700
TRX Address............. 127.0.0.1
Channels................ 1
Samples-per-Symbol...... 4
External Reference...... Disabled
C0 Filler Table......... Disabled
Diversity............... Disabled
Tuning offset........... 0
-- Opening a UmTRX device...
-- Current recv frame size: 1472 bytes
-- Current send frame size: 1472 bytes
-- Setting UmTRX 4 SPS
-- Transceiver active with 1 channel(s)
ALERT 139940970051328 02:13:33.7 UHDDevice.cpp:993:writeSamples: UHD: Device
send timed out
"Constantely" .....
anybody have a idea ?
my usrp probe out :
linux; GNU C++ version 4.8.1; Boost_105300; UHD_003.004.000-4fa97a1
-- Opening a UmTRX device...
-- Current recv frame size: 1472 bytes
-- Current send frame size: 1472 bytes
_____________________________________________________
/
| Device: UmTRX Device
| _____________________________________________________
| /
| | Mboard: UMTRX-REV0
| | hardware: 64000
| | mac-addr: 00:50:c2:85:3f:ff
| | ip-addr: 192.168.10.2
| | gpsdo: none
| | serial: 7
| | name: UmTRX
| | tcxo-dac: 2048
| |
| | Time sources: none, external, _external_, mimo
| | Clock sources: internal, external, mimo
| | Sensors: ref_locked
| | _____________________________________________________
| | /
| | | RX DSP: 0
| | | Freq range: -6.500 to 6.500 Mhz
| | _____________________________________________________
| | /
| | | RX DSP: 1
| | | Freq range: -6.500 to 6.500 Mhz
| | _____________________________________________________
| | /
| | | RX Dboard: A
| | | ID: LMS6002D (0xfa07)
| | | Serial: 7.A
| | | _____________________________________________________
| | | /
| | | | RX Subdev: 0
| | | | Name: LMS6002D (0xfa07) - 0
| | | | Antennas: RX0, RX1, RX2, RX3, CAL
| | | | Sensors: lo_locked
| | | | Freq range: 232.500 to 3720.000 Mhz
| | | | Gain range VGA1: 0.0 to 126.0 step 1.0 dB
| | | | Gain range VGA2: 0.0 to 30.0 step 3.0 dB
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Codec: A
| | | | Name: LMS_RX
| | | | Gain Elements: None
| | _____________________________________________________
| | /
| | | RX Dboard: B
| | | ID: LMS6002D (0xfa07)
| | | Serial: 7.B
| | | _____________________________________________________
| | | /
| | | | RX Subdev: 0
| | | | Name: LMS6002D (0xfa07) - 0
| | | | Antennas: RX0, RX1, RX2, RX3, CAL
| | | | Sensors: lo_locked
| | | | Freq range: 232.500 to 3720.000 Mhz
| | | | Gain range VGA1: 0.0 to 126.0 step 1.0 dB
| | | | Gain range VGA2: 0.0 to 30.0 step 3.0 dB
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Codec: B
| | | | Name: LMS_RX
| | | | Gain Elements: None
| | _____________________________________________________
| | /
| | | TX DSP: 0
| | | Freq range: -6.500 to 6.500 Mhz
| | _____________________________________________________
| | /
| | | TX DSP: 1
| | | Freq range: -6.500 to 6.500 Mhz
| | _____________________________________________________
| | /
| | | TX Dboard: A
| | | ID: LMS6002D (0xfa09)
| | | Serial: 7.A
| | | _____________________________________________________
| | | /
| | | | TX Subdev: 0
| | | | Name: LMS6002D (0xfa09) - 0
| | | | Antennas: TX0, TX1, TX2, CAL
| | | | Sensors: lo_locked
| | | | Freq range: 232.500 to 3720.000 Mhz
| | | | Gain range VGA1: -35.0 to -4.0 step 1.0 dB
| | | | Gain range VGA2: 0.0 to 25.0 step 1.0 dB
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Codec: A
| | | | Name: LMS_TX
| | | | Gain Elements: None
| | _____________________________________________________
| | /
| | | TX Dboard: B
| | | ID: LMS6002D (0xfa09)
| | | Serial: 7.B
| | | _____________________________________________________
| | | /
| | | | TX Subdev: 0
| | | | Name: LMS6002D (0xfa09) - 0
| | | | Antennas: TX0, TX1, TX2, CAL
| | | | Sensors: lo_locked
| | | | Freq range: 232.500 to 3720.000 Mhz
| | | | Gain range VGA1: -35.0 to -4.0 step 1.0 dB
| | | | Gain range VGA2: 0.0 to 25.0 step 1.0 dB
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Codec: B
| | | | Name: LMS_TX
| | | | Gain Elements: None
I make the VCXO configuration procedure with the GPS but no success...
The issue with "UHD: Device send timed out" have nothing to do with
the VCXO calibration. The issue is because of a issue in communication
between the host system and the UmTRX.
What is your hardware setup? Particularly:
- Do you use a switch between the UmTRX and the host system?
- Do you run it on a real hardware or in a VM?
- Is your host system powerful enough?
--
Regards,
Alexander Chemeris.
CEO, Fairwaves, Inc.
https://fairwaves.co