Sorry, if there are <code tags> then I missed them. ./multi_rx.py -c rtl.cfg.json linux; GNU C++ version 4.8.5; Boost_105400; UHD_003.009.007-0-unknown device: {'gains': 'lna:49', 'args': 'rtl=0', 'ppm': 21, 'rate': 250000, 'frequency': 441287500.0, 'tunable': False, 'offset': 16000, 'name': 'rtl0'} gr-osmosdr v0.1.x-xxx-xunknown (0.1.5git) gnuradio 3.7.12.0 built-in source types: file osmosdr fcd rtl rtl_tcp uhd miri hackrf bladerf rfspace airspy redpitaya Using device #0 Realtek RTL2838UHIDIR SN: 00000001 Found Rafael Micro R820T tuner [R82XX] PLL not locked! Exact sample rate is: 250000.000414 Hz [R82XX] PLL not locked! channel (dev rtl0): {'plot': 'fft', 'name': 'dmr', 'excess_bw': 0.2, 'symbol_rate': 4800, 'destination': 'udp://127.0.0.1:56121', 'demod_type': 'fsk4', 'filter_type': 'rrc', 'frequency': 441287500.0, 'if_rate': 24000} *** Error in `python': malloc: top chunk is corrupt: 0x0000000001924380 *** python --version Python 2.7.13 cat /etc/issue Welcome to openSUSE Leap 42.3 rpm -q gnuradio gnuradio-3.7.12.0-17.1.x86_64 ./rx.py --args 'rtl=0' --gains='LNA:48' -S 250000 -q 21 -f 859462500 -o 16000 -d -100 -O default --nocrypt -v 10 -T IDPS-trunk.tsv -U -V -w 2> /dev/null linux; GNU C++ version 4.8.5; Boost_105400; UHD_003.009.007-0-unknown gain: name: LNA range: start 0 stop 0 step 0 setting gain LNA to 48 supported sample rates 250000-2560000 step 24000 *** Error in `python': free(): invalid pointer: 0x0000000002ef6890 *** ======= Backtrace: ========= /lib64/libc.so.6(+0x740ef)[0x7f71f6cb60ef] /lib64/libc.so.6(+0x79646)[0x7f71f6cbb646] /usr/local/lib64/python2.7/site-packages/op25_repeater/_op25_repeater_swig.so(+0x419f9)[0x7f71e1a499f9] /usr/lib64/libpython2.7.so.1.0(PyObject_Call+0x46)[0x7f71f7287bd6] /usr/lib64/libpython2.7.so.1.0(PyObject_CallFunctionObjArgs+0x15d)[0x7f71f728857d] /usr/local/lib64/python2.7/site-packages/op25_repeater/_op25_repeater_swig.so(+0x16438)[0x7f71e1a1e438] /usr/lib64/libpython2.7.so.1.0(+0xb05e7)[0x7f71f72b45e7] /usr/lib64/libpython2.7.so.1.0(+0xd004f)[0x7f71f72d404f] /usr/lib64/libpython2.7.so.1.0(PyDict_SetItem+0x5a1)[0x7f71f72b6791] /usr/lib64/libpython2.7.so.1.0(_PyObject_GenericSetAttrWithDict+0xab)[0x7f71f72b9eab] /usr/lib64/libpython2.7.so.1.0(PyObject_SetAttr+0x6a)[0x7f71f72ba0ba] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalFrameEx+0xf26)[0x7f71f72f1176] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x244)[0x7f71f72fafa4] /usr/lib64/libpython2.7.so.1.0(+0x9a97e)[0x7f71f729e97e] /usr/lib64/libpython2.7.so.1.0(PyObject_Call+0x46)[0x7f71f7287bd6] /usr/lib64/libpython2.7.so.1.0(+0x8a82e)[0x7f71f728e82e] /usr/lib64/libpython2.7.so.1.0(PyObject_Call+0x46)[0x7f71f7287bd6] /usr/lib64/libpython2.7.so.1.0(+0xd0f55)[0x7f71f72d4f55] /usr/lib64/libpython2.7.so.1.0(+0xccf14)[0x7f71f72d0f14] /usr/lib64/libpython2.7.so.1.0(PyObject_Call+0x46)[0x7f71f7287bd6] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x4fcf)[0x7f71f72f521f] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x51e4)[0x7f71f72f5434] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x51e4)[0x7f71f72f5434] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x51e4)[0x7f71f72f5434] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x244)[0x7f71f72fafa4] /usr/lib64/libpython2.7.so.1.0(+0x9a76f)[0x7f71f729e76f] /usr/lib64/libpython2.7.so.1.0(PyObject_Call+0x46)[0x7f71f7287bd6] /usr/lib64/libpython2.7.so.1.0(+0x8a82e)[0x7f71f728e82e] /usr/lib64/libpython2.7.so.1.0(PyObject_Call+0x46)[0x7f71f7287bd6] /usr/lib64/libpython2.7.so.1.0(+0xd0f55)[0x7f71f72d4f55] /usr/lib64/libpython2.7.so.1.0(+0xccf14)[0x7f71f72d0f14] /usr/lib64/libpython2.7.so.1.0(PyObject_Call+0x46)[0x7f71f7287bd6] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x4fcf)[0x7f71f72f521f] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x244)[0x7f71f72fafa4] /usr/lib64/libpython2.7.so.1.0(+0x9a76f)[0x7f71f729e76f] /usr/lib64/libpython2.7.so.1.0(PyObject_Call+0x46)[0x7f71f7287bd6] /usr/lib64/libpython2.7.so.1.0(+0x8a82e)[0x7f71f728e82e] /usr/lib64/libpython2.7.so.1.0(PyObject_Call+0x46)[0x7f71f7287bd6] /usr/lib64/libpython2.7.so.1.0(+0xd0f55)[0x7f71f72d4f55] /usr/lib64/libpython2.7.so.1.0(+0xccf14)[0x7f71f72d0f14] /usr/lib64/libpython2.7.so.1.0(PyObject_Call+0x46)[0x7f71f7287bd6] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x4fcf)[0x7f71f72f521f] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x244)[0x7f71f72fafa4] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalCode+0x32)[0x7f71f734fc02] /usr/lib64/libpython2.7.so.1.0(+0x151e3b)[0x7f71f7355e3b] /usr/lib64/libpython2.7.so.1.0(PyRun_FileExFlags+0x92)[0x7f71f7271190] /usr/lib64/libpython2.7.so.1.0(PyRun_SimpleFileExFlags+0x304)[0x7f71f7271d5e] /usr/lib64/libpython2.7.so.1.0(Py_Main+0xc4a)[0x7f71f72775d6] /lib64/libc.so.6(__libc_start_main+0xf5)[0x7f71f6c62725] python(_start+0x29)[0x400789] ======= Memory map: ======== 00400000-00401000 r-xp 00000000 00:26 1817429 /usr/bin/python2.7 00600000-00601000 r--p 00000000 00:26 1817429 /usr/bin/python2.7 00601000-00602000 rw-p 00001000 00:26 1817429 /usr/bin/python2.7 02081000-02f1b000 rw-p 00000000 00:00 0 [heap] 7f71dc226000-7f71dc6d4000 rw-p 00000000 00:00 0 7f71dc6d4000-7f71dc6d5000 ---p 00000000 00:00 0 7f71dc6d5000-7f71dced5000 rw-p 00000000 00:00 0 7f71dced5000-7f71dced6000 r--p 00000000 00:26 1891017 /usr/lib64/libicudata.so.52.1 7f71dced6000-7f71dd0d5000 ---p 00001000 00:26 1891017 /usr/lib64/libicudata.so.52.1 7f71dd0d5000-7f71dd0d6000 r--p 00000000 00:26 1891017 /usr/lib64/libicudata.so.52.1 7f71dd0d6000-7f71dd0f8000 r-xp 00000000 00:26 2077022 /usr/lib64/libbluetooth.so.3.18.13 7f71dd0f8000-7f71dd2f7000 ---p 00022000 00:26 2077022 /usr/lib64/libbluetooth.so.3.18.13 7f71dd2f7000-7f71dd2f8000 r--p 00021000 00:26 2077022 /usr/lib64/libbluetooth.so.3.18.13 7f71dd2f8000-7f71dd2fb000 rw-p 00022000 00:26 2077022 /usr/lib64/libbluetooth.so.3.18.13 7f71dd2fb000-7f71dd501000 r-xp 00000000 00:26 1891019 /usr/lib64/libicui18n.so.52.1 7f71dd501000-7f71dd700000 ---p 00206000 00:26 1891019 /usr/lib64/libicui18n.so.52.1 7f71dd700000-7f71dd70c000 r--p 00205000 00:26 1891019 /usr/lib64/libicui18n.so.52.1 7f71dd70c000-7f71dd70e000 rw-p 00211000 00:26 1891019 /usr/lib64/libicui18n.so.52.1 7f71dd70e000-7f71dd70f000 rw-p 00000000 00:00 0 7f71dd70f000-7f71dd879000 r-xp 00000000 00:26 1891031 /usr/lib64/libicuuc.so.52.1 7f71dd879000-7f71dda79000 ---p 0016a000 00:26 1891031 /usr/lib64/libicuuc.so.52.1 7f71dda79000-7f71dda89000 r--p 0016a000 00:26 1891031 /usr/lib64/libicuuc.so.52.1 7f71dda89000-7f71dda8a000 rw-p 0017a000 00:26 1891031 /usr/lib64/libicuuc.so.52.1 7f71dda8a000-7f71dda8e000 rw-p 00000000 00:00 0 7f71dda8e000-7f71ddaab000 r-xp 00000000 00:26 1801092 /usr/lib64/libgps.so.22.0.0 7f71ddaab000-7f71ddcaa000 ---p 0001d000 00:26 1801092 /usr/lib64/libgps.so.22.0.0 7f71ddcaa000-7f71ddcab000 r--p 0001c000 00:26 1801092 /usr/lib64/libgps.so.22.0.0 7f71ddcab000-7f71ddcac000 rw-p 0001d000 00:26 1801092 /usr/lib64/libgps.so.22.0.0 7f71ddcac000-7f71ddcaf000 rw-p 00000000 00:00 0 7f71ddcaf000-7f71ddd18000 r-xp 00000000 00:26 1801134 /usr/lib64/libboost_serialization.so.1.54.0 7f71ddd18000-7f71ddf17000 ---p 00069000 00:26 1801134 /usr/lib64/libboost_serialization.so.1.54.0 7f71ddf17000-7f71ddf1b000 r--p 00068000 00:26 1801134 /usr/lib64/libboost_serialization.so.1.54.0 7f71ddf1b000-7f71ddf1c000 rw-p 0006c000 00:26 1801134 /usr/lib64/libboost_serialization.so.1.54.0 7f71ddf1c000-7f71de025000 r-xp 00000000 00:26 1903097 /usr/lib64/libboost_regex.so.1.54.0 7f71de025000-7f71de225000 ---p 00109000 00:26 1903097 /usr/lib64/libboost_regex.so.1.54.0 7f71de225000-7f71de22a000 r--p 00109000 00:26 1903097 /usr/lib64/libboost_regex.so.1.54.0 7f71de22a000-7f71de22c000 rw-p 0010e000 00:26 1903097 /usr/lib64/libboost_regex.so.1.54.0 7f71de22c000-7f71de22d000 rw-p 00000000 00:00 0 7f71de22d000-7f71de23d000 r-xp 00000000 00:26 1801158 /usr/lib64/libboost_date_time.so.1.54.0 7f71de23d000-7f71de43d000 ---p 00010000 00:26 1801158 /usr/lib64/libboost_date_time.so.1.54.0 7f71de43d000-7f71de43e000 r--p 00010000 00:26 1801158 /usr/lib64/libboost_date_time.so.1.54.0 7f71de43e000-7f71de43f000 rw-p 00011000 00:26 1801158 /usr/lib64/libboost_date_time.so.1.54.0 7f71de43f000-7f71de443000 r-xp 00000000 00:26 2571618 /usr/lib64/libosmodsp.so.0.0.0 7f71de443000-7f71de642000 ---p 00004000 00:26 2571618 /usr/lib64/libosmodsp.so.0.0.0 7f71de642000-7f71de643000 r--p 00003000 00:26 2571618 /usr/lib64/libosmodsp.so.0.0.0 7f71de643000-7f71de644000 rw-p 00004000 00:26 2571618 /usr/lib64/libosmodsp.so.0.0.0 7f71de644000-7f71de64a000 r-xp 00000000 00:26 2428675 /usr/lib64/libairspy.so.1.0.9 7f71de64a000-7f71de84a000 ---p 00006000 00:26 2428675 /usr/lib64/libairspy.so.1.0.9 7f71de84a000-7f71de84b000 r--p 00006000 00:26 2428675 /usr/lib64/libairspy.so.1.0.9 7f71de84b000-7f71de84c000 rw-p 00007000 00:26 2428675 /usr/lib64/libairspy.so.1.0.9 7f71de84c000-7f71de882000 r-xp 00000000 00:26 2078650 /usr/lib64/libbladeRF.so.1 7f71de882000-7f71dea81000 ---p 00036000 00:26 2078650 /usr/lib64/libbladeRF.so.1 7f71dea81000-7f71dea82000 r--p 00035000 00:26 2078650 /usr/lib64/libbladeRF.so.1 7f71dea82000-7f71dea83000 rw-p 00036000 00:26 2078650 /usr/lib64/libbladeRF.so.1 7f71dea83000-7f71dea88000 r-xp 00000000 00:26 2084160 /usr/lib64/libhackrf.so.0.5.0 7f71dea88000-7f71dec88000 ---p 00005000 00:26 2084160 /usr/lib64/libhackrf.so.0.5.0 7f71dec88000-7f71dec89000 r--p 00005000 00:26 2084160 /usr/lib64/libhackrf.so.0.5.0 7f71dec89000-7f71dec8a000 rw-p 00006000 00:26 2084160 /usr/lib64/libhackrf.so.0.5.0 7f71dec8a000-7f71dec91000 r-xp 00000000 00:26 2610773 /usr/lib64/libmirisdr.so.0.0git 7f71dec91000-7f71dee90000 ---p 00007000 00:26 2610773 /usr/lib64/libmirisdr.so.0.0git 7f71dee90000-7f71dee91000 r--p 00006000 00:26 2610773 /usr/lib64/libmirisdr.so.0.0git 7f71dee91000-7f71dee92000 rw-p 00007000 00:26 2610773 /usr/lib64/libmirisdr.so.0.0git 7f71dee92000-7f71df4c1000 r-xp 00000000 00:26 2385921 /usr/lib64/libuhd.so.003.009 7f71df4c1000-7f71df6c1000 ---p 0062f000 00:26 2385921 /usr/lib64/libuhd.so.003.009 7f71df6c1000-7f71df6ea000 r--p 0062f000 00:26 2385921 /usr/lib64/libuhd.so.003.009 7f71df6ea000-7f71df6ec000 rw-p 00658000 00:26 2385921 /usr/lib64/libuhd.so.003.009 7f71df6ec000-7f71df6f0000 rw-p 00000000 00:00 0 7f71df6f0000-7f71df738000 r-xp 00000000 00:26 2625968 /usr/lib64/libgnuradio-uhd-3.7.12.0.so.0.0.0 7f71df738000-7f71df938000 ---p 00048000 00:26 2625968 /usr/lib64/libgnuradio-uhd-3.7.12.0.so.0.0.0 7f71df938000-7f71df93e000 r--p 00048000 00:26 2625968 /usr/lib64/libgnuradio-uhd-3.7.12.0.so.0.0.0 7f71df93e000-7f71df93f000 rw-p 0004e000 00:26 2625968 /usr/lib64/libgnuradio-uhd-3.7.12.0.so.0.0.0 7f71df93f000-7f71df94d000 r-xp 00000000 00:26 2428693 /usr/lib64/librtlsdr.so.0.5git 7f71df94d000-7f71dfb4c000 ---p 0000e000 00:26 2428693 /usr/lib64/librtlsdr.so.0.5git 7f71dfb4c000-7f71dfb4d000 r--p 0000d000 00:26 2428693 /usr/lib64/librtlsdr.so.0.5git 7f71dfb4d000-7f71dfb4e000 rw-p 0000e000 00:26 2428693 /usr/lib64/librtlsdr.so.0.5git 7f71dfb4e000-7f71dfb5c000 r-xp 00000000 00:26 2625987 /usr/lib64/libgnuradio-fcdproplus.so.0.0.0 7f71dfb5c000-7f71dfd5c000 ---p 0000e000 00:26 2625987 /usr/lib64/libgnuradio-fcdproplus.so.0.0.0 7f71dfd5c000-7f71dfd5d000 r--p 0000e000 00:26 2625987 /usr/lib64/libgnuradio-fcdproplus.so.0.0.0 7f71dfd5d000-7f71dfd5e000 rw-p 0000f000 00:26 2625987 /usr/lib64/libgnuradio-fcdproplus.so.0.0.0 7f71dfd5e000-7f71dfd6e000 r-xp 00000000 00:26 2625948 /usr/lib64/libgnuradio-fcd-3.7.12.0.so.0.0.0 7f71dfd6e000-7f71dff6e000 ---p 00010000 00:26 2625948 /usr/lib64/libgnuradio-fcd-3.7.12.0.so.0.0.0 7f71dff6e000-7f71dff6f000 r--p 00010000 00:26 2625948 /usr/lib64/libgnuradio-fcd-3.7.12.0.so.0.0.0 7f71dff6f000-7f71dff71000 rw-p 00011000 00:26 2625948 /usr/lib64/libgnuradio-fcd-3.7.12.0.so.0.0.0 7f71dff71000-7f71dff75000 r-xp 00000000 00:26 2084170 /usr/lib64/libosmosdr.so.0.0.0 7f71dff75000-7f71e0174000 ---p 00004000 00:26 2084170 /usr/lib64/libosmosdr.so.0.0.0 7f71e0174000-7f71e0175000 r--p 00003000 00:26 2084170 /usr/lib64/libosmosdr.so.0.0.0 7f71e0175000-7f71e0176000 rw-p 00004000 00:26 2084170 /usr/lib64/libosmosdr.so.0.0.0 7f71e0176000-7f71e0180000 r-xp 00000000 00:26 2625978 /usr/lib64/libgnuradio-iqbalance.so 7f71e0180000-7f71e0380000 ---p 0000a000 00:26 2625978 /usr/lib64/libgnuradio-iqbalance.so 7f71e0380000-7f71e0381000 r--p 0000a000 00:26 2625978 /usr/lib64/libgnuradio-iqbalance.so 7f71e0381000-7f71e0382000 rw-p 0000b000 00:26 2625978 /usr/lib64/libgnuradio-iqbalance.so 7f71e0382000-7f71e0446000 r-xp 00000000 00:26 2627684 /usr/lib64/libgnuradio-osmosdr-0.1.5git.so.0.0.0 7f71e0446000-7f71e0645000 ---p 000c4000 00:26 2627684 /usr/lib64/libgnuradio-osmosdr-0.1.5git.so.0.0.0 7f71e0645000-7f71e064e000 r--p 000c3000 00:26 2627684 /usr/lib64/libgnuradio-osmosdr-0.1.5git.so.0.0.0 7f71e064e000-7f71e064f000 rw-p 000cc000 00:26 2627684 /usr/lib64/libgnuradio-osmosdr-0.1.5git.so.0.0.0 7f71e064f000-7f71e0700000 r-xp 00000000 00:26 2628892 /usr/lib64/python2.7/site-packages/osmosdr/_osmosdr_swig.so 7f71e0700000-7f71e08ff000 ---p 000b1000 00:26 2628892 /usr/lib64/python2.7/site-packages/osmosdr/_osmosdr_swig.so 7f71e08ff000-7f71e0902000 r--p 000b0000 00:26 2628892 /usr/lib64/python2.7/site-packages/osmosdr/_osmosdr_swig.so 7f71e0902000-7f71e0908000 rw-p 000b3000 00:26 2628892 /usr/lib64/python2.7/site-packages/osmosdr/_osmosdr_swig.so 7f71e0908000-7f71e0989000 rw-p 00000000 00:00 0 7f71e0989000-7f71e09b4000 r-xp 00000000 00:26 2398187 /lib64/libtinfo.so.5.9 7f71e09b4000-7f71e0bb3000 ---p 0002b000 00:26 2398187 /lib64/libtinfo.so.5.9 7f71e0bb3000-7f71e0bb7000 r--p 0002a000 00:26 2398187 /lib64/libtinfo.so.5.9 7f71e0bb7000-7f71e0bbc000 rw-p 0002e000 00:26 2398187 /lib64/libtinfo.so.5.9 7f71e0bbc000-7f71e0bbd000 rw-p 00000000 00:00 0 7f71e0bbd000-7f71e0bf5000 r-xp 00000000 00:26 2398185 /lib64/libncursesw.so.5.9 7f71e0bf5000-7f71e0df4000 ---p 00038000 00:26 2398185 /lib64/libncursesw.so.5.9 7f71e0df4000-7f71e0df5000 r--p 00037000 00:26 2398185 /lib64/libncursesw.so.5.9 7f71e0df5000-7f71e0df6000 rw-p 00038000 00:26 2398185 /lib64/libncursesw.so.5.9 7f71e0df6000-7f71e0e07000 r-xp 00000000 00:26 1840401 /usr/lib64/python2.7/lib-dynload/_curses.so 7f71e0e07000-7f71e1007000 ---p 00011000 00:26 1840401 /usr/lib64/python2.7/lib-dynload/_curses.so 7f71e1007000-7f71e1008000 r--p 00011000 00:26 1840401 /usr/lib64/python2.7/lib-dynload/_curses.so 7f71e1008000-7f71e100a000 rw-p 00012000 00:26 1840401 /usr/lib64/python2.7/lib-dynload/_curses.so 7f71e100a000-7f71e100f000 r-xp 00000000 00:26 1818074 /usr/lib64/python2.7/lib-dynload/select.so 7f71e100f000-7f71e120e000 ---p 00005000 00:26 1818074 /usr/lib64/python2.7/lib-dynload/select.so 7f71e120e000-7f71e120f000 r--p 00004000 00:26 1818074 /usr/lib64/python2.7/lib-dynload/select.so 7f71e120f000-7f71e1211000 rw-p 00005000 00:26 1818074 /usr/lib64/python2.7/lib-dynload/select.so 7f71e1211000-7f71e1251000 rw-p 00000000 00:00 0 7f71e1251000-7f71e1271000 r-xp 00000000 00:26 2386127 /usr/lib64/libgnuradio-fft-3.7.11.so.0.0.0 7f71e1271000-7f71e1471000 ---p 00020000 00:26 2386127 /usr/lib64/libgnuradio-fft-3.7.11.so.0.0.0 7f71e1471000-7f71e1474000 r--p 00020000 00:26 2386127 /usr/lib64/libgnuradio-fft-3.7.11.so.0.0.0 7f71e1474000-7f71e1475000 rw-p 00023000 00:26 2386127 /usr/lib64/libgnuradio-fft-3.7.11.so.0.0.0 7f71e1475000-7f71e1544000 r-xp 00000000 00:26 2386129 /usr/lib64/libgnuradio-filter-3.7.11.so.0.0.0 7f71e1544000-7f71e1743000 ---p 000cf000 00:26 2386129 /usr/lib64/libgnuradio-filter-3.7.11.so.0.0.0 7f71e1743000-7f71e1757000 r--p 000ce000 00:26 2386129 /usr/lib64/libgnuradio-filter-3.7.11.so.0.0.0 7f71e1757000-7f71e1759000 rw-p 000e2000 00:26 2386129 /usr/lib64/libgnuradio-filter-3.7.11.so.0.0.0 7f71e1759000-7f71e1803000 r-xp 00000000 00:3c 2275 /usr/local/lib64/libgnuradio-op25_repeater.so 7f71e1803000-7f71e1a02000 ---p 000aa000 00:3c 2275 /usr/local/lib64/libgnuradio-op25_repeater.so 7f71e1a02000-7f71e1a07000 r--p 000a9000 00:3c 2275 /usr/local/lib64/libgnuradio-op25_repeater.so 7f71e1a07000-7f71e1a08000 rw-p 000ae000 00:3c 2275 /usr/local/lib64/libgnuradio-op25_repeater.so 7f71e1a08000-7f71e1abb000 r-xp 00000000 00:3c 2373 /usr/local/lib64/python2.7/site-packages/op25_repeater/_op25_repeater_swig.so 7f71e1abb000-7f71e1cba000 ---p 000b3000 00:3c 2373 /usr/local/lib64/python2.7/site-packages/op25_repeater/_op25_repeater_swig.so 7f71e1cba000-7f71e1cbc000 r--p 000b2000 00:3c 2373 /usr/local/lib64/python2.7/site-packages/op25_repeater/_op25_repeater_swig.so 7f71e1cbc000-7f71e1cc4000 rw-p 000b4000 00:3c 2373 /usr/local/lib64/python2.7/site-packages/op25_repeater/_op25_repeater_swig.so 7f71e1cc4000-7f71e1d45000 rw-p 00000000 00:00 0 7f71e1d7a000-7f71e1ed2000 r-xp 00000000 00:26 2385918 /usr/lib64/libvolk.so.1.3 7f71e1ed2000-7f71e20d2000 ---p 00158000 00:26 2385918 /usr/lib64/libvolk.so.1.3 7f71e20d2000-7f71e20d3000 r--p 00158000 00:26 2385918 /usr/lib64/libvolk.so.1.3 7f71e20d3000-7f71e2154000 rw-p 00159000 00:26 2385918 /usr/lib64/libvolk.so.1.3 7f71e2154000-7f71e2155000 rw-p 00000000 00:00 0 7f71e2155000-7f71e219a000 r-xp 00000000 00:26 2386135 /usr/lib64/libgnuradio-pmt-3.7.11.so.0.0.0 7f71e219a000-7f71e2399000 ---p 00045000 00:26 2386135 /usr/lib64/libgnuradio-pmt-3.7.11.so.0.0.0 7f71e2399000-7f71e239d000 r--p 00044000 00:26 2386135 /usr/lib64/libgnuradio-pmt-3.7.11.so.0.0.0 7f71e239d000-7f71e239e000 rw-p 00048000 00:26 2386135 /usr/lib64/libgnuradio-pmt-3.7.11.so.0.0.0 7f71e239e000-7f71e23e4000 r-xp 00000000 00:26 1798159 /lib64/libdbus-1.so.3.8.14 7f71e23e4000-7f71e25e3000 ---p 00046000 00:26 1798159 /lib64/libdbus-1.so.3.8.14 7f71e25e3000-7f71e25e4000 r--p 00045000 00:26 1798159 /lib64/libdbus-1.so.3.8.14 7f71e25e4000-7f71e25e5000 rw-p 00046000 00:26 1798159 /lib64/libdbus-1.so.3.8.14 7f71e25e5000-7f71e2601000 r-xp 00000000 00:26 1797761 /usr/lib64/libnl-3.so.200.18.0 7f71e2601000-7f71e2800000 ---p 0001c000 00:26 1797761 /usr/lib64/libnl-3.so.200.18.0 7f71e2800000-7f71e2802000 r--p 0001b000 00:26 1797761 /usr/lib64/libnl-3.so.200.18.0 7f71e2802000-7f71e2803000 rw-p 0001d000 00:26 1797761 /usr/lib64/libnl-3.so.200.18.0 7f71e2803000-7f71e2808000 r-xp 00000000 00:26 1797765 /usr/lib64/libnl-genl-3.so.200.18.0 7f71e2808000-7f71e2a08000 ---p 00005000 00:26 1797765 /usr/lib64/libnl-genl-3.so.200.18.0 7f71e2a08000-7f71e2a09000 r--p 00005000 00:26 1797765 /usr/lib64/libnl-genl-3.so.200.18.0 7f71e2a09000-7f71e2a0a000 rw-p 00006000 00:26 1797765 /usr/lib64/libnl-genl-3.so.200.18.0 7f71e2a0a000-7f71e2a39000 r-xp 00000000 00:26 2556691 /usr/lib64/libgomp.so.1.0.0 7f71e2a39000-7f71e2c38000 ---p 0002f000 00:26 2556691 /usr/lib64/libgomp.so.1.0.0 7f71e2c38000-7f71e2c39000 r--p 0002e000 00:26 2556691 /usr/lib64/libgomp.so.1.0.0 7f71e2c39000-7f71e2c3a000 rw-p 0002f000 00:26 2556691 /usr/lib64/libgomp.so.1.0.0 7f71e2c3a000-7f71e2e26000 r-xp 00000000 00:26 1868384 /usr/lib64/libfftw3.so.3.5.5 7f71e2e26000-7f71e3025000 ---p 001ec000 00:26 1868384 /usr/lib64/libfftw3.so.3.5.5 7f71e3025000-7f71e3036000 r--p 001eb000 00:26 1868384 /usr/lib64/libfftw3.so.3.5.5 7f71e3036000-7f71e3037000 rw-p 001fc000 00:26 1868384 /usr/lib64/libfftw3.so.3.5.5 7f71e3037000-7f71e30ff000 r-xp 00000000 00:26 2386139 /usr/lib64/libgnuradio-runtime-3.7.11.so.0.0.0 7f71e30ff000-7f71e32fe000 ---p 000c8000 00:26 2386139 /usr/lib64/libgnuradio-runtime-3.7.11.so.0.0.0 7f71e32fe000-7f71e3304000 r--p 000c7000 00:26 2386139 /usr/lib64/libgnuradio-runtime-3.7.11.so.0.0.0 7f71e3304000-7f71e3306000 rw-p 000cd000 00:26 2386139 /usr/lib64/libgnuradio-runtime-3.7.11.so.0.0.0 7f71e3306000-7f71e3307000 rw-p 00000000 00:00 0 7f71e3307000-7f71e334a000 r-xp 00000000 00:26 1799954 /usr/lib64/libpcap.so.1.8.1 7f71e334a000-7f71e3549000 ---p 00043000 00:26 1799954 /usr/lib64/libpcap.so.1.8.1 7f71e3549000-7f71e354b000 r--p 00042000 00:26 1799954 /usr/lib64/libpcap.so.1.8.1Aborted (core dumped) git show --oneline -s 4c7184c (HEAD -> master, origin/master, origin/HEAD) Fixed bug with loss of tgid_map during hunting/tsys_reset This one works fine for rx.py before multirx.py came along: git show --oneline -s 7192172 (HEAD -> master, origin/master, origin/HEAD) Formatting changes for consistency Any ideas to fix this? TIA, Mike
I was seeing this sort of error last summer and I am almost certain it was related to a bug/incompatibility in the rtl-sdr/gr-osmosdr/gnuradio stack. I had to go back to an earlier version to get a working system. A month or so ago I went back to building from the latests stable gnuradio using the "build-gnuradio" script and everything now seems to work OK, so whatever was going on apparently was fixed. So, you might want to try either upgrading or downgrading your system to see if that solves it for you. 73, John ---- On 04/08/2018 07:37 PM, kc9lwk@sbcglobal.net [op25-dev] wrote:
Sorry, if there are <code tags> then I missed them.
./multi_rx.py -c rtl.cfg.json
linux; GNU C++ version 4.8.5; Boost_105400; UHD_003.009.007-0-unknown
device: {'gains': 'lna:49', 'args': 'rtl=0', 'ppm': 21, 'rate': 250000, 'frequency': 441287500.0, 'tunable': False, 'offset': 16000, 'name': 'rtl0'} gr-osmosdr v0.1.x-xxx-xunknown (0.1.5git) gnuradio 3.7.12.0 built-in source types: file osmosdr fcd rtl rtl_tcp uhd miri hackrf bladerf rfspace airspy redpitaya Using device #0 Realtek RTL2838UHIDIR SN: 00000001 Found Rafael Micro R820T tuner [R82XX] PLL not locked! Exact sample rate is: 250000.000414 Hz [R82XX] PLL not locked! channel (dev rtl0): {'plot': 'fft', 'name': 'dmr', 'excess_bw': 0.2, 'symbol_rate': 4800, 'destination': 'udp://127.0.0.1:56121', 'demod_type': 'fsk4', 'filter_type': 'rrc', 'frequency': 441287500.0, 'if_rate': 24000} *** Error in `python': malloc: top chunk is corrupt: 0x0000000001924380 ***
python --version Python 2.7.13
cat /etc/issue Welcome to openSUSE Leap 42.3
rpm -q gnuradio gnuradio-3.7.12.0-17.1.x86_64
./rx.py --args 'rtl=0' --gains='LNA:48' -S 250000 -q 21 -f 859462500 -o 16000 -d -100 -O default --nocrypt -v 10 -T IDPS-trunk.tsv -U -V -w 2> /dev/null
linux; GNU C++ version 4.8.5; Boost_105400; UHD_003.009.007-0-unknown
gain: name: LNA range: start 0 stop 0 step 0 setting gain LNA to 48 supported sample rates 250000-2560000 step 24000 *** Error in `python': free(): invalid pointer: 0x0000000002ef6890 *** ======= Backtrace: ========= /lib64/libc.so.6(+0x740ef)[0x7f71f6c b60ef] /lib64/libc.so.6(+0x79646)[0x7f71f6cbb646] /usr/local/lib64/python2.7/site-packages/op25_repeater/_op25_repeater_swig.so(+0x419f9)[0x7f71e1a499f9] /usr/lib64/libpython2.7.so.1.0(PyObject_Call+0x46)[0x7f71f7287bd6] /usr/lib64/libpython2.7.so.1.0(PyObject_CallFunctionObjArgs+0x15d)[0x7f71f728857d] /usr/local/lib64/python2.7/site-packages/op25_repeater/_op25_repeater_swig.so(+0x16438)[0x7f71e1a1e438] /usr/lib64/libpython2.7.so.1.0(+0xb05e7)[0x7f71f72b45e7] /usr/lib64/libpython2.7.so.1.0(+0xd004f)[0x7f71f72d404f] /usr/lib64/libpython2.7.so.1.0(PyDict_SetItem+0x5a1)[0x7f71f72b6791] /usr/lib64/libpython2.7.so.1.0(_PyObject_GenericSetAttrWithDict+0xab)[0x7f71f72b9eab] /usr/lib64/libpython2.7.so.1.0(PyObject_SetAttr+0x6a)[0x7f71f72ba0ba] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalFrameEx+0xf26)[0x7f71f72f1176] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x244)[0x7f71f72fafa4] /usr/lib64/libpyth on2.7.so.1.0(+0x9a97e)[0x7f71f729e97e] /usr/lib64/libpython2.7.so.1.0(PyObject_Call+0x46)[0x7f71f7287bd6] /usr/lib64/libpython2.7.so.1.0(+0x8a82e)[0x7f71f728e82e] /usr/lib64/libpython2.7.so.1.0(PyObject_Call+0x46)[0x7f71f7287bd6] /usr/lib64/libpython2.7.so.1.0(+0xd0f55)[0x7f71f72d4f55] /usr/lib64/libpython2.7.so.1.0(+0xccf14)[0x7f71f72d0f14] /usr/lib64/libpython2.7.so.1.0(PyObject_Call+0x46)[0x7f71f7287bd6] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x4fcf)[0x7f71f72f521f] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x51e4)[0x7f71f72f5434] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x51e4)[0x7f71f72f5434] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x51e4)[0x7f71f72f5434] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x244)[0x7f71f72fafa4] /usr/lib64/libpython2.7.so.1.0(+0x9a76f)[0x7f71f729e76f] /usr/lib64/libpython2.7.so.1.0(PyObject_Call+0x46)[0x7f71f7287bd6] /usr/lib64/libpython2.7.so.1.0(+0x8a82e)[0x7f71f728e82e] /usr/lib64/libpython2.7.so.1.0(PyObject_Call+0x46)[0x7f71f7287bd6] /usr/lib64/libpython2.7.so.1.0(+0xd0f55)[0x7f71f72d4f55] /usr/lib64/libpython2.7.so.1.0(+0xccf14)[0x7f71f72d0f14] /usr/lib64/libpython2.7.so.1.0(PyObject_Call+0x46)[0x7f71f7287bd6] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x4fcf)[0x7f71f72f521f] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x244)[0x7f71f72fafa4] /usr/lib64/libpython2.7.so.1.0(+0x9a76f)[0x7f71f729e76f] /usr/lib64/libpython2.7.so.1.0(PyObject_Call+0x46)[0x7f71f7287bd6] /usr/lib64/libpython2.7.so.1.0(+0x8a82e)[0x7f71f728e82e] /usr/lib64/libpython2.7.so.1.0(PyObject_Call+0x46)[0x7f71f7287bd6] /usr/lib64/libpython2.7.so.1.0(+0xd0f55)[0x7f71f72d4f55] /usr/lib64/libpython2.7.so.1.0(+0xccf14)[0x7f71f72d0f14] /usr/lib64/libpython2.7.so.1.0(PyObject_Call+0x46)[0x7f71f7287bd6] /usr/lib64/libp ython2.7.so.1.0(PyEval_EvalFrameEx+0x4fcf)[0x7f71f72f521f] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x244)[0x7f71f72fafa4] /usr/lib64/libpython2.7.so.1.0(PyEval_EvalCode+0x32)[0x7f71f734fc02] /usr/lib64/libpython2.7.so.1.0(+0x151e3b)[0x7f71f7355e3b] /usr/lib64/libpython2.7.so.1.0(PyRun_FileExFlags+0x92)[0x7f71f7271190] /usr/lib64/libpython2.7.so.1.0(PyRun_SimpleFileExFlags+0x304)[0x7f71f7271d5e] /usr/lib64/libpython2.7.so.1.0(Py_Main+0xc4a)[0x7f71f72775d6] /lib64/libc.so.6(__libc_start_main+0xf5)[0x7f71f6c62725] python(_start+0x29)[0x400789] ======= Memory map: ======== 00400000-00401000 r-xp 00000000 00:26 1817429 /usr/bin/python2.7 00600000-00601000 r--p 00000000 00:26 1817429 ; /usr/bin/python2.7 00601000-00602000 rw-p 00001000 00:26 1817429 /usr/bin/python2.7 02081000-02f1b000 rw-p 00000000 00:00 0 [heap] 7f71dc226000-7f71dc6d4000 rw-p 00000000 00:00 0 7f71dc6d4000-7f71dc6d5000 ---p 00000000 00:00 0 7f71dc6d5000-7f71dced5000 rw-p 00000000 00:00 0 7f71dced5000-7f71dced6000 r--p 00000000 00:26 1891017 /usr/lib64/libicudata.so.52.1 7f71dced6000-7f71dd0d5000 ---p 00001000 00:26 18 91017 /usr/lib64/libicudata.so.52.1 7f71dd0d5000-7f71dd0d6000 r--p 00000000 00:26 1891017 /usr/lib64/libicudata.so.52.1 7f71dd0d6000-7f71dd0f8000 r-xp 00000000 00:26 2077022 /usr/lib64/libbluetooth.so.3.18.13 7f71dd0f8000-7f71dd2f7000 ---p 00022000 00:26 2077022 /usr/lib64/libbluetooth.so.3.18.13 7f71dd2f7000-7f71dd2f8000 r--p 00021000 00:26 2077022 /usr/lib64/libbluetooth.so.3.18.13 7f71dd2f8000-7f71dd2fb000 rw-p 00022000 00:26 2077022 /usr/lib64/libbluetooth.so.3.18.13 7f71dd2fb000-7f71dd501000 r-xp 00000000 00:26 1891019 /usr/lib64/libicui18n.so.52.1 7f71dd501000-7f71dd700000 ---p 00206000 00:26 1891019 /usr/lib64/libicui18n.so.52.1 7f71dd700000-7f71dd70c000 r--p 00205000 00:26 1891019 /usr/lib64/libicui18n.so.52.1 7f71dd70c000-7f71dd70e000 rw-p 00211000 00:26 1891019 /usr/lib64/libicui18n.so.52.1 7f71dd70e000 -7f71dd70f000 rw-p 00000000 00:00 0 7f71dd70f000-7f71dd879000 r-xp 00000000 00:26 1891031 /usr/lib64/libicuuc.so.52.1 7f71dd879000-7f71dda79000 ---p 0016a000 00:26 1891031 /usr/lib64/libicuuc.so.52.1 7f71dda79000-7f71dda89000 r--p 0016a000 00:26 1891031 /usr/lib64/libicuuc.so.52.1 7f71dda89000-7f71dda8a000 rw-p 0017a000 00:26 1891031 /usr/lib64/libicuuc.so.52.1 7f71dda8a000-7f71dda8e000 rw-p 00000000 00:00 0 7f71dda8e000-7f71ddaab000 r-xp 00000000 00:26 1801092 &n bsp; /usr/lib64/libgps.so.22.0.0 7f71ddaab000-7f71ddcaa000 ---p 0001d000 00:26 1801092 /usr/lib64/libgps.so.22.0.0 7f71ddcaa000-7f71ddcab000 r--p 0001c000 00:26 1801092 /usr/lib64/libgps.so.22.0.0 7f71ddcab000-7f71ddcac000 rw-p 0001d000 00:26 1801092 /usr/lib64/libgps.so.22.0.0 7f71ddcac000-7f71ddcaf000 rw-p 00000000 00:00 0 7f71ddcaf000-7f71ddd18000 r-xp 00000000 00:26 1801134 /usr/lib64/libboost_serialization.so.1.54.0 7f71ddd18000-7f71ddf17000 ---p 00069000 00: 26 1801134 /usr/lib64/libboost_serialization.so.1.54.0 7f71ddf17000-7f71ddf1b000 r--p 00068000 00:26 1801134 /usr/lib64/libboost_serialization.so.1.54.0 7f71ddf1b000-7f71ddf1c000 rw-p 0006c000 00:26 1801134 /usr/lib64/libboost_serialization.so.1.54.0 7f71ddf1c000-7f71de025000 r-xp 00000000 00:26 1903097 /usr/lib64/libboost_regex.so.1.54.0 7f71de025000-7f71de225000 ---p 00109000 00:26 1903097 /usr/lib64/libboost_ regex.so.1.54.0 7f71de225000-7f71de22a000 r--p 00109000 00:26 1903097 /usr/lib64/libboost_regex.so.1.54.0 7f71de22a000-7f71de22c000 rw-p 0010e000 00:26 1903097 /usr/lib64/libboost_regex.so.1.54.0 7f71de22c000-7f71de22d000 rw-p 00000000 00:00 0 7f71de22d000-7f71de23d000 r-xp 00000000 00:26 1801158 /usr/lib64/libboost_date_time.so.1.54.0 7f71de23d000-7f71de43d000 ---p 00010000 00:26 1801158 /usr/lib64/libboost_date_time.so.1.54.0 7f71de43d000-7f71de43e000 r--p 00010000 00:26 1801158 & nbsp; /usr/lib64/libboost_date_time.so.1.54.0 7f71de43e000-7f71de43f000 rw-p 00011000 00:26 1801158 /usr/lib64/libboost_date_time.so.1.54.0 7f71de43f000-7f71de443000 r-xp 00000000 00:26 2571618 /usr/lib64/libosmodsp.so.0.0.0 7f71de443000-7f71de642000 ---p 00004000 00:26 2571618 /usr/lib64/libosmodsp.so.0.0.0 7f71de642000-7f71de643000 r--p 00003000 00:26 2571618 /usr/lib64/libosmodsp.so.0.0.0 7f71de643000-7f71de644000 rw-p 00004000 00:26 2571618 /usr/lib64/libosmodsp.so.0.0.0 7f71de644000-7f71de64a000 r-xp 00000000 00:26 2428675 /usr/lib64/libairspy.so.1.0.9 7f71de64a000-7f71de84a000 ---p 00006000 00:26 2428675 /usr/lib64/libairspy.so.1.0.9 7f71de84a000-7f71de84b000 r--p 00006000 00:26 2428675 /usr/lib64/libairspy.so.1.0.9 7f71de84b000-7f71de84c000 rw-p 00007000 00:26 2428675 /usr/lib64/libairspy.so.1.0.9 7f71de84c000-7f71de882000 r-xp 00000000 00:26 2078 650 /usr/lib64/libbladeRF.so.1 7f71de882000-7f71dea81000 ---p 00036000 00:26 2078650 /usr/lib64/libbladeRF.so.1 7f71dea81000-7f71dea82000 r--p 00035000 00:26 2078650 /usr/lib64/libbladeRF.so.1 7f71dea82000-7f71dea83000 rw-p 00036000 00:26 2078650 /usr/lib64/libbladeRF.so.1 7f71dea83000-7f71dea88000 r-xp 00000000 00:26 2084160 /usr/lib64/libhackrf.so.0.5.0 7f71dea88000-7f71dec88000 ---p 00005000 00:26 2084160& nbsp; /usr/lib64/libhackrf.so.0.5.0 7f71dec88000-7f71dec89000 r--p 00005000 00:26 2084160 /usr/lib64/libhackrf.so.0.5.0 7f71dec89000-7f71dec8a000 rw-p 00006000 00:26 2084160 /usr/lib64/libhackrf.so.0.5.0 7f71dec8a000-7f71dec91000 r-xp 00000000 00:26 2610773 /usr/lib64/libmirisdr.so.0.0git 7f71dec91000-7f71dee90000 ---p 00007000 00:26 2610773 /usr/lib64/libmirisdr.so.0.0git 7f71dee90000-7f71dee91000 r--p 00006000 00 :26 2610773 /usr/lib64/libmirisdr.so.0.0git 7f71dee91000-7f71dee92000 rw-p 00007000 00:26 2610773 /usr/lib64/libmirisdr.so.0.0git 7f71dee92000-7f71df4c1000 r-xp 00000000 00:26 2385921 /usr/lib64/libuhd.so.003.009 7f71df4c1000-7f71df6c1000 ---p 0062f000 00:26 2385921 /usr/lib64/libuhd.so.003.009 7f71df6c1000-7f71df6ea000 r--p 0062f000 00:26 2385921 /usr/lib64/libuhd.so.003.009 7f71df6ea000-7f71df6ec000 rw-p 00 658000 00:26 2385921 /usr/lib64/libuhd.so.003.009 7f71df6ec000-7f71df6f0000 rw-p 00000000 00:00 0 7f71df6f0000-7f71df738000 r-xp 00000000 00:26 2625968 /usr/lib64/libgnuradio-uhd-3.7.12.0.so.0.0.0 7f71df738000-7f71df938000 ---p 00048000 00:26 2625968 /usr/lib64/libgnuradio-uhd-3.7.12.0.so.0.0.0 7f71df938000-7f71df93e000 r--p 00048000 00:26 2625968 /usr/lib64/libgnuradio-uhd-3.7.12.0.so.0.0.0 7f71df93e000-7f71df93f000 rw-p 0004e000 00:26 2625968 ; /usr/lib64/libgnuradio-uhd-3.7.12.0.so.0.0.0 7f71df93f000-7f71df94d000 r-xp 00000000 00:26 2428693 /usr/lib64/librtlsdr.so.0.5git 7f71df94d000-7f71dfb4c000 ---p 0000e000 00:26 2428693 /usr/lib64/librtlsdr.so.0.5git 7f71dfb4c000-7f71dfb4d000 r--p 0000d000 00:26 2428693 /usr/lib64/librtlsdr.so.0.5git 7f71dfb4d000-7f71dfb4e000 rw-p 0000e000 00:26 2428693 /usr/lib64/librtlsdr.so.0.5git 7f71dfb4e000-7f71dfb5c000 r-xp 00000000 00:26 2625987 &n bsp; /usr/lib64/libgnuradio-fcdproplus.so.0.0.0 7f71dfb5c000-7f71dfd5c000 ---p 0000e000 00:26 2625987 /usr/lib64/libgnuradio-fcdproplus.so.0.0.0 7f71dfd5c000-7f71dfd5d000 r--p 0000e000 00:26 2625987 /usr/lib64/libgnuradio-fcdproplus.so.0.0.0 7f71dfd5d000-7f71dfd5e000 rw-p 0000f000 00:26 2625987 /usr/lib64/libgnuradio-fcdproplus.so.0.0.0 7f71dfd5e000-7f71dfd6e000 r-xp 00000000 00:26 2625948 /usr/lib64/libgnuradio-fcd-3.7.12.0.so.0.0.0 7f71dfd6e000-7f71dff6e000 -- -p 00010000 00:26 2625948 /usr/lib64/libgnuradio-fcd-3.7.12.0.so.0.0.0 7f71dff6e000-7f71dff6f000 r--p 00010000 00:26 2625948 /usr/lib64/libgnuradio-fcd-3.7.12.0.so.0.0.0 7f71dff6f000-7f71dff71000 rw-p 00011000 00:26 2625948 /usr/lib64/libgnuradio-fcd-3.7.12.0.so.0.0.0 7f71dff71000-7f71dff75000 r-xp 00000000 00:26 2084170 /usr/lib64/libosmosdr.so.0.0.0 7f71dff75000-7f71e0174000 ---p 00004000 00:26 2084170 /usr/li b64/libosmosdr.so.0.0.0 7f71e0174000-7f71e0175000 r--p 00003000 00:26 2084170 /usr/lib64/libosmosdr.so.0.0.0 7f71e0175000-7f71e0176000 rw-p 00004000 00:26 2084170 /usr/lib64/libosmosdr.so.0.0.0 7f71e0176000-7f71e0180000 r-xp 00000000 00:26 2625978 /usr/lib64/libgnuradio-iqbalance.so 7f71e0180000-7f71e0380000 ---p 0000a000 00:26 2625978 /usr/lib64/libgnuradio-iqbalance.so 7f71e0380000-7f71e0381000 r--p 0000a000 00:26 2625978 &nb sp; /usr/lib64/libgnuradio-iqbalance.so 7f71e0381000-7f71e0382000 rw-p 0000b000 00:26 2625978 /usr/lib64/libgnuradio-iqbalance.so 7f71e0382000-7f71e0446000 r-xp 00000000 00:26 2627684 /usr/lib64/libgnuradio-osmosdr-0.1.5git.so.0.0.0 7f71e0446000-7f71e0645000 ---p 000c4000 00:26 2627684 /usr/lib64/libgnuradio-osmosdr-0.1.5git.so.0.0.0 7f71e0645000-7f71e064e000 r--p 000c3000 00:26 2627684 /usr/lib64/libgnuradio-osmosdr-0.1.5git.so.0.0.0 7f71e064e000-7f71e064f000 rw-p 000cc000 00:26 2627684 &nbs p; /usr/lib64/libgnuradio-osmosdr-0.1.5git.so.0.0.0 7f71e064f000-7f71e0700000 r-xp 00000000 00:26 2628892 /usr/lib64/python2.7/site-packages/osmosdr/_osmosdr_swig.so 7f71e0700000-7f71e08ff000 ---p 000b1000 00:26 2628892 /usr/lib64/python2.7/site-packages/osmosdr/_osmosdr_swig.so 7f71e08ff000-7f71e0902000 r--p 000b0000 00:26 2628892 /usr/lib64/python2.7/site-packages/osmosdr/_osmosdr_swig.so 7f71e0902000-7f71e0908000 rw-p 000b3000 00:26 2628892 &nbs p; /usr/lib64/python2.7/site-packages/osmosdr/_osmosdr_swig.so 7f71e0908000-7f71e0989000 rw-p 00000000 00:00 0 7f71e0989000-7f71e09b4000 r-xp 00000000 00:26 2398187 /lib64/libtinfo.so.5.9 7f71e09b4000-7f71e0bb3000 ---p 0002b000 00:26 2398187 /lib64/libtinfo.so.5.9 7f71e0bb3000-7f71e0bb7000 r--p 0002a000 00:26 2398187 /lib64/libtinfo.so.5.9 7f71e0bb7000-7f71e0bbc000 rw-p 0002e000 00:26 2398187 /lib64/libtinfo.so.5.9 7f71e0bbc000-7f71e0bbd000 rw-p 00000000 00:00 0 7f71e0bbd000-7f71e0bf5000 r-xp 00000000 00:26 2398185 /lib64/libncursesw.so.5.9 7f71e0bf5000-7f71e0df4000 ---p 00038000 00:26 2398185 /lib64/libncursesw.so.5.9 7f71e0df4000-7f71e0df5000 r--p 00037000 00:26 2398185 /lib64/libncursesw.so.5.9 7f71e0df5000-7f71e0df6000 rw-p 00038000 00:26 2398185 /lib64/libncursesw.so.5.9 7f71e0df6000-7f71e0e07000 r-xp 00000000 00:26 1840401 /usr/lib64/python2.7/lib-dynload/_curses.so 7f71e0e07000-7f71e1007000 ---p 00011000 00:26 1840401 /usr/lib64/python2.7/lib-dynload/_curses.so 7f71e1007000-7f71e1008000 r--p 00011000 00:26 1840401 /usr/lib64/python2.7/lib-dynload/_curses.so 7f71e1008000-7f71e100a000 rw-p 00012000 00:26 1840401 /usr/lib64/python2.7/lib-dynload/_curses.so 7f71e100a000-7f71e100f000 r-xp 00000000 00:26 1818074 /usr/lib64/python2.7/lib-dynload/select.so 7f71e100f000-7f71e120e000 ---p 00005000 00:26 1818074 /usr/lib6 4/python2.7/lib-dynload/select.so 7f71e120e000-7f71e120f000 r--p 00004000 00:26 1818074 /usr/lib64/python2.7/lib-dynload/select.so 7f71e120f000-7f71e1211000 rw-p 00005000 00:26 1818074 /usr/lib64/python2.7/lib-dynload/select.so 7f71e1211000-7f71e1251000 rw-p 00000000 00:00 0 7f71e1251000-7f71e1271000 r-xp 00000000 00:26 2386127 /usr/lib64/libgnuradio-fft-3.7.11.so.0.0.0 7f71e1271000-7f71e1471000 ---p 00020000 00:26 2386127 /usr/lib64/libgnuradio-fft-3.7.11.so.0.0.0 7f71e1471000-7f71e1474000 r--p 00020000 00:26 238612 7 /usr/lib64/libgnuradio-fft-3.7.11.so.0.0.0 7f71e1474000-7f71e1475000 rw-p 00023000 00:26 2386127 /usr/lib64/libgnuradio-fft-3.7.11.so.0.0.0 7f71e1475000-7f71e1544000 r-xp 00000000 00:26 2386129 /usr/lib64/libgnuradio-filter-3.7.11.so.0.0.0 7f71e1544000-7f71e1743000 ---p 000cf000 00:26 2386129 /usr/lib64/libgnuradio-filter-3.7.11.so.0.0.0 7f71e1743000-7f71e1757000 r--p 000ce000 00:26 2386129 /usr/lib64/libgnura dio-filter-3.7.11.so.0.0.0 7f71e1757000-7f71e1759000 rw-p 000e2000 00:26 2386129 /usr/lib64/libgnuradio-filter-3.7.11.so.0.0.0 7f71e1759000-7f71e1803000 r-xp 00000000 00:3c 2275 /usr/local/lib64/libgnuradio-op25_repeater.so 7f71e1803000-7f71e1a02000 ---p 000aa000 00:3c 2275 /usr/local/lib64/libgnuradio-op25_repeater.so 7f71e1a02000-7f71e1a07000 r--p 000a9000 00:3c 2275 /usr/local/lib64/libgnuradio-op25_repeater.so 7f71e1a07000-7f71e1a08000 rw-p 000ae000 00:3c 2275&nbs p; /usr/local/lib64/libgnuradio-op25_repeater.so 7f71e1a08000-7f71e1abb000 r-xp 00000000 00:3c 2373 /usr/local/lib64/python2.7/site-packages/op25_repeater/_op25_repeater_swig.so 7f71e1abb000-7f71e1cba000 ---p 000b3000 00:3c 2373 /usr/local/lib64/python2.7/site-packages/op25_repeater/_op25_repeater_swig.so 7f71e1cba000-7f71e1cbc000 r--p 000b2000 00:3c 2373 /usr/local/lib64/python2.7/site-packages/op25_repeater/_op25_repeater_swig.so 7f71e1cbc000-7f71e1cc4000 r w-p 000b4000 00:3c 2373 /usr/local/lib64/python2.7/site-packages/op25_repeater/_op25_repeater_swig.so 7f71e1cc4000-7f71e1d45000 rw-p 00000000 00:00 0 7f71e1d7a000-7f71e1ed2000 r-xp 00000000 00:26 2385918 /usr/lib64/libvolk.so.1.3 7f71e1ed2000-7f71e20d2000 ---p 00158000 00:26 2385918 /usr/lib64/libvolk.so.1.3 7f71e20d2000-7f71e20d3000 r--p 00158000 00:26 2385918 /usr/lib64/libvolk.so.1.3 7f71e20d3000-7f71e2154000 rw-p 00159000 00:26 2385918 &nbs p; /usr/lib64/libvolk.so.1.3 7f71e2154000-7f71e2155000 rw-p 00000000 00:00 0 7f71e2155000-7f71e219a000 r-xp 00000000 00:26 2386135 /usr/lib64/libgnuradio-pmt-3.7.11.so.0.0.0 7f71e219a000-7f71e2399000 ---p 00045000 00:26 2386135 /usr/lib64/libgnuradio-pmt-3.7.11.so.0.0.0 7f71e2399000-7f71e239d000 r--p 00044000 00:26 2386135 /usr/lib64/libgnuradio-pmt-3.7.11.so.0.0.0 7f71e239d000-7f71e239e000 rw-p 00048000 00:26 2386135 /usr/lib64/libgnuradio-pmt-3.7.11.so.0.0.0 7f71e239e 000-7f71e23e4000 r-xp 00000000 00:26 1798159 /lib64/libdbus-1.so.3.8.14 7f71e23e4000-7f71e25e3000 ---p 00046000 00:26 1798159 /lib64/libdbus-1.so.3.8.14 7f71e25e3000-7f71e25e4000 r--p 00045000 00:26 1798159 /lib64/libdbus-1.so.3.8.14 7f71e25e4000-7f71e25e5000 rw-p 00046000 00:26 1798159 /lib64/libdbus-1.so.3.8.14 7f71e25e5000-7f71e2601000 r-xp 00000000 00:26 1797761 /usr/lib64/libnl-3.so.200.18.0 7f71e2601000 -7f71e2800000 ---p 0001c000 00:26 1797761 /usr/lib64/libnl-3.so.200.18.0 7f71e2800000-7f71e2802000 r--p 0001b000 00:26 1797761 /usr/lib64/libnl-3.so.200.18.0 7f71e2802000-7f71e2803000 rw-p 0001d000 00:26 1797761 /usr/lib64/libnl-3.so.200.18.0 7f71e2803000-7f71e2808000 r-xp 00000000 00:26 1797765 /usr/lib64/libnl-genl-3.so.200.18.0 7f71e2808000-7f71e2a08000 ---p 00005000 00:26 1797765 /usr/lib64/libnl-genl-3.so.2 00.18.0 7f71e2a08000-7f71e2a09000 r--p 00005000 00:26 1797765 /usr/lib64/libnl-genl-3.so.200.18.0 7f71e2a09000-7f71e2a0a000 rw-p 00006000 00:26 1797765 /usr/lib64/libnl-genl-3.so.200.18.0 7f71e2a0a000-7f71e2a39000 r-xp 00000000 00:26 2556691 /usr/lib64/libgomp.so.1.0.0 7f71e2a39000-7f71e2c38000 ---p 0002f000 00:26 2556691 /usr/lib64/libgomp.so.1.0.0 7f71e2c38000-7f71e2c39000 r--p 0002e000 00:26 2556691 /usr/l ib64/libgomp.so.1.0.0 7f71e2c39000-7f71e2c3a000 rw-p 0002f000 00:26 2556691 /usr/lib64/libgomp.so.1.0.0 7f71e2c3a000-7f71e2e26000 r-xp 00000000 00:26 1868384 /usr/lib64/libfftw3.so.3.5.5 7f71e2e26000-7f71e3025000 ---p 001ec000 00:26 1868384 /usr/lib64/libfftw3.so.3.5.5 7f71e3025000-7f71e3036000 r--p 001eb000 00:26 1868384 /usr/lib64/libfftw3.so.3.5.5 7f71e3036000-7f71e3037000 rw-p 001fc000 00:26 1868384 /usr/ lib64/libfftw3.so.3.5.5 7f71e3037000-7f71e30ff000 r-xp 00000000 00:26 2386139 /usr/lib64/libgnuradio-runtime-3.7.11.so.0.0.0 7f71e30ff000-7f71e32fe000 ---p 000c8000 00:26 2386139 /usr/lib64/libgnuradio-runtime-3.7.11.so.0.0.0 7f71e32fe000-7f71e3304000 r--p 000c7000 00:26 2386139 /usr/lib64/libgnuradio-runtime-3.7.11.so.0.0.0 7f71e3304000-7f71e3306000 rw-p 000cd000 00:26 2386139 /usr/lib64/libgnuradio-runtime-3.7.11.so.0.0.0 7f71e3306000-7f71e3307000 rw-p 00000000 00:00 0 7f71e3307000-7f71e334a000 r-xp 00000000 00:26 1799954 /usr/lib64/libpcap.so.1.8.1 7f71e334a000-7f71e3549000 ---p 00043000 00:26 1799954 /usr/lib64/libpcap.so.1.8.1 7f71e3549000-7f71e354b000 r--p 00042000 00:26 1799954 /usr/lib64/libpcap.so.1.8.1Aborted (core dumped)
git show --oneline -s
4c7184c (HEAD -> master, origin/master, origin/HEAD) Fixed bug with loss of tgid_map during hunting/tsys_reset
This one works fine for rx.py before multirx.py came along:
git show --oneline -s
7192172 (HEAD -> master, origin/master, origin/HEAD) Formatting changes for consistency
Any ideas to fix this?
TIA,
Mike
Thanks, John, you got me thinking... op25 installs its libs in /usr/local/lib even on my 64-bit system. I had moved them to /usr/local/lib64 and ldconfig'ed so when I uninstalled the old system the old libs were still there. rx.py works fine again. No joy with multirx.py on DMR yet. Thanks for jumpstarting my brain. If no luck with multirx.py I'll start a new thread with the new particulars. 73, Mike
Can you install both versions of op25, ie. max branch and osmocom op25 version on the same installationof ubuntu and it work?
Dick, I have op25 running on two separate Ubuntu 16.04 Virtual Machines in Oracle VirtualBox. One of the VM’s has the MAX branch while the other has Graham’s [Boadbod] version. I believe you are using virtualization and can accomplish this much easier than trying to install both on the same machine and having to keep the two versions from conflicting with each other. I’ve not installed the Osmocom version in a long time because of the numerous code and feature improvements by Max, Graham, and a few other contributors. Bill From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] Sent: Wednesday, April 11, 2018 3:08 PM To: op25-dev@yahoogroups.com Subject: Re: [op25-dev] Some help with Error in `python' please Can you install both versions of op25, ie. max branch and osmocom op25 version on the same installation of ubuntu and it work?
You can have both versions reside on the same machine (virtual or real) but only one can be "installed" in /usr/local at a time. I accomplish this by cloning the various repos into separate directories then sym-linking the one I want to use to "~/op25" prior to running a 'make install'. e.g. git clone https://git.osmocom.org/op25 https://git.osmocom.org/op25 op25.max git clone https://github.com/boatbod/op25 https://github.com/boatbod/op25 op25.boat ln -s ~/op25.max ~/op25 cd ~/op25/build cmake ../ make sudo make install cd ~ rm op25 ln -s op25.boat op25 cd ~/op25/build cmake ../ make sudo make install As an aside, it's very easy to run multiple instances of the same version on the same machine by using different startup scripts and config files. I do this for my broadcastify streams with very good success. Graham
Thank you too Graham....Once I get it working again will try them in this manner.... On Tuesday, April 17, 2018, 7:55:33 PM CDT, gnorbury@bondcar.com [op25-dev] <op25-dev@yahoogroups.com> wrote: You can have both versions reside on the same machine (virtual or real) but only one can be "installed" in /usr/local at a time. I accomplish this by cloning the various repos into separate directories then sym-linking the one I want to use to "~/op25" prior to running a 'make install'. e.g. git clone https://git.osmocom.org/op25 op25.max git clone https://github.com/boatbod/op25 op25.boat ln -s ~/op25.max ~/op25 cd ~/op25/build cmake ../ make sudo make install cd ~ rm op25 ln -s op25.boat op25 cd ~/op25/build cmake ../ make sudo make install As an aside, it's very easy to run multiple instances of the same version on the same machine by using different startup scripts and config files. I do this for my broadcastify streams with very good success. Graham
Thanks Bill and all for all your help....i did have it working on ubuntu 14 and by working I was hearing traffic both ways....I have installed ubuntu 16.04 , updated it, loaded the max branch that your referring to from the boatbod URL...I then su to root and run the install.sh script....it runs but am having no sound again...is your ubuntu the 14 or 16 version? I'll wait on hearing back and go from there....thanks again for everyones help too.... On Wednesday, April 11, 2018, 3:30:05 PM CDT, 'William Becks' wa8wg@centurytel.net [op25-dev] <op25-dev@yahoogroups.com> wrote: Dick, I have op25 running on two separate Ubuntu 16.04 Virtual Machines in Oracle VirtualBox. One of the VM’s has the MAX branch while the other has Graham’s [Boadbod] version. I believe you are using virtualization and can accomplish this much easier than trying to install both on the same machine and having to keep the two versions from conflicting with each other. I’ve not installed the Osmocom version in a long time because of the numerous code and feature improvements by Max, Graham, and a few other contributors. Bill From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] Sent: Wednesday, April 11, 2018 3:08 PM To: op25-dev@yahoogroups.com Subject: Re: [op25-dev] Some help with Error in `python' please Can you install both versions of op25, ie. max branch and osmocom op25 version on the same installation of ubuntu and it work?
Dick, There should be no issues moving to Ubuntu 16.04 unless you don’t you’re missing an rx.py command line option or have an incorrect virtual machine audio setting. Have you tired running speaker-test (speaker-test -t sine -f 400 -c 2) from the terminal? Alternatively you can click into the system settings on the desktop then select sound where you can use the GUI tool to configure and test your speakers. It that checks out, then please post your rx.py command line and trunk.tsv files. Bill From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] Sent: Wednesday, April 18, 2018 12:45 PM To: op25-dev@yahoogroups.com Subject: Re: RE: [op25-dev] Some help with Error in `python' please Thanks Bill and all for all your help....i did have it working on ubuntu 14 and by working I was hearing traffic both ways.....I have installed ubuntu 16.04 , updated it, loaded the max branch that your referring to from the boatbod URL...I then su to root and run the install.sh script....it runs but am having no sound again...is your ubuntu the 14 or 16 version? I'll wait on hearing back and go from there....thanks again for everyones help too.... On Wednesday, April 11, 2018, 3:30:05 PM CDT, 'William Becks' wa8wg@centurytel.net [op25-dev] <op25-dev@yahoogroups.com> wrote: Dick, I have op25 running on two separate Ubuntu 16.04 Virtual Machines in Oracle VirtualBox. One of the VM’s has the MAX branch while the other has Graham’s [Boadbod] version. I believe you are using virtualization and can accomplish this much easier than trying to install both on the same machine and having to keep the two versions from conflicting with each other. I’ve not installed the Osmocom version in a long time because of the numerous code and feature improvements by Max, Graham, and a few other contributors. Bill From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] Sent: Wednesday, April 11, 2018 3:08 PM To: op25-dev@yahoogroups.com Subject: Re: [op25-dev] Some help with Error in `python' please Can you install both versions of op25, ie.. max branch and osmocom op25 version on the same installation of ubuntu and it work?
Bill Well, I installed Ubuntu 14.04, updated it, then used the boatbod version of op25. I compiled it as my userid and as root. they wouldn't start due to a divide by zero exception which I never had using Ubuntu 16.04. So, will re-install 16 and do the same thing. Once back to at least running I'll perform your sound test and go from there. BTW....is there a valid installation for wireshark as well? Thanks yet again for your help and time on this.....will let you know what happens.... On Wednesday, April 18, 2018, 3:38:54 PM CDT, 'William Becks' wa8wg@centurytel.net [op25-dev] <op25-dev@yahoogroups.com> wrote: Dick, There should be no issues moving to Ubuntu 16.04 unless you don’t you’re missing an rx.py command line option or have an incorrect virtual machine audio setting. Have you tired running speaker-test (speaker-test -t sine -f 400 -c 2) from the terminal? Alternatively you can click into the system settings on the desktop then select sound where you can use the GUI tool to configure and test your speakers. It that checks out, then please post your rx.py command line and trunk.tsv files. Bill From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] Sent: Wednesday, April 18, 2018 12:45 PM To: op25-dev@yahoogroups.com Subject: Re: RE: [op25-dev] Some help with Error in `python' please Thanks Bill and all for all your help.....i did have it working on ubuntu 14 and by working I was hearing traffic both ways.....I have installed ubuntu 16.04 , updated it, loaded the max branch that your referring to from the boatbod URL...I then su to root and run the install.sh script....it runs but am having no sound again...is your ubuntu the 14 or 16 version? I'll wait on hearing back and go from there.....thanks again for everyones help too.... On Wednesday, April 11, 2018, 3:30:05 PM CDT, 'William Becks' wa8wg@centurytel.net [op25-dev] <op25-dev@yahoogroups.com> wrote: Dick, I have op25 running on two separate Ubuntu 16.04 Virtual Machines in Oracle VirtualBox. One of the VM’s has the MAX branch while the other has Graham’s [Boadbod] version. I believe you are using virtualization and can accomplish this much easier than trying to install both on the same machine and having to keep the two versions from conflicting with each other. I’ve not installed the Osmocom version in a long time because of the numerous code and feature improvements by Max, Graham, and a few other contributors. Bill From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] Sent: Wednesday, April 11, 2018 3:08 PM To: op25-dev@yahoogroups.com Subject: Re: [op25-dev] Some help with Error in `python' please Can you install both versions of op25, ie.. max branch and osmocom op25 version on the same installation of ubuntu and it work?
Seems like you might have some of the old version libraries still installed in /usr/local? Hard to say, but usually the install.sh script found in the root of op25 takes care of all that needs to be done. If you get op25 running and still have no audio, post the beginning of the log file (stderr.2) so we can see if there are any clues why it's silent. Graham
tail: stderr.2: file truncated gr-osmosdr 0.1.4 (0.1.4) gnuradio 3.7.9 built-in source types: file osmosdr fcd rtl rtl_tcp uhd miri hackrf bladerf rfspace airspy redpitaya Using device #0 Realtek RTL2838UHIDIR SN: 00000001 Found Rafael Micro R820T tuner [R82XX] PLL not locked! Exact sample rate is: 1000000.026491 Hz [R82XX] PLL not locked! Using two-stage decimator for speed=1000000, decim=10/4 if1=100000 if2=25000 Project 25 IMBE Encoder/Decoder Fixed-Point implementation Developed by Pavel Yazev E-mail: pyazev@gmail.com Version 1.0 (c) Copyright 2009 This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; see the file ``LICENSE'' for details. op25_audio::open_socket(): enabled udp host(127.0.0.1), wireshark(23456), audio(23456) p25_frame_assembler_impl: do_imbe[1], do_output[0], do_audio_output[1], do_phase2_tdma[1], do_nocrypt[0] audio device: default On Wednesday, April 18, 2018, 5:12:36 PM CDT, gnorbury@bondcar.com [op25-dev] <op25-dev@yahoogroups.com> wrote: Seems like you might have some of the old version libraries still installed in /usr/local? Hard to say, but usually the install.sh script found in the root of op25 takes care of all that needs to be done. If you get op25 running and still have no audio, post the beginning of the log file (stderr.2) so we can see if there are any clues why it's silent. Graham
Dick, The source code for the Wireshark p25 dissector has disappeared from the osmocom.org website and seems to be a dead issue these days. It really serves no useful role in monitoring p25 trunked systems unless you specifically have a need for in-depth analysis. There is excellent debugging options available with the proper level of verbose enabled on the rx.py command line that dumps a host of information to the stderr log file. The error message you’re seeing in 14.04 is probably due to the need to create /etc/modprobe.d/dvb-blacklist.conf in support of the RTL-SDR dongle. When running 16.04 this is an not an issue and is an unnecessary step in your configuration tasks. Feel free to PM offline and I will be glad to help you get 16.04 + op25 up and running on VirtualBox. Bill From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] Sent: Wednesday, April 18, 2018 4:09 PM To: op25-dev@yahoogroups.com Subject: Re: RE: RE: [op25-dev] Some help with Error in `python' please Bill Well, I installed Ubuntu 14.04, updated it, then used the boatbod version of op25. I compiled it as my userid and as root. they wouldn't start due to a divide by zero exception which I never had using Ubuntu 16.04. So, will re-install 16 and do the same thing. Once back to at least running I'll perform your sound test and go from there. BTW....is there a valid installation for wireshark as well? Thanks yet again for your help and time on this.....will let you know what happens.... On Wednesday, April 18, 2018, 3:38:54 PM CDT, 'William Becks' wa8wg@centurytel.net [op25-dev] <op25-dev@yahoogroups.com> wrote: Dick, /etc/modprobe.d/dvb-blacklist.conf There should be no issues moving to Ubuntu 16.04 unless you don’t you’re missing an rx.py command line option or have an incorrect virtual machine audio setting. Have you tired running speaker-test (speaker-test -t sine -f 400 -c 2) from the terminal? Alternatively you can click into the system settings on the desktop then select sound where you can use the GUI tool to configure and test your speakers.. It that checks out, then please post your rx.py command line and trunk.tsv files. Bill From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] Sent: Wednesday, April 18, 2018 12:45 PM To: op25-dev@yahoogroups.com Subject: Re: RE: [op25-dev] Some help with Error in `python' please Thanks Bill and all for all your help.....i did have it working on ubuntu 14 and by working I was hearing traffic both ways......I have installed ubuntu 16.04 , updated it, loaded the max branch that your referring to from the boatbod URL...I then su to root and run the install.sh script....it runs but am having no sound again...is your ubuntu the 14 or 16 version? I'll wait on hearing back and go from there.....thanks again for everyones help too.... On Wednesday, April 11, 2018, 3:30:05 PM CDT, 'William Becks' wa8wg@centurytel.net [op25-dev] <op25-dev@yahoogroups.com> wrote: Dick, I have op25 running on two separate Ubuntu 16.04 Virtual Machines in Oracle VirtualBox. One of the VM’s has the MAX branch while the other has Graham’s [Boadbod] version. I believe you are using virtualization and can accomplish this much easier than trying to install both on the same machine and having to keep the two versions from conflicting with each other. I’ve not installed the Osmocom version in a long time because of the numerous code and feature improvements by Max, Graham, and a few other contributors. Bill From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] Sent: Wednesday, April 11, 2018 3:08 PM To: op25-dev@yahoogroups.com Subject: Re: [op25-dev] Some help with Error in `python' please Can you install both versions of op25, ie.. max branch and osmocom op25 version on the same installation of ubuntu and it work?
A good basic audio test is: aplay /usr/share/sounds/alsa/Front_Center.wav It may be that you have multiple audio devices (e.g. an HDMI monitor) and the wrong one is being used by default. ~iain On Wed, Apr 18, 2018 at 1:31 PM, 'William Becks' wa8wg@centurytel.net [op25-dev] <op25-dev@yahoogroups.com> wrote:
Dick,
There should be no issues moving to Ubuntu 16.04 unless you don’t you’re missing an rx.py command line option or have an incorrect virtual machine audio setting. Have you tired running speaker-test (speaker-test -t sine -f 400 -c 2) from the terminal? Alternatively you can click into the system settings on the desktop then select sound where you can use the GUI tool to configure and test your speakers.
It that checks out, then please post your rx.py command line and trunk.tsv files.
Bill
From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] Sent: Wednesday, April 18, 2018 12:45 PM To: op25-dev@yahoogroups.com Subject: Re: RE: [op25-dev] Some help with Error in `python' please
Thanks Bill and all for all your help.....i did have it working on ubuntu 14 and by working I was hearing traffic both ways.....I have installed ubuntu 16.04 , updated it, loaded the max branch that your referring
to from the boatbod URL...I then su to root and run the install.sh script....it runs but am having no sound again...is your ubuntu the 14 or 16 version? I'll wait on hearing back and go from there.....thanks again for everyones help too....
On Wednesday, April 11, 2018, 3:30:05 PM CDT, 'William Becks' wa8wg@centurytel.net [op25-dev] <op25-dev@yahoogroups.com> wrote:
Dick,
I have op25 running on two separate Ubuntu 16.04 Virtual Machines in Oracle VirtualBox. One of the VM’s has the MAX branch while the other has Graham’s [Boadbod] version. I believe you are using virtualization and can accomplish this much easier than trying to install both on the same machine and having to keep the two versions from conflicting with each other. I’ve not installed the Osmocom version in a long time because of the numerous code and feature improvements by Max, Graham, and a few other contributors.
Bill
From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] Sent: Wednesday, April 11, 2018 3:08 PM To: op25-dev@yahoogroups.com Subject: Re: [op25-dev] Some help with Error in `python' please
Can you install both versions of op25, ie.. max branch and osmocom op25 version on the same installation
of ubuntu and it work?
I brought up alsamixer and it was in default mode....there was another digital mode but i manually set it to default....thanks too On Wednesday, April 18, 2018, 5:28:37 PM CDT, iain macdonnell - N6ML n6ml@dseven.org [op25-dev] <op25-dev@yahoogroups.com> wrote: A good basic audio test is: aplay /usr/share/sounds/alsa/Front_Center.wav It may be that you have multiple audio devices (e.g. an HDMI monitor) and the wrong one is being used by default. ~iain On Wed, Apr 18, 2018 at 1:31 PM, 'William Becks' wa8wg@centurytel.net [op25-dev] <op25-dev@yahoogroups.com> wrote:
Dick,
There should be no issues moving to Ubuntu 16.04 unless you don’t you’re missing an rx.py command line option or have an incorrect virtual machine audio setting. Have you tired running speaker-test (speaker-test -t sine -f 400 -c 2) from the terminal? Alternatively you can click into the system settings on the desktop then select sound where you can use the GUI tool to configure and test your speakers.
It that checks out, then please post your rx.py command line and trunk..tsv files.
Bill
From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] Sent: Wednesday, April 18, 2018 12:45 PM To: op25-dev@yahoogroups.com Subject: Re: RE: [op25-dev] Some help with Error in `python' please
Thanks Bill and all for all your help.....i did have it working on ubuntu 14 and by working I was hearing traffic both ways.....I have installed ubuntu 16.04 , updated it, loaded the max branch that your referring
to from the boatbod URL...I then su to root and run the install.sh script....it runs but am having no sound again...is your ubuntu the 14 or 16 version? I'll wait on hearing back and go from there.....thanks again for everyones help too....
On Wednesday, April 11, 2018, 3:30:05 PM CDT, 'William Becks' wa8wg@centurytel.net [op25-dev] <op25-dev@yahoogroups.com> wrote:
Dick,
I have op25 running on two separate Ubuntu 16.04 Virtual Machines in Oracle VirtualBox. One of the VM’s has the MAX branch while the other has Graham’s [Boadbod] version. I believe you are using virtualization and can accomplish this much easier than trying to install both on the same machine and having to keep the two versions from conflicting with each other. I’ve not installed the Osmocom version in a long time because of the numerous code and feature improvements by Max, Graham, and a few other contributors.
Bill
From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] Sent: Wednesday, April 11, 2018 3:08 PM To: op25-dev@yahoogroups.com Subject: Re: [op25-dev] Some help with Error in `python' please
Can you install both versions of op25, ie.. max branch and osmocom op25 version on the same installation
of ubuntu and it work?
Bill....below is the stderr.2 file that executes....i did perform the audio tests and they all work....just no audio....I have a scanner going on the same frequency that i've got this monintorng and I do see the listing of communications, just no audio....I think I mentioned that I'm using the boatbod op25, and when I input a different frequency I thought the displayed frequency would change but it doesn't. It also seems the SDR isn't changed either....but for now just working on getting audio.....thanks again for your efforts... On Wednesday, April 18, 2018, 3:38:54 PM CDT, 'William Becks' wa8wg@centurytel.net [op25-dev] <op25-dev@yahoogroups.com> wrote: Dick, There should be no issues moving to Ubuntu 16.04 unless you don’t you’re missing an rx.py command line option or have an incorrect virtual machine audio setting. Have you tired running speaker-test (speaker-test -t sine -f 400 -c 2) from the terminal? Alternatively you can click into the system settings on the desktop then select sound where you can use the GUI tool to configure and test your speakers. It that checks out, then please post your rx.py command line and trunk.tsv files. Bill From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] Sent: Wednesday, April 18, 2018 12:45 PM To: op25-dev@yahoogroups.com Subject: Re: RE: [op25-dev] Some help with Error in `python' please Thanks Bill and all for all your help.....i did have it working on ubuntu 14 and by working I was hearing traffic both ways.....I have installed ubuntu 16.04 , updated it, loaded the max branch that your referring to from the boatbod URL...I then su to root and run the install.sh script....it runs but am having no sound again...is your ubuntu the 14 or 16 version? I'll wait on hearing back and go from there.....thanks again for everyones help too.... On Wednesday, April 11, 2018, 3:30:05 PM CDT, 'William Becks' wa8wg@centurytel.net [op25-dev] <op25-dev@yahoogroups.com> wrote: Dick, I have op25 running on two separate Ubuntu 16.04 Virtual Machines in Oracle VirtualBox. One of the VM’s has the MAX branch while the other has Graham’s [Boadbod] version. I believe you are using virtualization and can accomplish this much easier than trying to install both on the same machine and having to keep the two versions from conflicting with each other. I’ve not installed the Osmocom version in a long time because of the numerous code and feature improvements by Max, Graham, and a few other contributors. Bill From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] Sent: Wednesday, April 11, 2018 3:08 PM To: op25-dev@yahoogroups.com Subject: Re: [op25-dev] Some help with Error in `python' please Can you install both versions of op25, ie.. max branch and osmocom op25 version on the same installation of ubuntu and it work?
Could you share the command that you're using to launch op25 ? ~iain On Wed, Apr 18, 2018 at 6:42 PM, Dick Wad bwmzzzx@yahoo.com [op25-dev] <op25-dev@yahoogroups.com> wrote:
Bill....below is the stderr.2 file that executes.....i did perform the audio tests and they all work....just no audio....I have a scanner going on the same frequency that i've got this monintorng and I do see the listing of communications, just no audio....I think I mentioned that I'm using the boatbod op25, and when I input a different frequency I thought the displayed frequency would change but it doesn't. It also seems the SDR isn't changed either....but for now just working on getting audio.....thanks again for your efforts...
On Wednesday, April 18, 2018, 3:38:54 PM CDT, 'William Becks' wa8wg@centurytel.net [op25-dev] <op25-dev@yahoogroups.com> wrote:
Dick,
There should be no issues moving to Ubuntu 16.04 unless you don’t you’re missing an rx.py command line option or have an incorrect virtual machine audio setting. Have you tired running speaker-test (speaker-test -t sine -f 400 -c 2) from the terminal? Alternatively you can click into the system settings on the desktop then select sound where you can use the GUI tool to configure and test your speakers..
It that checks out, then please post your rx.py command line and trunk.tsv files.
Bill
From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] Sent: Wednesday, April 18, 2018 12:45 PM To: op25-dev@yahoogroups.com Subject: Re: RE: [op25-dev] Some help with Error in `python' please
Thanks Bill and all for all your help.....i did have it working on ubuntu 14 and by working I was hearing traffic both ways......I have installed ubuntu 16.04 , updated it, loaded the max branch that your referring
to from the boatbod URL...I then su to root and run the install.sh script...it runs but am having no sound again...is your ubuntu the 14 or 16 version? I'll wait on hearing back and go from there.....thanks again for everyones help too....
On Wednesday, April 11, 2018, 3:30:05 PM CDT, 'William Becks' wa8wg@centurytel.net [op25-dev] <op25-dev@yahoogroups.com> wrote:
Dick,
I have op25 running on two separate Ubuntu 16.04 Virtual Machines in Oracle VirtualBox. One of the VM’s has the MAX branch while the other has Graham’s [Boadbod] version. I believe you are using virtualization and can accomplish this much easier than trying to install both on the same machine and having to keep the two versions from conflicting with each other. I’ve not installed the Osmocom version in a long time because of the numerous code and feature improvements by Max, Graham, and a few other contributors.
Bill
From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] Sent: Wednesday, April 11, 2018 3:08 PM To: op25-dev@yahoogroups.com Subject: Re: [op25-dev] Some help with Error in `python' please
Can you install both versions of op25, ie.. max branch and osmocom op25 version on the same installation
of ubuntu and it work?
participants (6)
-
'William Becks' wa8wg＠centurytel.net [op25-dev] -
Dick Wad bwmzzzx＠yahoo.com [op25-dev]
-
gnorbury＠bondcar.com [op25-dev]
-
iain macdonnell - N6ML n6ml＠dseven.org [op25-dev]
-
John Ackermann N8UR jra＠febo.com [op25-dev]
-
kc9lwk＠sbcglobal.net [op25-dev]