Hi all, A thread on the asterisk mailing list re-triggerd my memory. Last november or so i asked if it might be possible to use a gsm/umts-dongle as a bts. afaicr the general consensus was that it was not possible because the proximity of TX and RX hardware. I have been discussing it with my colleges today and wonder where we were making the obvious thinking-mistake... 1) i know, that certainly at higher powers, the receiver becomes deaf in the vincinity of a (high powered) transmitter, due to cirtuit overload, but in our case we only needs a single miliwatt or even less.... 2) scanning for multiple devices/frequencies is not needed. [the idea is to connect to a single hand-held-device, that is only one meter away, and feed voice through an existing IP-connection] 3) if a dongle is not usable for above reasons as a BTS, why is that same dongle (more-or-less) capable as working as a handheld? Same problems should occur as such, not? http://wiki.e1550.mobi/doku.php If they can tap in the device for audio/sms-client, it should also be possible to do it the other way round, as a single-thread bts.... still puzzled, Hans