See <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--without-sse,WITH_MANUALS=1,a3=default,a4=default,label=osmocom-master-debian9/2626/display/redirect> Changes: ------------------------------------------ [...truncated 105.84 KB...] \! -f `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` \ || ln -s `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` ../common/`basename 'eeprom_boot.a51'` sdas8051 -plosgff `basename 'eeprom_boot.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o eeprom_init.rel `test -f 'eeprom_init.c' || echo './'`eeprom_init.c test -f `basename '_startup.a51'` || ln -s '_startup.a51' . test -f ../common/`basename '_startup.a51'` -o \ \! -f `dirname '_startup.a51'`/../common/`basename '_startup.a51'` \ || ln -s `dirname '_startup.a51'`/../common/`basename '_startup.a51'` ../common/`basename '_startup.a51'` sdas8051 -plosgff `basename '_startup.a51'` sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o eeprom_boot.ihx eeprom_boot.rel eeprom_init.rel _startup.rel ./../common/build_eeprom.py -p/build/deps/install/stow/libusrp -r2 eeprom_boot.ihx > burn-usrp2-eeprom chmod +x burn-usrp2-eeprom ./../common/build_eeprom.py -p/build/deps/install/stow/libusrp -r4 eeprom_boot.ihx > burn-usrp4-eeprom chmod +x burn-usrp4-eeprom test -f `basename 'vectors.a51'` || ln -s 'vectors.a51' . test -f ../common/`basename 'vectors.a51'` -o \ \! -f `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` \ || ln -s `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` ../common/`basename 'vectors.a51'` sdas8051 -plosgff `basename 'vectors.a51'` srcdir=. ./edit-gpif ./gpif.c usrp_gpif.c usrp_gpif_inline.h sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_main.rel `test -f 'usrp_main.c' || echo './'`usrp_main.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_common.rel `test -f 'usrp_common.c' || echo './'`usrp_common.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o board_specific.rel `test -f 'board_specific.c' || echo './'`board_specific.c board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'bits' board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'mask' sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o fpga_load.rel `test -f 'fpga_load.c' || echo './'`fpga_load.c ../common/fpga_load.c:139: warning 85: in function clock_out_config_byte unreferenced function argument : 'bits' ../common/fpga_load.c:181: warning 126: unreachable code sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o fpga_rev2.rel `test -f 'fpga_rev2.c' || echo './'`fpga_rev2.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o init_gpif.rel `test -f 'init_gpif.c' || echo './'`init_gpif.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_gpif.rel `test -f 'usrp_gpif.c' || echo './'`usrp_gpif.c usrp_gpif.c:194: warning 158: overflow in implicit constant conversion usrp_gpif.c:194: warning 158: overflow in implicit constant conversion usrp_gpif.c:201: warning 158: overflow in implicit constant conversion usrp_gpif.c:201: warning 158: overflow in implicit constant conversion test -f `basename 'usb_descriptors.a51'` || ln -s 'usb_descriptors.a51' . test -f ../common/`basename 'usb_descriptors.a51'` -o \ \! -f `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` \ || ln -s `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` ../common/`basename 'usb_descriptors.a51'` sdas8051 -plosgff `basename 'usb_descriptors.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o spi.rel `test -f 'spi.c' || echo './'`spi.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o eeprom_io.rel `test -f 'eeprom_io.c' || echo './'`eeprom_io.c sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o std.ihx vectors.rel usrp_main.rel usrp_common.rel board_specific.rel fpga_load.rel fpga_rev2.rel init_gpif.rel usrp_gpif.rel usb_descriptors.rel spi.rel eeprom_io.rel _startup.rel make[5]: Entering directory '/build/deps/libusrp/firmware/src/usrp2' make[5]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/deps/install/stow/libusrp/share/usrp/rev2' /usr/bin/install -c -m 644 std.ihx '/build/deps/install/stow/libusrp/share/usrp/rev2' /bin/mkdir -p '/build/deps/install/stow/libusrp/share/usrp/rev4' /usr/bin/install -c -m 644 std.ihx '/build/deps/install/stow/libusrp/share/usrp/rev4' make[5]: Leaving directory '/build/deps/libusrp/firmware/src/usrp2' make[4]: Leaving directory '/build/deps/libusrp/firmware/src/usrp2' make[4]: Entering directory '/build/deps/libusrp/firmware/src' make[5]: Entering directory '/build/deps/libusrp/firmware/src' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/build/deps/libusrp/firmware/src' make[4]: Leaving directory '/build/deps/libusrp/firmware/src' make[3]: Leaving directory '/build/deps/libusrp/firmware/src' make[3]: Entering directory '/build/deps/libusrp/firmware' make[4]: Entering directory '/build/deps/libusrp/firmware' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/deps/libusrp/firmware' make[3]: Leaving directory '/build/deps/libusrp/firmware' make[2]: Leaving directory '/build/deps/libusrp/firmware' make[2]: Entering directory '/build/deps/libusrp' make[3]: Entering directory '/build/deps/libusrp' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/deps/install/stow/libusrp/lib/pkgconfig' /usr/bin/install -c -m 644 usrp.pc '/build/deps/install/stow/libusrp/lib/pkgconfig' make[3]: Leaving directory '/build/deps/libusrp' make[2]: Leaving directory '/build/deps/libusrp' make[1]: Leaving directory '/build/deps/libusrp' + STOW_DIR=/build/deps/install/stow stow --restow libusrp =============================== osmo-trx =============================== + export PKG_CONFIG_PATH=/build/deps/install/lib/pkgconfig: + export LD_LIBRARY_PATH=/build/deps/install/lib + export PATH=/build/deps/install/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin + CONFIG=--enable-sanitize --enable-werror --with-uhd --with-usrp1 --with-lms --with-ipc --without-sse + [ 1 = 1 ] + CONFIG=--enable-sanitize --enable-werror --with-uhd --with-usrp1 --with-lms --with-ipc --without-sse --enable-manuals + set +x + cd /build + autoreconf --install --force libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'config'. libtoolize: copying file 'config/libtool.m4' libtoolize: copying file 'config/ltoptions.m4' libtoolize: copying file 'config/ltsugar.m4' libtoolize: copying file 'config/ltversion.m4' libtoolize: copying file 'config/lt~obsolete.m4' configure.ac:46: installing './compile' configure.ac:31: installing './config.guess' configure.ac:31: installing './config.sub' configure.ac:35: installing './install-sh' configure.ac:35: installing './missing' CommonLibs/Makefile.am: installing './depcomp' + ./configure --enable-sanitize --enable-werror --with-uhd --with-usrp1 --with-lms --with-ipc --without-sse --enable-manuals checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking target system type... x86_64-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... gcc3 checking dependency style of gcc... gcc3 checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) gcc3 checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking whether g++ supports C++11 features by default... yes checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking for rm... /bin/rm checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... dlltool checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for ANSI C header files... (cached) yes checking byteswap.h usability... yes checking byteswap.h presence... yes checking for byteswap.h... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking for size_t... yes checking whether time.h and sys/time.h may both be included... yes checking whether byte ordering is bigendian... no checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODING... yes checking boost/config.hpp usability... yes checking boost/config.hpp presence... yes checking for boost/config.hpp... yes checking for USRP... yes checking for LMS... no configure: error: Package requirements (LimeSuite) were not met: No package 'LimeSuite' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LMS_CFLAGS and LMS_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE