Hi Richard,
Thanks for your email - again I must apologise. I just haven't had the time
to update my OP25 code. I have made significant changes to the original
checkout (ancient r216), and never got around to updating for fear of major
merge conflicts.
Therefore, these issues are only becoming apparent when good souls such as
yourself try the code and provide feedback J
If you would like to make the change and send me a patch, I'd be more than
happy to apply it and update gr-baz.
Thanks again.
Kind regards,
Balint
From: op25-dev(a)yahoogroups.com [mailto:op25-dev@yahoogroups.com] On Behalf
Of Richard Clarke
Sent: Friday, 20 April 2012 1:55 PM
To: Balint
Cc: op25-dev(a)yahoogroups.com
Subject: [op25-dev] gr-baz : op25.py has dependence on fsk4
Hi Balint,
I notice that your op25.py module still has a dependence on the old
<http://radiorausch.googlepages.com/GnuradioFourLevelFSK.html> Radio Rausch
FSK4 demodulator that the OP25 project used to use but have now incorporated
into their own source files. I was just wondering if there was any reason
you didn't use the op25.fsk4_demod_ff rather instead of fsk4.demod_ff? You
have, on the other hand, used the op25 slicer equivalent
op25.fsk4_slicer_fb(levels). Just curious.
Thanks
Cheers
Richard
On 20 April 2012 11:10, Balint <balint256(a)hotmail.com> wrote:
I've just accepted the git pull request submitted by Alex Csete (thank you!)
to fix the build issue on v3.6 of GNU Radio (tested by 'zignig'), so if you
grab the latest, hopefully this issue will disappear!
(If other people have encountered this problem, please let them know too.)
From: op25-dev(a)yahoogroups.com [mailto:op25-dev@yahoogroups.com] On Behalf
Of Richard Clarke
Sent: Friday, 20 April 2012 8:24 AM
To: op25-dev(a)yahoogroups.com
Subject: Re: [op25-dev] Re: World's cheapest P25 receiver: $20 RTL2832
dongle + new OP25 Decoder block with DES-OFB for GRC!
Hi,
I've just tried building the gr-baz module on a couple of different systems
but I'm encountering a make error along the lines of: ./baz_swig.cc: No such
file or directory
I note someone else has also encountered the same error and pasted their
make output to pastebin (
http://pastebin.com/y6dUAxC1). This is the same
error I'm getting. Anyone got any clues? Is this a generated file that isn't
being generated, or a file that hasn't been included in the svn repo?
Thanks
Cheers
Richard
On 6 April 2012 02:14, Balint <balint256(a)hotmail.com> wrote:
LOL, I thought someone might say that J
Nice work at that price!!!
From: op25-dev(a)yahoogroups.com [mailto:op25-dev@yahoogroups.com] On Behalf
Of ikjtel
Sent: Friday, 6 April 2012 12:07 AM
To: op25-dev(a)yahoogroups.com
Subject: [op25-dev] Re: World's cheapest P25 receiver: $20 RTL2832 dongle +
new OP25 Decoder block with DES-OFB for GRC!
Firstly, thank you to Max for the Slashdot mention!
Ha ha, it's a pleasure to see this project move forward.
The cheapest one I've ever built was for $1.00 - picked up an old crystal
scanner at a hamfest that happened to have a crystal in it on the proper
frequency for a local P25 station. It only needed a disc-tap using parts
from the junkbox...
Max
--
SCOTT ADAMS: Normal people believe that if it ain't broke, don't fix it.
Engineers believe that if it ain't broke, it doesn't have enough features
yet.
--
SCOTT ADAMS: Normal people believe that if it ain't broke, don't fix it.
Engineers believe that if it ain't broke, it doesn't have enough features
yet.