From: Álvaro Neira Ayuso <anayuso@sysmocom.de> Add function for requesting the temperature information to the microcontroller. I have added a function that we can extend for requesting more information but in this case we only need to know the temperature. I have added to a microcontroller temperature handling function in the manager for monitoring this information. Signed-off-by: Alvaro Neira Ayuso <anayuso@sysmocom.de> --- v4: Fixed the configure for considering if we are in a sbts2050 or not and compile the code that we will use. configure.ac | 10 ++ src/osmo-bts-sysmo/misc/sysmobts_mgr.c | 56 ++++++++++ src/osmo-bts-sysmo/misc/sysmobts_misc.c | 172 +++++++++++++++++++++++++++++++ src/osmo-bts-sysmo/misc/sysmobts_misc.h | 15 +++ 4 files changed, 253 insertions(+) diff --git a/configure.ac b/configure.ac index 3411017..fa75274 100644 --- a/configure.ac +++ b/configure.ac @@ -51,6 +51,16 @@ AC_CHECK_HEADER([openbsc/gsm_data_shared.h],[], []) CPPFLAGS=$oldCPPFLAGS +# Check for the sbts2050_header.h that was added after the 3.6 release +AC_CHECK_HEADER([sysmocom/femtobts/sbts2050_header.h], + [sysmo_uc_header="yes"],[]) + +if test "$sysmo_uc_header" = "yes" ; then + AC_DEFINE(BUILD_SBTS2050, 1, [Define if we want to build SBTS2050]) +fi +AM_CONDITIONAL(BUILD_SBTS2050, test "x$sysmo_uc_header" = "xyes") +AM_CONFIG_HEADER(btsconfig.h) + AC_OUTPUT( src/Makefile src/common/Makefile diff --git a/src/osmo-bts-sysmo/misc/sysmobts_mgr.c b/src/osmo-bts-sysmo/misc/sysmobts_mgr.c index 171f79b..3a2c10c 100644 --- a/src/osmo-bts-sysmo/misc/sysmobts_mgr.c +++ b/src/osmo-bts-sysmo/misc/sysmobts_mgr.c @@ -35,6 +35,7 @@ #include <osmocom/core/application.h> #include <osmocom/core/timer.h> #include <osmocom/core/msgb.h> +#include <osmocom/core/serial.h> #include <osmocom/vty/telnet_interface.h> #include <osmocom/vty/logging.h> @@ -53,6 +54,58 @@ void *tall_mgr_ctx; /* every 1 hours means 365*24 = 8760 EEprom writes per year (max) */ #define HOURS_TIMER_SECS (1 * 3600) +#ifdef BUILD_SBTS2050 +static struct osmo_timer_list temp_uc_timer; +static void check_uctemp_timer_cb(void *data) +{ + int temp_pa = 0, temp_board = 0; + struct uc *ucontrol0 = data; + + sbts2050_uc_check_temp(ucontrol0, &temp_pa, &temp_board); + + osmo_timer_schedule(&temp_uc_timer, TEMP_TIMER_SECS, 0); +} +#endif + +static void initialize_sbts2050(void) +{ +#ifdef BUILD_SBTS2050 + static struct uc ucontrol0 = { + .id = 0, + .path = "/dev/ttyS0" + }; + int val; + + if (sysmobts_par_get_int(SYSMOBTS_PAR_MODEL_NR, &val) < 0) { + LOGP(DFIND, LOGL_ERROR, + "Failed to get Model number\n"); + return; + } + + if (val == 2050) { + if (sysmobts_par_get_int(SYSMOBTS_PAR_TRX_NR, &val) < 0) { + LOGP(DFIND, LOGL_ERROR, + "Failed to get the TRX number\n"); + return; + } + + if (val != 0) + return; + } + + ucontrol0.fd = osmo_serial_init(ucontrol0.path, 115200); + if (ucontrol0.fd < 0) { + LOGP(DFIND, LOGL_ERROR, + "Failed to open the serial interface\n"); + return; + } + + temp_uc_timer.cb = check_uctemp_timer_cb; + temp_uc_timer.data = &ucontrol0; + check_uctemp_timer_cb(&ucontrol0); +#endif +} + static struct osmo_timer_list temp_timer; static void check_temp_timer_cb(void *unused) { @@ -309,6 +362,9 @@ int main(int argc, char **argv) hours_timer.cb = hours_timer_cb; hours_timer_cb(NULL); + /* start uc temperature check timer */ + initialize_sbts2050(); + /* handle broadcast messages for ipaccess-find */ fd.cb = ipaccess_bcast; rc = osmo_sock_init_ofd(&fd, AF_INET, SOCK_DGRAM, IPPROTO_UDP, diff --git a/src/osmo-bts-sysmo/misc/sysmobts_misc.c b/src/osmo-bts-sysmo/misc/sysmobts_misc.c index c043045..55a7a2a 100644 --- a/src/osmo-bts-sysmo/misc/sysmobts_misc.c +++ b/src/osmo-bts-sysmo/misc/sysmobts_misc.c @@ -32,14 +32,186 @@ #include <osmocom/core/talloc.h> #include <osmocom/core/utils.h> +#include <osmocom/core/msgb.h> #include <osmocom/core/application.h> #include <osmocom/vty/telnet_interface.h> #include <osmocom/vty/logging.h> +#include "btsconfig.h" #include "sysmobts_misc.h" #include "sysmobts_par.h" #include "sysmobts_mgr.h" +#ifdef BUILD_SBTS2050 +#include <sysmocom/femtobts/sbts2050_header.h> +#endif + +#define SERIAL_ALLOC_SIZE 300 +#define SIZE_HEADER_RSP 5 +#define SIZE_HEADER_CMD 4 + + +#ifdef BUILD_SBTS2050 +/********************************************************************** + * Functions read/write from serial interface + *********************************************************************/ +static int hand_serial_read(int fd, struct msgb *msg, int numbytes) +{ + int rc, bread = 0; + + if (numbytes > msgb_tailroom(msg)) + return -ENOSPC; + + while (bread < numbytes) { + rc = read(fd, msg->tail, numbytes - bread); + if (rc < 0) + return -1; + if (rc == 0) + break; + + bread += rc; + msgb_put(msg, rc); + } + + return bread; +} + +static int hand_serial_write(int fd, struct msgb *msg) +{ + int rc, bwritten = 0; + + while (msg->len > 0) { + rc = write(fd, msg->data, msg->len); + if (rc <= 0) + return -1; + + msgb_pull(msg, rc); + bwritten += rc; + } + + return bwritten; +} + +/********************************************************************** + * Functions request information to Microcontroller + *********************************************************************/ +static void add_parity(cmdpkt_t *command) +{ + int n; + uint8_t parity = 0x00; + for (n = 0; n < SIZE_HEADER_CMD+command->u8Len; n++) + parity ^= ((uint8_t *)command)[n]; + + command->cmd.raw[command->u8Len] = parity; +} + +static struct msgb *sbts2050_ucinfo_get(struct uc *ucontrol, struct ucinfo info) +{ + int num, rc; + cmdpkt_t *command; + rsppkt_t *response; + struct msgb *msg; + fd_set fdread; + struct timeval tout = { + .tv_sec = 10, + }; + + switch (info.id) { + case SBTS2050_TEMP_RQT: + num = sizeof(command->cmd.tempGet); + break; + default: + return NULL; + } + num = num + SIZE_HEADER_CMD+1; + + msg = msgb_alloc(SERIAL_ALLOC_SIZE, "Message Microcontroller"); + if (msg == NULL) { + LOGP(DTEMP, LOGL_ERROR, "Error creating msg\n"); + return NULL; + } + command = (cmdpkt_t *) msgb_put(msg, num); + + command->u16Magic = 0xCAFE; + switch (info.id) { + case SBTS2050_TEMP_RQT: + command->u8Id = info.id; + command->u8Len = sizeof(command->cmd.tempGet); + break; + default: + goto err; + } + + add_parity(command); + + if (hand_serial_write(ucontrol->fd, msg) < 0) + goto err; + + msgb_reset(msg); + + FD_ZERO(&fdread); + FD_SET(ucontrol->fd, &fdread); + + num = SIZE_HEADER_RSP; + while (1) { + rc = select(ucontrol->fd+1, &fdread, NULL, NULL, &tout); + if (rc > 0) { + if (hand_serial_read(ucontrol->fd, msg, num) < 0) + goto err; + + response = (rsppkt_t *)msg->data; + + if (response->u8Id != info.id || msg->len <= 0 || + response->i8Error != RQT_SUCCESS) + goto err; + + if (msg->len == SIZE_HEADER_RSP + response->u8Len + 1) + break; + + num = response->u8Len + 1; + } else + goto err; + } + + return msg; + +err: + msgb_free(msg); + return NULL; +} +#endif + +/********************************************************************** + * Uc temperature handling + *********************************************************************/ +void sbts2050_uc_check_temp(struct uc *ucontrol, int *temp_pa, int *temp_board) +{ +#ifdef BUILD_SBTS2050 + rsppkt_t *response; + struct msgb *msg; + struct ucinfo info = { + .id = SBTS2050_TEMP_RQT, + }; + + msg = sbts2050_ucinfo_get(ucontrol, info); + + if (msg == NULL) { + LOGP(DTEMP, LOGL_ERROR, "Error reading temperature\n"); + return; + } + + response = (rsppkt_t *)msg->data; + + *temp_board = response->rsp.tempGet.i8BrdTemp; + *temp_pa = response->rsp.tempGet.i8PaTemp; + + LOGP(DTEMP, LOGL_DEBUG, "Temperature Board: %+3d C\n" + "Tempeture PA: %+3d C\n", + response->rsp.tempGet.i8BrdTemp, + response->rsp.tempGet.i8PaTemp); + msgb_free(msg); +#endif +} /********************************************************************* * Temperature handling diff --git a/src/osmo-bts-sysmo/misc/sysmobts_misc.h b/src/osmo-bts-sysmo/misc/sysmobts_misc.h index 8f7da47..3c6513e 100644 --- a/src/osmo-bts-sysmo/misc/sysmobts_misc.h +++ b/src/osmo-bts-sysmo/misc/sysmobts_misc.h @@ -13,11 +13,26 @@ enum sysmobts_temp_type { _NUM_TEMP_TYPES }; +struct uc { + int id; + int fd; + const char *path; +}; + +struct ucinfo { + uint16_t id; + int master; + int slave; + int pa; +}; + int sysmobts_temp_get(enum sysmobts_temp_sensor sensor, enum sysmobts_temp_type type); void sysmobts_check_temp(int no_eeprom_write); +void sbts2050_uc_check_temp(struct uc *ucontrol, int *temp_pa, int *temp_board); + int sysmobts_update_hours(int no_epprom_write); enum sysmobts_firmware_type {