osmocom dect PP-mode

Hello, I am currently playing with Osmocom DECT software stack using COM-ON-AIR PCI card. What I am trying to achieve is to configure test PC as portable part and connect it to DECT base station. I have cloned and successfully compiled the following repos: git://dect.osmocom.org/linux-2.6.git git://dect.osmocom.org/libnl.git git://dect.osmocom.org/libdect.git Following instructions on dect.osmocom.org/wiki/Configuration page I configured PP. However, the example app dect-llme-scan was able to work only after uncommenting line: //nl_dect_llme_mac_info_set_pari(lmsg, pari); With the line above uncommented, dect-llme-scan returns the list of available base stations. So I assume, that hardware and most part of software works. Then I tried to use example pp-access-rights to connect to the test base station. This app fails immediately after launch for the same reason as dect-llme-scan. Thus, I have added nl_dect_llme_mac_info_set_pari(lmsg, pari); with empty PARI to dect_netlink_mac_me_info_req(struct dect_handle *dh) function. With this modification, the example moves farther, but fails anyway with "No such file or directory" message on this line: if (connect(ddl->dfd->fd, (struct sockaddr *)&ddl->dlei, sizeof(ddl->dlei)) < 0 && errno != EAGAIN) goto err3; in file lce.c All in all. May I at first ask about how to properly configure portable part? Here I have to specify EMC and FPN of the base station? # dect-cluster-add --name cluster0 --mode fp --emc 0x1182 --fpn 0x0fac3 # dect-cell-add --name cell0 --cluster cluster0 # dect-transceiver-bind --transceiver trx0 --cell cell0 What should I use here as IPUI? Some random identifier of my PP? # pp-access-rights --cluster cluster0 --pin 0000 --ipui 0x11830fac4 And, in general, are the sources in repos I listed previously were tested in PP mode or they are not fully functional yet? Thanks in advance. :) -- WBR, Pavel