See
<https://jenkins.osmocom.org/jenkins/job/ttcn3-pcap-client-test/585/display/redirect>
Changes:
------------------------------------------
[...truncated 1.83 KB...]
Seen branch in repository origin/neels/wip
Seen branch in repository origin/osmith/fix-registry-pull
Seen branch in repository origin/osmith/fix-rpi-gnutls
Seen branch in repository origin/osmith/obs-2021q1
Seen branch in repository origin/osmith/rpm-local
Seen branch in repository origin/osmith/ttcn3-pass-args
Seen branch in repository origin/osmith/wip
Seen branch in repository origin/pespin/bts-perf
Seen branch in repository origin/pespin/ergw
Seen branch in repository origin/pespin/gtp1
Seen branch in repository origin/pmaier/fixmgw
Seen branch in repository origin/refsf/for/master/dyn-pdch
Seen 25 remote branches
git show-ref --tags -d # timeout=10
Checking out
Revision 0ecbb795c5418302bc01f663b64efc11c2794b80 (origin/master)
git config core.sparsecheckout # timeout=10
git checkout -f 0ecbb795c5418302bc01f663b64efc11c2794b80 # timeout=10
Commit
message: "ttcn3-{pgw,ggsn}-test: Update smf.yml with new metrics section
location"
git rev-list --no-walk
0ecbb795c5418302bc01f663b64efc11c2794b80 # timeout=10
[ttcn3-pcap-client-test] $
/bin/sh -xe /tmp/jenkins3562970100198024405.sh
+ export
REGISTRY_HOST=registry.osmocom.org
+ DIR=ttcn3-pcap-client-test
+ export IMAGE_SUFFIX=master
+ cd ttcn3-pcap-client-test
+ ./jenkins.sh
+ [ x = x ]
+ REPO_USER=osmocom-build
+ [
x<https://jenkins.osmocom.org/jenkins/job/ttcn3-pcap-client-test/ws/> = x ]
+
VOL_BASE_DIR=<https://jenkins.osmocom.org/jenkins/job/ttcn3-pcap-client-…
+ rm -rf <https://jenkins.osmocom.org/jenkins/job/ttcn3-pcap-client-test/ws/logs>
+ mkdir -p <https://jenkins.osmocom.org/jenkins/job/ttcn3-pcap-client-test/ws/logs>
+ [ ! -d <https://jenkins.osmocom.org/jenkins/job/ttcn3-pcap-client-test/ws/logs> ]
+ [ xjenkins-ttcn3-pcap-client-test-585 = x ]
+ basename
<https://jenkins.osmocom.org/jenkins/job/ttcn3-pcap-client-test/ws/ttcn3-pcap-client-test>
+ SUITE_NAME=ttcn3-pcap-client-test
+ NET_NAME=ttcn3-pcap-client-test
+ IMAGE_SUFFIX=master
+ docker_images_require osmo-pcap-master ttcn3-pcap-client-test
+ local i
+ local from_line
+ local pull_arg
+ local upstream_distro_arg
+ local distro_arg
+ local depends
+ local dir
+ [
registry.osmocom.org =
registry.osmocom.org ]
+ docker_depends osmo-pcap-master
+ local feed
+ echo debian-bullseye-build
+ depends=debian-bullseye-build
+ [ -n debian-bullseye-build ]
+ docker_images_require debian-bullseye-build
+ local i
+ local from_line
+ local pull_arg
+ local upstream_distro_arg
+ local distro_arg
+ local depends
+ local dir
+ [
registry.osmocom.org =
registry.osmocom.org ]
+ docker_depends debian-bullseye-build
+ local feed
+ depends=
+ [ -n ]
+ docker_distro_from_image_name debian-bullseye-build
+ echo debian-bullseye
+ distro_arg=debian-bullseye
+ [ -z ]
+ docker_upstream_distro_from_image_name debian-bullseye-build
+ echo debian:bullseye
+ upstream_distro_arg=debian:bullseye
+ docker_dir_from_image_name debian-bullseye-build
+ echo debian-bullseye-build
+ dir=debian-bullseye-build
+ pull_arg=--pull
+ grep ^FROM ../debian-bullseye-build/Dockerfile
+ from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO}
+ echo FROM ${REGISTRY}/${UPSTREAM_DISTRO}
+ grep -q $USER
+ echo Building image: debian-bullseye-build (export NO_DOCKER_IMAGE_BUILD=1 to prevent
this)
Building image: debian-bullseye-build (export NO_DOCKER_IMAGE_BUILD=1 to prevent this)
+ make -C ../debian-bullseye-build BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:bullseye
DISTRO=debian-bullseye IMAGE=osmocom-build/debian-bullseye-build
make: Entering directory
'<https://jenkins.osmocom.org/jenkins/job/ttcn3-pcap-client-test/ws/debian-bullseye-build'>
awk: fatal: cannot open file `.release' for reading (No such file or directory)
awk: fatal: cannot open file `.release' for reading (No such file or directory)
awk: fatal: cannot open file `.release' for reading (No such file or directory)
rm -rf .common
cp -r <https://jenkins.osmocom.org/jenkins/job/ttcn3-pcap-client-test/ws/common>
.common
INFO: .release created
release=0.0.0
docker build \
--build-arg USER=osmocom-build \
--build-arg UID=1000 \
--build-arg
REGISTRY=registry.osmocom.org \
--build-arg OSMO_TTCN3_BRANCH=master \
--build-arg UPSTREAM_DISTRO=debian:bullseye \
--build-arg DISTRO=debian-bullseye \
--build-arg
OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \
--build-arg OSMOCOM_REPO_PATH=packages/osmocom: \
--build-arg OSMOCOM_REPO_VERSION=latest \
--build-arg
OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \
--build-arg LIBOSMOCORE_BRANCH=master \
--build-arg OSMO_BB_BRANCH=master \
--build-arg OSMO_BSC_BRANCH=master \
--build-arg OSMO_BTS_BRANCH=master \
--build-arg OSMO_CBC_BRANCH=master \
--build-arg OSMO_GBPROXY_BRANCH=master \
--build-arg OSMO_GGSN_BRANCH=master \
--build-arg OSMO_GSM_TESTER_BRANCH=master \
--build-arg OSMO_HLR_BRANCH=master \
--build-arg OSMO_HNBGW_BRANCH=master \
--build-arg OSMO_HNODEB_BRANCH=master \
--build-arg OSMO_IUH_BRANCH=master \
--build-arg OSMO_MGW_BRANCH=master \
--build-arg OSMO_MSC_BRANCH=master \
--build-arg OSMO_NITB_BRANCH=master \
--build-arg OSMO_PCU_BRANCH=master \
--build-arg OSMO_SGSN_BRANCH=master \
--build-arg OSMO_SIP_BRANCH=master \
--build-arg OSMO_STP_BRANCH=master \
--build-arg OSMO_UECUPS_BRANCH=master \
--build-arg OPEN5GS_BRANCH=main \
--pull -t osmocom-build/debian-bullseye-build:latest .
Sending build context to Docker daemon 25.6kB
Step 1/11 : ARG REGISTRY=docker.io
Step 2/11 : ARG UPSTREAM_DISTRO=debian:bullseye
Step 3/11 : FROM ${REGISTRY}/${UPSTREAM_DISTRO}
bullseye: Pulling from debian
Digest: sha256:34b24056f28be0f9b3f6c5b2417a0976d692261e3fe404f5da5fbe4b2b71f15a
Status: Image is up to date for
registry.osmocom.org/debian:bullseye
---> c31f65dd4cc9
Step 4/11 : ARG OSMOCOM_REPO_MIRROR="https://downloads.osmocom.org"
---> Using cache
---> 9720b36eeccf
Step 5/11 : ARG OSMOCOM_REPO_PATH="packages/osmocom:"
---> Using cache
---> 405928149657
Step 6/11 :
ARG OSMOCOM_REPO="$OSMOCOM_REPO_MIRROR/${OSMOCOM_REPO_PATH}/nightly/Debian_11/"
---> Using cache
---> d0f3480cad67
Step 7/11 : RUN apt-get update && apt-get upgrade -y && apt-get install
-y --no-install-recommends autoconf autoconf-archive autogen automake bison
build-essential ca-certificates cppcheck dahdi-source debhelper devscripts
dh-autoreconf doxygen equivs flex g++ gawk gcc gcc-arm-none-eabi git
git-buildpackage gnupg libc-ares-dev libdbd-sqlite3 libdbi-dev libfftw3-dev
libgnutls28-dev libgps-dev libgsm1-dev libmnl-dev libncurses5-dev
libnewlib-arm-none-eabi libortp-dev libpcap-dev libpcsclite-dev libtalloc-dev
libtool libreadline-dev libsctp-dev libsofia-sip-ua-glib-dev libsqlite3-dev
libssl-dev libusb-dev libusb-1.0-0-dev make pkg-config sqlite3 stow telnet
wget && apt-get clean
---> Using cache
---> f4aa85357d22
Step 8/11 : COPY .common/respawn.sh /usr/local/bin/respawn.sh
---> Using cache
---> ac699b6669c5
Step 9/11 : COPY .common/Release.key /tmp/Release.key
---> Using cache
---> d9a32994c25b
Step 10/11 : RUN apt-key add /tmp/Release.key && rm /tmp/Release.key &&
echo "deb " $OSMOCOM_REPO " ./" >
/etc/apt/sources.list.d/osmocom-nightly.list
---> Using cache
---> 3d332cfc1d3f
Step 11/11 : ADD $OSMOCOM_REPO/Release /tmp/Release
---> Using cache
---> 07602bcd9139
[Warning] One or more build-args [OSMO_GBPROXY_BRANCH OSMO_HNODEB_BRANCH OSMO_SGSN_BRANCH
OSMO_BSC_BRANCH OPEN5GS_BRANCH OSMO_HNBGW_BRANCH OSMO_NITB_BRANCH OSMO_PCU_BRANCH UID
DISTRO OSMO_STP_BRANCH USER OSMOCOM_REPO_TESTSUITE_MIRROR OSMO_HLR_BRANCH
OSMO_TTCN3_BRANCH OSMO_GSM_TESTER_BRANCH OSMO_MSC_BRANCH OSMO_UECUPS_BRANCH
OSMO_GGSN_BRANCH OSMO_SIP_BRANCH OSMO_BB_BRANCH OSMO_IUH_BRANCH OSMO_MGW_BRANCH
LIBOSMOCORE_BRANCH OSMO_BTS_BRANCH OSMO_CBC_BRANCH OSMOCOM_REPO_VERSION] were not
consumed
Successfully built 07602bcd9139
Successfully tagged osmocom-build/debian-bullseye-build:latest
rm -rf .common
make: Leaving directory
'<https://jenkins.osmocom.org/jenkins/job/ttcn3-pcap-client-test/ws/debian-bullseye-build'>
+ docker_image_exists debian-bullseye-build
+ docker images -q osmocom-build/debian-bullseye-build
+ test -n 07602bcd9139
+ list_osmo_packages debian-bullseye debian-bullseye-build
+ local distro=debian-bullseye
+ local image=debian-bullseye-build
+ local docker_run_sh=docker run --rm --entrypoint=/bin/sh
osmocom-build/debian-bullseye-build -c
+ [ -n ]
+ return
+ docker_distro_from_image_name osmo-pcap-master
+ echo debian-bullseye
+ distro_arg=debian-bullseye
+ [ -z ]
+ docker_upstream_distro_from_image_name osmo-pcap-master
+ echo debian:bullseye
+ upstream_distro_arg=debian:bullseye
+ docker_dir_from_image_name osmo-pcap-master
+ echo osmo-pcap-master
+ dir=osmo-pcap-master
+ pull_arg=--pull
+ grep ^FROM ../osmo-pcap-master/Dockerfile
+ from_line=FROM $USER/$DISTRO-build
+ echo FROM $USER/$DISTRO-build
+ grep -q $USER
+ pull_arg=
+ echo Building image: osmo-pcap-master (export NO_DOCKER_IMAGE_BUILD=1 to prevent this)
Building image: osmo-pcap-master (export NO_DOCKER_IMAGE_BUILD=1 to prevent this)
+ make -C ../osmo-pcap-master BUILD_ARGS= UPSTREAM_DISTRO=debian:bullseye
DISTRO=debian-bullseye IMAGE=osmocom-build/osmo-pcap-master
make: Entering directory
'<https://jenkins.osmocom.org/jenkins/job/ttcn3-pcap-client-test/ws/osmo-pcap-master'>
awk: fatal: cannot open file `.release' for reading (No such file or directory)
awk: fatal: cannot open file `.release' for reading (No such file or directory)
awk: fatal: cannot open file `.release' for reading (No such file or directory)
rm -rf .common
cp -r <https://jenkins.osmocom.org/jenkins/job/ttcn3-pcap-client-test/ws/common>
.common
INFO: .release created
release=0.0.0
docker build \
--build-arg USER=osmocom-build \
--build-arg UID=1000 \
--build-arg
REGISTRY=registry.osmocom.org \
--build-arg OSMO_TTCN3_BRANCH=master \
--build-arg UPSTREAM_DISTRO=debian:bullseye \
--build-arg DISTRO=debian-bullseye \
--build-arg
OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \
--build-arg OSMOCOM_REPO_PATH=packages/osmocom: \
--build-arg OSMOCOM_REPO_VERSION=latest \
--build-arg
OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \
--build-arg LIBOSMOCORE_BRANCH=master \
--build-arg OSMO_BB_BRANCH=master \
--build-arg OSMO_BSC_BRANCH=master \
--build-arg OSMO_BTS_BRANCH=master \
--build-arg OSMO_CBC_BRANCH=master \
--build-arg OSMO_GBPROXY_BRANCH=master \
--build-arg OSMO_GGSN_BRANCH=master \
--build-arg OSMO_GSM_TESTER_BRANCH=master \
--build-arg OSMO_HLR_BRANCH=master \
--build-arg OSMO_HNBGW_BRANCH=master \
--build-arg OSMO_HNODEB_BRANCH=master \
--build-arg OSMO_IUH_BRANCH=master \
--build-arg OSMO_MGW_BRANCH=master \
--build-arg OSMO_MSC_BRANCH=master \
--build-arg OSMO_NITB_BRANCH=master \
--build-arg OSMO_PCU_BRANCH=master \
--build-arg OSMO_SGSN_BRANCH=master \
--build-arg OSMO_SIP_BRANCH=master \
--build-arg OSMO_STP_BRANCH=master \
--build-arg OSMO_UECUPS_BRANCH=master \
--build-arg OPEN5GS_BRANCH=main \
-t osmocom-build/osmo-pcap-master:latest .
Sending build context to Docker daemon 26.11kB
Step 1/14 : ARG USER
Step 2/14 : ARG DISTRO
Step 3/14 : FROM $USER/$DISTRO-build
---> 07602bcd9139
Step 4/14 : ARG DISTRO
---> Using cache
---> 8bf68a78875b
Step 5/14 : RUN case "$DISTRO" in debian*) apt-get update &&
apt-get install -y --no-install-recommends libosmocore-dev libzmq3-dev
&& apt-get clean ;; centos*) dnf install -y
"pkgconfig(libosmocore)" "pkgconfig(libosmoctrl)"
"pkgconfig(libosmogb)" "pkgconfig(libosmogsm)"
"pkgconfig(libosmovty)" "pkgconfig(libzmq)" ;; esac
---> Running in b7ac921fc306
cgroups: cgroup mountpoint does not exist: unknown
../make/Makefile:90: recipe for target 'docker-build' failed
make: *** [docker-build] Error 1
make: Leaving directory
'<https://jenkins.osmocom.org/jenkins/job/ttcn3-pcap-client-test/ws/osmo-pcap-master'>
+ exit 1
Build step 'Execute shell' marked build as failure
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found.
Configuration error?