hi
to enable as many as possible of you to help me, heres what bs11_config
said (the old version):
bs11_config (C) 2009-2010 by Harald Welte and Dieter Spaar
This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY
LMT LOGON: ACK
PHASE: 3 Normal MBCCU0: Load MBCCU1: Load
Abis-link: Restoring
BS11 ATTRIBUTES:
BS-11 ESN PCB Serial Number:
BS-11 ESN Hardware Code Number:
BS-11 ESN Firmware Code Number:
PLL Set Value=1006, Work Value=1038
SITE MANAGER ATTRIBUTES:
E1 Channel: Port=0 Timeslot=1 (Full Slot)
TEI: 25
BS11 Line Interface ATTRIBUTES:
PLL Mode: Standalone
BS11 CCLK ATTRIBUTES:
CCLK Accuracy: Medium (0)
BS11 Power Amplifier 0 ATTRIBUTES:
TRX Power: 30mW
LMT LOGOFF: ACK
thats the working one, the non-working says exactly the same, except
pll(1073) and work(1073)
the abis link on the 2nd is also up, but handys dont find it. the
intension ist a multi drop config, but before that, the 2 bs11 should
work on its own, right?
T.
--
Wer Rechtschreibfehler findet, darf sie behalten!
Show replies by date
if this is the output of the last version of bs11_config, then it does not seem to print
the BPORT objects, not even bport0 nor does it show any GET ATTRIBUTE NACK. please do a
clean rebuild of latest git and send output of 'strace -f -x -s1024 bs11_config
query'
--
Sent from a mobile device, excuse my short response