24 Oct
2010
24 Oct
'10
1:24 a.m.
Hi Patrick
The scenario that I find most attractive is 2, can associate with a PC
with a card pcmcia to any type of FP either an asterisk or any other
manufacturer's base seems exciting.
I'll be anxious to try any new developments that take place in the
software, if you think that the slides can be useful for the web I can
send examples to illustrate the sources, since it is a topic largely
unknown in Spain and could help. Anything that can help you be an honor
for me.
Thank you very much for your work
Heavy greetings
On Sat, 23 Oct 2010 18:29:29 +0200, Patrick McHardy wrote:
Am 21.10.2010 12:37, schrieb Oscar Soriano Riera:
Hi Patrick
I have a question about the architecture and software development
today.
I've prepared an image(Dect-labv1.0.jpg) on the 3 scenarios in which
I
work, basically would be the following:
1) DECT Terminals Connected to Asterisk
This lab works perfectly, with the latest versions that have posted
until today.
2) Connect a PC card pcmcia Dosh & Amand like a Portable Part (PP)
You can use a pc with a pcmcia and associate as a PP to asterisk
server-Dect for make calls with other users?, I have questions /
problems as a register from the laptop to asterix
3) Linking two Asterisk servers using the DECT protocol to share
calls
between PBXs
It is possible this configuration?
Both 2) and 3) certainly can be done, but are not implemented - its
basically the same thing, in scenario 3) one of the asterisk servers
would pose as PP. It shouldn't be that much work to add support for
this to the asterisk dect channel plugin, I'd estimate a few hours.