See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=rpi4-raspbian11/9247/display/redirect> Changes: ------------------------------------------ [...truncated 207.33 KB...] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 6 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 6 dB => 8 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 8 dB => 10 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 10 dB => 12 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 12 dB => 14 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 14 dB => 16 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 16 dB => 18 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 18 dB => 20 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 20 dB: max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 20 dB: max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 20 dB => 16 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 16 dB => 12 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 12 dB => 8 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 4 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 4 dB => 0 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 4 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 8 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 8 dB => 12 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 12 dB => 16 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 16 dB => 20 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 20 dB: max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 20 dB => 14 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 14 dB => 8 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 2 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 2 dB => 0 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(31), RXQUAL-FULL(0), RXLEV-SUB(31), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 10 dB => 11 dB:max 20 dB, RSSI[curr -79, avg -79, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(32), RXQUAL-FULL(0), RXLEV-SUB(32), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 11 dB => 13 dB:max 20 dB, RSSI[curr -78, avg -78, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 13 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(33), RXQUAL-FULL(0), RXLEV-SUB(33), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 13 dB => 16 dB:max 20 dB, RSSI[curr -77, avg -77, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(29), RXQUAL-FULL(0), RXLEV-SUB(29), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 10 dB => 9 dB:max 20 dB, RSSI[curr -81, avg -81, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 9 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(27), RXQUAL-FULL(0), RXLEV-SUB(27), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 9 dB => 6 dB:max 20 dB, RSSI[curr -83, avg -83, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 6 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(25), RXQUAL-FULL(0), RXLEV-SUB(25), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 6 dB => 1 dB:max 20 dB, RSSI[curr -85, avg -85, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 1 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(00), RXQUAL-FULL(7), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is enabled => using SUB -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(3), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is enabled => using SUB -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(63), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is enabled => using SUB -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(1), RXLEV-SUB(30), RXQUAL-SUB(1), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 1, avg 1, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(2), RXLEV-SUB(30), RXQUAL-SUB(2), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 2, avg 2, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(3), RXLEV-SUB(30), RXQUAL-SUB(3), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 3, avg 3, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(4), RXLEV-SUB(30), RXQUAL-SUB(4), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 16 dB => 12 dB:max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 4, avg 4, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(34), RXQUAL-FULL(5), RXLEV-SUB(34), RXQUAL-SUB(5), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 12 dB => 8 dB:max 20 dB, RSSI[curr -76, avg -76, thresh -80..-80] dBm, RxQual[curr 5, avg 5, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(38), RXQUAL-FULL(6), RXLEV-SUB(38), RXQUAL-SUB(6), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 4 dB:max 20 dB, RSSI[curr -72, avg -72, thresh -80..-80] dBm, RxQual[curr 6, avg 6, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(42), RXQUAL-FULL(7), RXLEV-SUB(42), RXQUAL-SUB(7), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 4 dB => 0 dB:max 20 dB, RSSI[curr -68, avg -68, thresh -80..-80] dBm, RxQual[curr 7, avg 7, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(46), RXQUAL-FULL(7), RXLEV-SUB(46), RXQUAL-SUB(7), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -64, avg -64, thresh -80..-80] dBm, RxQual[curr 7, avg 7, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(46), RXQUAL-FULL(0), RXLEV-SUB(46), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 2 dB:max 20 dB, RSSI[curr -64, avg -64, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(44), RXQUAL-FULL(0), RXLEV-SUB(44), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 2 dB => 4 dB:max 20 dB, RSSI[curr -66, avg -66, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(42), RXQUAL-FULL(0), RXLEV-SUB(42), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 6 dB:max 20 dB, RSSI[curr -68, avg -68, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(7), RXLEV-SUB(30), RXQUAL-SUB(7), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 7, avg 7, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(7), RXLEV-SUB(30), RXQUAL-SUB(7), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 0 dB: max 20 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 7, avg 7, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 2 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 2 dB => 4 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 6 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 6 dB => 8 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 4 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 4 dB => 0 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 0 dB => 2 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 2 dB => 4 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 4 dB => 6 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 6 dB => 8 dB:max 20 dB, RSSI[curr -50, avg -50, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(60), RXQUAL-FULL(0), RXLEV-SUB(60), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 8 dB => 4 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(10), RXQUAL-FULL(0), RXLEV-SUB(10), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 4 dB => 0 dB:max 20 dB, RSSI[curr -100, avg -100, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(31), RXQUAL-FULL(0), RXLEV-SUB(31), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 12 dB => 13 dB:max 16 dB, RSSI[curr -79, avg -79, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 13 dB => 11 dB:max 16 dB, RSSI[curr -82, avg -82, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(33), RXQUAL-FULL(0), RXLEV-SUB(33), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 11 dB => 13 dB:max 16 dB, RSSI[curr -77, avg -77, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 13 dB => 11 dB:max 16 dB, RSSI[curr -82, avg -82, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(31), RXQUAL-FULL(0), RXLEV-SUB(31), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 16 dB, RSSI[curr -79, avg -79, thresh -83..-77] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 16 dB, RSSI[curr -82, avg -82, thresh -83..-77] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(33), RXQUAL-FULL(0), RXLEV-SUB(33), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 16 dB, RSSI[curr -77, avg -77, thresh -83..-77] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(28), RXQUAL-FULL(0), RXLEV-SUB(28), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 11 dB: max 16 dB, RSSI[curr -82, avg -82, thresh -83..-77] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 30 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(30), RXQUAL-FULL(0), RXLEV-SUB(30), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Keeping DL attenuation at 16 dB: max 30 dB, RSSI[curr -80, avg -80, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(26), RXQUAL-FULL(0), RXLEV-SUB(26), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 16 dB => 14 dB:max 30 dB, RSSI[curr -84, avg -82, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(26), RXQUAL-FULL(0), RXLEV-SUB(26), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Lowering DL attenuation 14 dB => 11 dB:max 30 dB, RSSI[curr -84, avg -83, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(35), RXQUAL-FULL(0), RXLEV-SUB(35), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 11 dB => 12 dB:max 30 dB, RSSI[curr -75, avg -79, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] -(bts=0,trx=0,ts=0,ss=0) Rx DL Measurement Report: RXLEV-FULL(35), RXQUAL-FULL(0), RXLEV-SUB(35), RXQUAL-SUB(0), DTx is disabled => using FULL -(bts=0,trx=0,ts=0,ss=0) Raising DL attenuation 12 dB => 14 dB:max 30 dB, RSSI[curr -75, avg -77, thresh -80..-80] dBm, RxQual[curr 0, avg 0, thresh 3..0] 7. testsuite.at:41: 7. bs_power_loop (testsuite.at:41): FAILED (testsuite.at:45) ======================== ./tests/testsuite.dir/08/testsuite.log # -*- compilation -*- 8. testsuite.at:48: testing tx_power ... ./testsuite.at:52: $abs_top_builddir/tests/tx_power/tx_power_test --- experr 2024-01-09 16:18:37.985645101 +0000 +++ /build/tests/testsuite.dir/at-groups/8/stderr 2024-01-09 16:18:38.085642814 +0000 @@ -1,50 +1 @@ -(bts=0,trx=1) power_ramp_start(cur=0, tgt=40000) (bts=0,trx=1) Asked to ramp power up to 40000 mdBm, which exceeds P_max_out (33000) -(bts=0,trx=1) power_ramp_start(cur=0, tgt=33000) -(bts=0,trx=1) ramp_timer_cb(cur_pout=2000, tgt_pout=33000, ramp_att=31000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to -8000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=4000, tgt_pout=33000, ramp_att=29000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to -6000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=6000, tgt_pout=33000, ramp_att=27000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to -4000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=8000, tgt_pout=33000, ramp_att=25000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to -2000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=10000, tgt_pout=33000, ramp_att=23000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 0 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=12000, tgt_pout=33000, ramp_att=21000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 2000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=14000, tgt_pout=33000, ramp_att=19000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 4000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=16000, tgt_pout=33000, ramp_att=17000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 6000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=18000, tgt_pout=33000, ramp_att=15000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 8000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=20000, tgt_pout=33000, ramp_att=13000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 10000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=22000, tgt_pout=33000, ramp_att=11000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 12000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=24000, tgt_pout=33000, ramp_att=9000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 14000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=26000, tgt_pout=33000, ramp_att=7000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 16000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=28000, tgt_pout=33000, ramp_att=5000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 18000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=30000, tgt_pout=33000, ramp_att=3000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 20000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=32000, tgt_pout=33000, ramp_att=1000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 22000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=33000, tgt_pout=33000, ramp_att=0, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 23000 mdBm. -(bts=0,trx=1) power_ramp_start(cur=-10000, tgt=10000) -(bts=0,trx=1) ramp_timer_cb(cur_pout=0, tgt_pout=10000, ramp_att=10000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 0 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=2000, tgt_pout=10000, ramp_att=8000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 2000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=4000, tgt_pout=10000, ramp_att=6000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 4000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=6000, tgt_pout=10000, ramp_att=4000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 6000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=8000, tgt_pout=10000, ramp_att=2000, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 8000 mdBm. -(bts=0,trx=1) ramp_timer_cb(cur_pout=10000, tgt_pout=10000, ramp_att=0, therm_att=0, user_gain=0) -(bts=0,trx=1) ramping TRX board output power to 10000 mdBm. 8. testsuite.at:48: 8. tx_power (testsuite.at:48): FAILED (testsuite.at:52) Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 28069 killed; [ssh-agent] Stopped. Archiving artifacts