hi list,
have to sync one of my bs-11. got the hfc-s card and soldered the 2
wires.
is any driver needed for the hfc-s?
or is the clock always on c4io and f0io once the card is plugged in?
the hfcmulti driver loads the e1 card, i have a bmask and a dmask
parameter in modprobe.conf. should i remove them or just hang on the
"type=0x00800"?
i have only one try, so i want to clear all possible problems before
T.
--
Wer Rechtschreibfehler findet, darf sie behalten!
Show replies by date